• Journal of the Korean Society of Propulsion Engineers
• /
• v.21 no.5
• /
• pp.97-107
• /
• 2017

Fluid dynamic constant volume combustion technology detonation has been paid attention as a "game-changing" technology to overcome the efficiency and performance limitation of the present constant pressure combustion systems. For the past several years, a number of experimental and CFD-based theoretical studies have been conducted for the basic operation tests of RDE's. Present paper include a comprehensive survey on the research activities on RDE and its core technologies comprehensively to provide a direction for the future RDE researches, yet unfamiliar domestically.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.20 no.5
• /
• pp.694-700
• /
• 2010

This paper proposes the intelligent shift algorithm for automatic transmissions and develops the simulator for the its optimization and analysis. It provides the comfortable ride to drivers and improves the driving force efficiency without any loss of the performance. In addition, the developed simulator not only cuts the commercialization cost but provides diverse test conditions. The analysis and optimization of the proposed scheme are verified by the developed simulator. As a simple example, the developed simulator verifies the proposed algorithm and shows the comparative result with the existed automatic transmission shift algorithm.

• Journal of Korea Game Society
• /
• v.19 no.3
• /
• pp.15-24
• /
• 2019

Many limitations arise when using washout algorithms to calibrate input values in VR content-making environments using VR HMD and motion platforms. Thus, in this study, we designed a new fabrication method using a control object that turns acceleration into a rotational motion. A total of 30 people were tested to see if the improved method was better than the existing one. The results showed significant differences that the improved method is better for realism, immersion and ride comfort.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2004.05a
• /
• pp.873-876
• /
• 2004

사람의 동작을 인식하는 것에 대한 연구는 게임, 유비쿼터스 컴퓨팅 등의 발전에 따라 그 중요성이 증가하고 있다. 그러나, 대부분의 기존 연구에서는 극히 소수의 동작만을 정의하거나 특정 부위의 동작만을 다루므로 실제 응용에 적용하기에는 적합하지 않다. 본 논문에서는 특정 도메인의 사용 없이, 카메라 영상 입력으로 취득된 동작 패턴 정보만을 이용하여 40종 전신 연속 동작을 구분하는 동작인식 방법을 연구하였다. 인식에 사용된 입력 데이터는 동작자 관절들의 위치 및 회전 값들이며, 다수의 동작들을 인식하기 위해서는 기존의 인식 알고리즘들인 특징기반 인식, HMM, 신경망(Neural Network)등을 사용하여 복합적인 인식 엔진을 구성하여야 했다. 입력 데이터별로 적합한 인식 모듈을 거치게 하기 위해서는, 동작에 의한 입력 데이터에서 동작자 움직임의 주요 신체 부위를 추출함으로써 입력 데이터가 해당 그룹의 인식 모듈로 자동적으로 분류되게 하는 방법을 사용한다. 이는 다층의 인식 레이어 중 복잡도가 증가하는 하위 레이어일수록 자동 분류에 의해 걸러진 데이터만을 취급하게 되므로 효과적이다. 전체 실험 결과 단계별로 약 79~97%의 인식률을 보였다. 이는 향후 특정 컨텍스트 정보와 결합할 때 매우 높은 인식률을 기대할 수 있게 하는 수치이다.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.22 no.2
• /
• pp.240-245
• /
• 2016

This paper describes the rheological behavior study such as viscosity and change of shear stress regarding marine lubricating oil according to the amount of Marine Gas Oil (MGO) dilution. The viscosity reduction due to fuel dilution is crucially important characteristic to decreasing engine durability because of the abrasion of piston ring or liner. The lubricating oil used in this paper was blended with magnetic stirrer diluted High Sulfur Diesel (HSD, 0.05 wt%) ratio of 3 %, 6 %, 10 %, 15 % and 20 %. The viscosity and shear stress of diluted lubricating oil were measured with the temperature range from $-10^{\circ}C$ to $80^{\circ}C$ using a rotary viscometer (Brookfield Viscometer). As the amount of MGO dilution increasing in lubricating oil, the viscosity and stress of those decreased, because the lubricating oil diluted MGO with low viscosity show the trends to decreased viscosity and shear stress. Especially, the viscosity and shear stress of lubricating oil radically decreased at low temperature ($0{\sim}-10^{\circ}C$) and doesn't effect in MGO dilution at over $40^{\circ}C$. As temperature risen, the reduction of the viscosity and shear stress in lubricating oil shows the Newtonian behavior. The lubricating oil was required to check up periodically to improve engine durability since the viscosity reduction by MGO dilution accelerating the engine abrasion.

• Journal of Advanced Marine Engineering and Technology
• /
• v.40 no.4
• /
• pp.301-306
• /
• 2016

During the initial stage of propulsion shaft design, the shaft alignment process includes a thorough consideration of lateral vibration to verify the operational safety of the shaft. However, a theoretical method for analyzing forced lateral vibrations has not been clearly established. The methods currently used in classification societies and international standards can only ensure a sufficient margin to avoid the blade-passing frequency resonance speed outside the range of ${\pm}20%$ of the maximum continuous rating (MCR) for the engine. Typically, in shaft alignment analyses, longer center distances between the support bearings promote affirmative results, but the blade order resonance speed can approach the lower limit for lateral vibration. Therefore, this matter requires careful attention by engineers, and a verification of the theoretical analysis by experimental measurements is highly desirable. In this study, both theoretical and experimental analyses were conducted using strain gauges under two draught conditions of vessels used as 50,000-DWT oil/chemical tankers, introduced recently as eco-friendly ships. Based on the analyses, the influence of the lateral vibration on the shafting system and the system's reliability was reviewed.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.7 no.6
• /
• pp.1123-1129
• /
• 2003

The noise of maneuvering submarines or vessels can be divided into the tonal signals and broadband ambient noise. Tonal signals are from the revolution of motors and engines of vessels, and broadband ambient noise is from the bubbles which are generated by the propellers and the flow of water around vessels. We can analyze the kinds and the speed of vessels if we analyze the tonal signals and ambient noise. But, it is difficult to divide the tonal signals form the ambient noise when the power of tonal signal is much weaker than the power of ambient noise. In this paper, we detect the direction of arrival(DOA) of the noises generated by vessels with the automatic tracking window(ATW) preprocessing algorithm, and make a beam to the direction of the targets. We suggest a method which can separate weak tonal signals from broadband ambient noise with the ATW algorithm.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.10
• /
• pp.5899-5905
• /
• 2014

Faults in electric power system can be a critical problem for vehicles. The system durability is determined mainly by the durability of their components and operating conditions. Monitoring the conditions of the electric power system may be necessary because it is very difficult to predict precisely when it will fail. Therefore, the aim of this study was to develop a diagnosis system for an electric power system of a vehicle. The alternator voltage, excitation voltage, lamp voltage, battery voltage, and engine rpm from a crank angle sensor are monitored continuously and the system fault can be then detected in real time. NI USB- 9201 DAQ and LabVIEW SW have been used to measure the voltages and analyze the data. Compared to conventional measurements for only each component, an integrated and portable measurement method was developed. In addition to the monitoring the electric power system in real time, the saved data from the measurement also provides valuable information to improve the durability of the components.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.13 no.2
• /
• pp.498-503
• /
• 2012

It happens that the fuel is not injected when the driver doesn't push the acceleration pedal of vehicle with engine speed higher than 1,500rpm above the mid range of vehicle speed. This is called "fuel-cut function" and almost every modern vehicle is equipped with this function. This is activated frequently on the downhill area of highway and the quantity of vehicle-exhausted $CO_2$ gas can be zero on this area. With this fuel-cut function on the test highway, $CO_2$ gas from passenger car(2,000cc engine volume) can be reduced up to 4%. The fuel-cut function with CRUISE made in company AVL is simulated to find the most effective driving pattern on the downhill area. By simulating with CRUISE software, it is found that the lower limit of vehicle speed for fuel-cut should be raised to improve the fuel economy on the steeper downhill road. The fuel economy can be most economical when fuel-cut driving and reacceleration are completed on the section of downhill road.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.14 no.1
• /
• pp.16-22
• /
• 1994

In contrast to the machineries using rolling element bearings, systems with journal bearings generally operate in large scale and under severe loading condition such as steam generator turbines and internal combustion engines. Failure of the bearings in these machineries can result in the system breakdown. To avoid the time consuming repair and considerable economic loss, the detection of incipient failure in journal bearings becomes very important. In this experimental approach, acoustic emission monitoring is applied to the detection of incipient failure caused by several types of abnormal operating condition most probable in the journal bearing systems. It has been known that the intervention of foreign materials, insufficient lubrication and misassembly etc. are principal factors to cause bearing failure and distress. The experiment was conducted under such designed conditions as hard particles in the lubrication layer, insufficient lubrication, and metallic contact in the simulated journal bearing system. The results showed that acoustic emission could be an effective tool to detect the incipient failure in journal bearings.