• Proceedings of the Korean Statistical Society Conference
• /
• 2002.05a
• /
• pp.7-12
• /
• 2002

경제활동인구조사에서 시군구의 실업자를 추정하는데 소지역 추정법을 이용하는 방안에 대한 연구는 관심의 대상이 되고 있다. 본 연구에서는 합성 추정법과 복합 추정법을 이용한 시군구 실업통계 작성법을 소개하였고 추정량이 편향이므로 잭나이프 방법을 이용한 추정량의 정도를 계산하는 절차를 설명하였으며, 광주광역시의 구별 실업통계작성을 사례로 제시하였다.

• Journal of the Society of Naval Architects of Korea
• /
• v.35 no.1
• /
• pp.40-45
• /
• 1998

There are two kinds of methods in the analysis of ship motion in irregular waves. The one is the spectral method in which the ship motion is assessed with spectral of irregular waves times R.A.O. of a ship. The other is, so called, time domain analysis, in which the irregular waves are used directly in the equation of ship motion to calculate the responses. In this paper, both methods are applied for the calculation of course keeping motion of a ship in irregular waves with auto-pilot control. And, the differences and useful1ness of the two methods in the assessment of auto-pilot system are compared.

• Spatial Information Research
• /
• v.2 no.1
• /
• pp.47-51
• /
• 1994

The purpose of the study is to establ ish models of land Cover (use) prediction system for development and management of land resources using remotely sensed data as well as ancillary data in the context of multi-dis¬ciplinary approach in the application to CheJoo Island. The model adopts multi-date processing techniques and is a spatial/temporal land-Cover projection strategy emerged as a synthesis of the probability tra-nsition model and the discrimnant-analys is model. A discriminant modelis applied to all pixels in CheJoo landscape plane to predict the most likely change in land Cover. The probability transition model provides the number of these pixels that will convert to different land Cover in a given future time increment. The syntheric model predicts the future change in land Cover and its volume of pixels in the landscape plane.

• Tunnel and Underground Space
• /
• v.15 no.5 s.58
• /
• pp.344-351
• /
• 2005

Direct back analysis software is coded based on Simplex method using FLAC as a subroutine. For the verification of the software, 12 different cases are assumed combining various displacements in different measuring locations around a tunnel. The number of displacements for cases varies from 3 to 240. It is verified that the exact elasticity and the primary stress state of rock around a tunnel could be found through iterative calculation regardless of the locations and number of displacements and initial values needed for the direct back analysis.

• Applied Chemistry for Engineering
• /
• v.28 no.3
• /
• pp.351-354
• /
• 2017

An experimental design method was used to optimize the synthesis of gamma-alumina with a superior thermal stability using the reverse micelle method. First, twelve experimental conditions were derived by using the mixture design method to optimize conditions for the ratio of surfactant, water and oil, which are main factors in the synthesis process. When the particles synthesized by reverse micelle method were calcined at $900^{\circ}C$ under the designed condition, they all had gamma-alumina crystal structure although there were differences in particle sizes. The coefficient of determination of the second-order regression model using the derived experimental results was 93.68% and the P-value was 0.002. The synthesis conditions forgamma-alumina with various particle sizes were presented using surface and contour lines. As a result, it was calculated that the smallest particle size of about 2.8 nm was synthesized when the ratio of surfactant/water/oil was 0.3450/0.0729/0.5821.

• Geophysics and Geophysical Exploration
• /
• v.3 no.2
• /
• pp.70-75
• /
• 2000

In the seismic migration, Kirchhoff and reverse time migration are used in general. In the reverse time migration using wave equation, two-way and one-way wave equation are applied. The approach of one-way wave equation uses approximately computed downward continuation extrapolator, it need tess amounts of calculations and core memory in compared to that of two-way wave equation. In this paper, we applied one-way wave equation to pre-stack reverse time migration. In the frequency-space domain, forward propagation of source wavefield and back propagration of measured wavefield were executed by using monochromatic one-way wave equation, and zero-lag cross correlation of two wavefield resulted in the image of subsurface. We had implemented prestack migration on a massively parallel processors (MPP) CRAYT3E, and knew the algorithm studied here is efficiently applied to the prestck migration due to its suitability for parallelization.

• Proceedings of the KIEE Conference
• /
• 2007.07a
• /
• pp.659-660
• /
• 2007

전력계통의 고장계산에는 상호 결합된 삼상회로를 결합이 없는 단상회로 3개, 즉 영상, 정상, 역상의 대칭요소로 변환하여 해석하는 대칭좌표법이 널리 사용되고 있다. PSS/E는 국내 전력회사에서 고장 계산을 위해 널리 사용되어온 상용 프로그램이며, 고장계산 결과는 차단기 등 각종 기기의 정격의 결정 등에 이용된다. 특수한 경우에 지락사고 해석시 과도한 안전여유를 고려하는 것이 필요한 경우가 있다. 본 논문에서는 송전선로 지락시 등가 전원단 용량이 임의로 증가했을 때에 송전선로 중간의 임의 지점의 지락고장전류를 계산하는 수식을 유도하였으며, PSS/E 계산값과의 비교를 통해 계산방법의 신뢰성을 검증하였다.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.15 no.5
• /
• pp.1640-1648
• /
• 1991

본 연구에서는 이러한 편사 함수 최소화의 방법을 적용함에 있어 보다 안정된 수렴성과 계산 시간을 단축시키기 위하여 근접 위치 방법(near position method)을 개 발하여 적용하였다. 근접 위치 방법이란 이론적 해석법으로 풀기가 불가능한 기구학 을 갖는 6관절 로봇을 반복적 해석법을 사용한다는 것을 전제로 하여, 초기 위치를 목 표 위치에 가능한 근접하게 잡아서 반복 계산을 수행하는 방법으로써 로봇의 기구학적 자세에 따른 수렴의 불안정성을 방지하고, 계산 시간을 단축하는데 그 목적이 있다.

• Proceedings of the Korean Society of Coastal and Ocean Engineers Conference
• /
• 2000.09a
• /
• pp.120-125
• /
• 2000

연안역의 토지이용이 극대화됨에 따라 연안구조물이나 항만구조물의 축조가 활발히 진행되고 있다. 이를 설계하는데 있어서 무엇보다 중요한 것은 천해설계파 등과 같은 파랑변형계산을 얼마만큼 실현상과 근사시켜 재현할 수 있는지의 여부에 달려 있다. 지금까지의 천해설계파 산정에 있어서는 주로 단일 주파수와 단일 방향에 대한 규칙파해석이 수행되어져 왔으나, 실제해역에서의 파랑은 수많은 주파수와 파향, 파고들이 합성되어 이루어진 다방향 불규칙파랑이므로 실제 해역의 자연현상이 잘 표현되었다고 보기는 어렵다. (중략)

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.20 no.1
• /
• pp.65-73
• /
• 2007

In the inverse perturbation method, enormous computational resource was required to obtain reliable results, because all unspecified DOFs were considered as unknown variables. Thus, in the present study, a reduced system method is used to condense the unspecified DOFs by using the specified DOFs, and to improve the computational efficiency as well as the solution accuracy. In most of the conventional reduction methods, transformation errors occur in the transformation matrix between the unspecified DOFs and the specified DOFs. Thus it is hard to obtain reliable and accurate solution of inverse perturbation problems by reduction methods due to the error in the transformation matrix. This numerical trouble is resolved in the present study by adopting iterative improved reduced system(IIRS) as well as by updating the transformation matrix at every step. In this reduction method, system accuracy is related to the selection of the primary DOFs and Iteration time. And both are dependent to each other So, the two level condensation method (TLCS) is selected as Selection method of primary DOFs for increasing accuracy and reducing iteration time. Finally, numerical verification results of the present iterative inverse perturbation method (IIPM) are presented.