• Title/Summary/Keyword: 여수 지역

Search Result 311, Processing Time 0.022 seconds

Analysis of the cooling and heating degree days in the Seoul and Yeosu, where HadCM3 is applied (서울과 여수지역에 HadCM3를 적용한 냉」난방도일의 변화량 분석)

  • Yoo, Ho Chun;Noh, Kyoung Hwan
    • KIEAE Journal
    • /
    • v.9 no.4
    • /
    • pp.11-16
    • /
    • 2009
  • To act and respond to the climate changes and to bring about power-saving in buildings, the changes in the atmospheric data in Korea are recorded and assessed. For the two regions representative of Korea, the data obtained from HadCM3 and actual data are compared and analyzed so as to concretely evaluate and confirm the changes taking place in the cooling and heating degree days in Korea. For the past 40 years, from 1996 to 2005, the number of heating degree days was on the decline and in the two representative regions, between 1980's and 1990's, the number of decrease in the heating degree days had been quite large. The number of cooling degree days showed a trend of increase since the 1970's and just as in the case of heating degree days, the extent of increase was quite large between the 1980's and the 1990's. The results of comparison of the number of heating and cooling degree days, one obtained from the "Korea Meteorological Administration" and another from the HadCM3 data (E127.5,N37.5,E127.5,N35), which is one of the ways of predicting the climate, showed similar trends in the number of heating degree days in the Yeosu area. However, in the case of the number of heating degree days in Seoul and the number of cooling degree days both in Seoul and Yeosu, the differences in the number ranged from a minimum of 300 days to a maximum of 1500 days. This could be attributed to the grid points used in the HadCM3, the differences in the values of latitudes and longitudes of these two locations considered in this study, topographical differences, heat island effect caused by population density etc. and while using the HadCM3, these variables factors must be taken into consideration.

Building of GIS Program for Controlling Oil Spill Accident (해양 유출유 사고 방제 지원 GIS 프로그램 개발)

  • Kim, Hye-Jin;Lee, Han-Jin;Lee, Moon-Jin
    • Journal of the Korean Association of Geographic Information Studies
    • /
    • v.9 no.3
    • /
    • pp.58-66
    • /
    • 2006
  • Environmental Sensitivity Index Map(ESI Map) is useful information for efficient and prompt contolling of oil spill accident. Environmental sensitivity information relating to oil spill is very various, so efficient access and utilization for environmental sensitivity information at control field is required. In order to improve the efficiency of controlling accident at the field, it is necessary to building digital ESI Map and GIS program. In this study, GIS database was built to utilize environmental sensitivity information at Yeosu and Gyunggi bay. And the ESI Map program which is focused on the control job was developed. IMO/IPIECA's guide to make the ESI Map and Korea Coast Guard's guide to collect information for the control information map were referenced to capture environmental sensitivity data and build GIS database. The symbology of environmental sensitivity layers was defined and functions for supporting control job were implemented in ESI Map program. For the future works, the program in this study could be applied to ESI Map program for the whole coastal area of Korea and it could be the essential element technology in marine pollution control supporting system.

  • PDF

First Record of the Cutlass Fishes, Benthodesmus tenuis (Perciformes: Trichiuridae) from Korea (한국산 갈치과 어류 1 미기록종, Benthodesmus tenuis)

  • Kim, Maeng Jin;Choi, Jung Hwa;Oh, Tag Yun;Kim, Jung Yun;Lee, Dong Woo
    • Korean Journal of Ichthyology
    • /
    • v.24 no.4
    • /
    • pp.302-305
    • /
    • 2012
  • Two specimens (332.0~377.6 mm in standard length) of Benthodesmus tenuis (G$\ddot{u}$nther), belonging to the family Trichiuridae, firstly collected in off Heuksan-do and Yeosu, Jeollanam-do by the bottom trawl. This species was characterized by the following morphological traits: 125~126 dorsal fin rays (vs. 144~155 for B. pacificus), I, 73 anal fin rays (vs. 91~101), interorbital region flat (vs. interorbital region with prominent crest for A. anzac), opercular black and caudal fin forked. We propose a new Korean name, "Se-jang-gal-chi-sok" and "Se-jang-gal-chi" for the genus and species, respectively.

Distributional Characteristics of the Meiobenthic Community in Gamak Bay in the South Sea, Korea (남해안 여수 가막만에 서식하는 중형저서동물의 분포 특성)

  • Lee, Heegab;Min, Won Gi;Rho, Hyun Soo;Oh, Je hyeok;Kim, Dongsung
    • Korean Journal of Environmental Biology
    • /
    • v.34 no.2
    • /
    • pp.79-90
    • /
    • 2016
  • This study investigates seasonal variation and spatial distribution of meiobenthic community of Gamak Bay (one of the major bays of southern coastal area of Korea). Total of 6 surveys of 10 stations took place, once in February, June and October of 2009 and through 2010. Community structure, taxon diversity (H') and nematodes/copepods ratio of meiobenthos were studied in Gamak Bay. During the study period, nematodes and harpacticoids were the most dominant taxa among the meiofaunal groups in Gamak Bay. Taxon diversity (H') was the highest at the outer stations and the lowest at the inner stations in the Gamak Bay. The nematodes/copepods ratio was seasonally studied as an index of pollution monitoring for the benthic ecosystem at each station. As a result, nematodes/copepods ratio was the highest at the inner stations and the lowest at the outer stations in Gamak Bay.

Health Status and Improvement Measures for Irregular Plant Construction Workers at Yeosu National Industrial Complex (여수지역 비정규직 플랜트 건설 근로자의 안전보건 실태와 개선방안)

  • Choi, Sangjun;Kim, Shin-Bum
    • Journal of Korean Society of Occupational and Environmental Hygiene
    • /
    • v.19 no.3
    • /
    • pp.182-194
    • /
    • 2009
  • This study was conducted to evaluate health status and to propose health protection measures of irregular plant construction workers in Yoesu National Industrial Complex (YNIC). The status of safety and health management was examined in five areas including safety and health education, work environment monitoring, health examination, health management record, and personal protective equipment (PPE) for plant construction workers. The safety training rate for plant construction workers was reached high at 91%, The training was mostly consisted of safety accident related things, but training on hazardous materials was found to be insufficient. Workplace monitoring results showed that the compliance rate for work environment for irregular construction workers was 54% and workplace monitoring during turnaround (TA) period with high risk of exposure to hazardous agents has not been implemented. While 61.4% of irregular workers received the general health examination but only 36.8% received the special health examination. The special health examination was found to be conducted only upon welders from 2-3 years ago. The issue of health management record upon irregular construction workers was not being implemented. In case of PPE, basic safety protective equipments such as safety shoes, safety belt, safety helmet were being supplied well while the supply rate of respirator for organic vapor was relatively low at 40%. Based on this study, two suggestions to maximize the utilization of the current safety and health program were made while boosting its effectiveness in protecting workers' health. First, the role of owners (petrochemical plant) related to safety and health should be strengthened. Second, in consideration of the characteristics of construction workers who usually engage in short term employment and frequent movement, community based health management organization is suggested that can overcome such structural problem and carry out the implementation of health examination and sustained health management.

The Bicycle Road Route Selection which Considers the Slope Standard of the Bicycle Road (자전거도로의 경사기준을 고려한 자전거도로 노선 선정)

  • Baik, Seung-Heon;Han, Dong-Yeob;Jin, Hong-Seong
    • Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
    • /
    • v.29 no.6
    • /
    • pp.553-559
    • /
    • 2011
  • The bicycle use activation plan reduces a greenhouse gas exhaust, and economic convenience, movement timely shortening, health effect will be able to expect but the bicycle user is few. The nationwide bicycle road projects is advanced by the countermeasure for a bicycle use activation. It is advanced a bicycle road basic plan even from each local government. The research against a route selection is advanced actively. But the research against a data process is not coming out the accurate research method. It follows a financial one bicycle road design standard from ministry of land, Transport and maritime affairs. But vertical grade in bicycle road design standard is exception becoming that about unavoidable case with geomorphic environments. From the research which it sees the existing bicycle road consider should have to make the terrain situation of yeosu, slope standard connection about under considering it presented the bicycle road route selection which is possible. It included a lane and road width with additional element and establishment in the bicycle road was produced suitable bicycle road route. The area where the mountain district is many when selecting bicycle road, will be used with application plan of slope standard.

Gate Operation Rule of Paldang Dam by Considering Discharge and Downstream Flow Pattern (방류량 및 하류부유황을 고려한 팔당댐의 수문조작기준 선정)

  • 서규우;이종설
    • Water for future
    • /
    • v.29 no.2
    • /
    • pp.209-219
    • /
    • 1996
  • The existing gate operation rule of Paldang hydroelectric plant has been used since the construction of the dam in 1973 except partial modification due to the construction of Chungju multipurpose dam in 1985. The water level near the downstream of Paldang dam has been lowered about 3 m because of the channel maintenance of Han River development project. Thus, the discharge estimation formula based on the submerged orifice type spillway has to be re-evaluated by considering various patterns of the gate operation rules and lowered channel bed. In this study, three types of gate openings were tested to select the proper gate operation rules through the hydraulic model test for various discharges and opening heights. Also, the numerical analysis has been performed to simulate the flow patterns of downstream. As a result, the gate operation rule, which opens 5 gates each time from the left side, was selected as the proper gate operation rule of Paldang dam.

  • PDF

Prediction of Ultimate Scour Potentials in a Shallow Plunge Pool (얕은 감세지내의 극한 세굴잠재능 예측)

  • 손광익
    • Water for future
    • /
    • v.27 no.1
    • /
    • pp.123-131
    • /
    • 1994
  • A plunge pool is often employed as an energy-dissipating device at the end of a spillway or a pipe culvert. A jet from spillways or pipes frequently generates a scour hole which threatens the stability of the hydraulic structure. Existing scour prediction formulas of plunge pool of spillways or pipe culverts give a wide range of scour depths, and it is, therefore, difficult to accurately predict those scour depths. In this study, a new experimental method and new scour prediction formulas under submerged circular jet for large bed materials with shallow tailwater depths were developed. A major variale, which was not used in previous scour prediction equations, was the ratio of jet size to bed material size. In this study, jet momentum acting on a bed particle and jet diffustion theory were employed to derive scour prediction formulas. Four theoretical formulas were suggested for the two regions of jet diffusion, i.e., the region of flow establishment and the region of established flow. The semi-theoretically developed scour prediction formulas showed close agreement with laboratory experiments performed on a movable bed made of large spherical particles.

  • PDF

Spillway Design by Using Hydraulic and Numerical Model Experiment - Case Study of HwaBuk Multipurpose Dam (수리 및 수치모형실험을 이용한 여수로 설계 - 화북다목적댐)

  • Kim, Dae-Geun;Choi, Ji-Woong;Kim, Chang-Si;Lee, Ji-Won
    • Journal of Korea Water Resources Association
    • /
    • v.38 no.3 s.152
    • /
    • pp.179-188
    • /
    • 2005
  • This study on the HwaBuk Multipurpose Dam showed that two- and three- dimensional numerical model experiments, as well as hydraulic model experiments, can be useful analysis tools for engineers. A commercially available RMA2, which solves the shallow water equations, and FLOW-3D, which solves the Reynolds averaged Navier-Stokes equations, were used to simulate the hydraulic model setup. Numerical simulation results on the following were compared with the hydraulic model results: the flow in the reservoir basin and the approaching channel; the discharge in the overflow weir; the water surface profiles in the rollway, chute, and stilling basin; and the pressure distributions in the rollway. It was shown that there is a reasonably good agreement between the numerical model and the hydraulic model for the most of computations. There were, however, some differences between the numerical simulation results and hydraulic model results for the hydraulic jump in the stilling basin because of air entrainment effect.

Comparison on the ritual food of Yeosu and Pusan area (여수와 부산지역의 제수 비교)

  • Jung Bok-Mi
    • Korean journal of food and cookery science
    • /
    • v.21 no.3 s.87
    • /
    • pp.271-282
    • /
    • 2005
  • In this study a survey was conducted to compare the foods prepared for the Korean ancestral service on Memorial Day, Thanksgiving Day and New Year's Day in the Yeosu and Pusan areas. Me(tap) as the main food in the rituals was highly used on New Year's Day in the Pusan region, whereas Tteokguk was highly used in the Yeosu region. As for soup ingredients in the rituals, jogae, soegogi and mu were more frequently used in the Pusan region than in the Yeosu region on Memorial Day and festive days. Jogijjim, gaorijjim, sangeojjim, myeongtaejjim, galbijjim, dakjjim, and bugeojjim were highly used in the Yeosu region but cheongeojjim and domijjim were highly used in the Pusan region. Gosari and doraji namul were highly used in both regions but most vegetables were hishly used in the fきn region except for sukju and chwi namul. Jogi gui was the most common in both regions, whereas seodae, yangtae and byeongeo-gui were highly used in the Yeosu region but dubu, jogi and mineo-gui were highly used in the Pusan region. Songpyeon injeolmi, gangjeong, and yakgwa were highly used in the Pusan region. Most fruits except apple were highly used in the Pusan region. With regard to the liquor used for the rituals, there was no difference in the use of cheongju between the two areas, whereas takju was highly used in the Pusan region but soju was highly used in the Yeosu region. The results of this study showed that the use of ritual foods varied a little according to the region and that ritual food use was based on seasonal foods, preference of ancestors, and special products of the region.