• Journal of the Korean Society for Precision Engineering
• /
• v.17 no.4
• /
• pp.203-208
• /
• 2000

2진 로봇 머니퓰레이터는 기하학적 형상이 가변트러스 구조로 되어 있으며 조인트의 구동원으로 사용되는 엑츄에이터는 2가지의 변위, 즉 최대 및 최소 변위만으로 동작한다. 따라서 작업영역은 연속적으로 주어지는 일반 로봇 머니퓰레이터와는 달리 유한 개의 위치 벡터의 집합 형태로 나타난다. 기존의 역기구학적 해석방법을 적용하기 어려운 2진 로봇 머니퓰레이터의 불연속적인 특성에 대해 새로운 작업영역과 역기구학 문제를 정의하였다. 유전 알고리즘을 사용하여 새로이 정의된 문제의 역기구학적 해석을 수행하였으며 유전 알고리즘이 2진 로봇 머니퓰레이터의 역기구학적 해석에 있어서 효과적이고 강건한 방법임을 보여주었다.

• Proceedings of the Korean Society of Computer Information Conference
• /
• 2014.07a
• /
• pp.259-260
• /
• 2014

IT 기술의 발달로 인해 로봇공학은 전문가의 영역에서 비전문가의 영역까지 두루 사용되고 있다. 그러나 현재 존재하는 소프트웨어는 여전히 높은 진입 장벽을 가지고 있다. 비전문가가 실질적으로 참고자료가 많이 부족하기 때문에 로봇 제어가 쉽지 않다. 본 논문에서는 5 자유도를 가진 로봇 팔을 움직이게 할 때 사용하는 기존의 역기구학(Inverse Kinematics)을 활용하여 기존 방법의 난도보다 직관적인 방법을 제시하여 비전문가들에게 로봇에 대한 높은 접근성을 제시한다.

• Annual Conference of KIPS
• /
• 2022.05a
• /
• pp.298-300
• /
• 2022

4족 보행 로봇의 보행을 이해하기 위하여 역기구학 분석은 필수적인 요소이다. 본 논문에서는 각 다리가 3개의 자유도를 갖는 보행 로봇에 대한 역기구학을 직관적인 방법으로 해석하여 제공한다. 또한 다리의 끝단에 대응하는 관절 각도를 계산하는 프로그램을 개발하였으며 관련된 입출력 값들의 관계를 그래프 형태로 확인하였다.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.7 no.1
• /
• pp.104-111
• /
• 1998

This study solves the inverse kinematics problem of industrial FANUC robot. Because every joint angle of FANUC robot is dependent on the position of end-effector and the direction of approach vector, arm metrix T6 is very complicated and each joint angle is a function of other joint angles. Therefore, the inverse kinematics problem can not be solved by conventional methods. Noticing the fact that if one joint angle is known, the other joint angles are calculated by the algebraic methods. $ heta$1 is calculated using neumerical analysis method, and solves inverse kinematics problem. This proposed method, in this study, is more simpler and faster than conventional methods and is very useful in the real-time control of the manipulator.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2004.10a
• /
• pp.929-934
• /
• 2004

As 3D scanner develops, it can be used in measurement. To accomplish complete 3D measurement, the scanner has to view different sides of the target. It can be done by moving the scanner and fix it at every measuring point. By human, it would take so much time. However, by using robot, measuring time can be reduced and the procedure can be automated. It is suitable for 6R serial manipulator to do this kind of work in which the scanner should go any position in arbitrary orientation. We did inverse kinematics analysis by analytical and graphical methods. Then, we compared two methods.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2010.05a
• /
• pp.307-308
• /
• 2010

• CDE review
• /
• v.23 no.1
• /
• pp.52-57
• /
• 2017

• Proceedings of the KSME Conference
• /
• 2005.11a
• /
• pp.191.1-191.1
• /
• 2005

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.32 no.2
• /
• pp.202-208
• /
• 2008

A 6 DOF Multi axis simulation table (MAST) is used to perform vibration and fatigue tests for parts or assemblies of automobiles, aircraft, or other systems. It consists of a table and 6 linear actuators. For its attitude control, we have to adjust the lengths of 6 actuators properly. The system is essentially a parallel mechanism. Three actuators are connected to the table directly and other three actuators are connected indirectly. Because of these, the MAST shows also a serial mechanism#s property: the inverse kinematics is more complicated than a pure parallel mechanism and each actuator can operate independently. The authors have performed a kinematics analysis of the 6 DOF MAST. We have presented an analytical and a numerical solution for the inverse and forward kinematics, and we have verified the solutions by a 3D CAD software.

• Journal of the Korean Society for Precision Engineering
• /
• v.29 no.10
• /
• pp.1119-1127
• /
• 2012

In this paper, we present an inverse kinematics of a 7-dof Anthropomorphic robot arm using conformal geometric algebra. The inverse kinematics of a 7-dof Anthropomorphic robot arm using CGA can be computed in an easy way. The geometrically intuitive operations of CGA make it easy to compute the joint angles of a 7-dof Anthropomorphic robot arm which need to be set in order for the robot to reach its goal or the positions of a redundant robot arm's end-effector. In order to choose the best solution of the elbow position at an inverse kinematics, optimization techniques have been proposed to minimize an objective function while satisfying the euler-lagrange equation.