• Journal of the Korean Chemical Society
• /
• v.44 no.3
• /
• pp.237-242
• /
• 2000

We have synthesized ester compounds from the soybean oil and some Polymer alcohol compounds and studied the physical properties of the synthesized esters. We have performed this experiment for the purpose of testing the physical properties by soybean oil ester compounds as a water-soluble metal working lubricant.In addition, we have studied siy, surface tension, viscosity for the synthesized ester compounds in aqueous solution state varying the mixing ratio of water.

• Membrane Journal
• /
• v.25 no.6
• /
• pp.496-502
• /
• 2015

Facilitated transport is one of the possible solutions to simultaneously improve permeability and selectivity, which is challenging in conventional polymer-based membranes. Olefin/paraffin separation using facilitated transport membrane has received much attention as an alternative solution to the conventional distillation process. Herein, we report olefin separation composite membranes based on the polymer blends containing $AgBF_4/Al(NO_3)_3$ mixed salts. Free radical polymerization process was used to synthesize an amphiphilic graft copolymer of poly(dimethyl siloxane)-graft- poly(ethylene glycol) methyl ether methacrylate (PDMS-g-POEM). In addition, poly(ethylene oxide) (PEO) was introduced to the PDMS-g-POEM graft copolymer to form polymer blends with various ratios. The propylene/propane mixed-gas selectivity and permeance reached up to 5.6 and 10.05 GPU, respectively, when the PEO loading was 70 wt% in polymer blend. The improvement of olefin separation performance was attributed to the olefin facilitating silver ions as well as the highly permeable blend matrix. The stabilization of silver ions in the composite membrane was achieved through the introduction of $Al(NO_3)_3$ which suppressed the reduction of silver ions to silver particles.

• Applied Chemistry for Engineering
• /
• v.30 no.5
• /
• pp.597-605
• /
• 2019

In order to improve the adhesion of water-based adhesive, gemini type nonionic reactive surfactants were synthesized and applied to water-based adhesives. The surfactants were synthesized by using maleic acid and polyoxyethylene cetyl ether having different length of ethylene oxide and confirmed by FT-IR and $^1H-NMR$. Their appearance was light yellow wax. The cloud point of the compound was more than $78^{\circ}C$. The measured critical micelle concentration (c.m.c) was $1.0{\times}10^{-4}{\sim}7.0{\times}10^{-4}mol/L$ and surface tension at c.m.c was 25.9~32.0 mN/m. As the number of ethylene oxide increased, the emulsifying power was improved. The foaming height of each compound by Ross-Miles method was 1.4~4.5 cm. The synthesized surfactants was then used as an emulsifier in emulsion polymerization of water-based adhesives and its physical properties were evaluated. The solid contents of prepared adhesives was 59%. The average particle size and initial tackiness of the prepared adhesives were 164~297 nm and ball no. of 20~32, respectively. The peel strength was $1.8{\sim}2.1kg_f/mm$. The retention rate of adhesives viscosity was evaluated to 99% during 30 days. Therefore, synthesized gemini type nonionic reactive surfactants are expected to be applied as an emulsifier for the high adhesive force.

• The Korean Journal of Rheology
• /
• v.5 no.2
• /
• pp.170-179
• /
• 1993

결정성 고분자/비결정성 고분자/충격보강재의 조합으로 이루어진 열가소성 삼성분계 블렌드의 미세구조 조절이 기계적 및 열적 거시물성에 미치는 영향을 살펴보았다. 결정성 고분자로는 나일론6를 비결정성 고분자로는 변성폴리페닐린 옥사이드(PPO)를 충격 보강재 로는 스티렌-에틸렌부틸렌-스티렌(SEBS) 삼중블록 공중합체를 사용하였고 비상용인 나일 론6와 변성 PPO 사이의 상용화를 위해 반능 상용화(reactive compatibilization)방법을 사용 하였다. 반응 사용화에 사용된 반응기로는 나일론의 말단기에 있는 친핵성기인 아민기와 반 응성이 높은 친전자성기인 무수말레인산(MAH)을 충격보강 고부 SEBS에 그라프트시켜 충 격보강 고무내의 SEBS-MAH의 함량을 증가시킴에 따라 처음에 PPO 분산상에 있던 고무 가 나일론 연속상으로 이동하는 현상을 관찰하였다. 이러한 충격보강 고부의 SEBS-MAH 함량 증가에 의한 PPO 분산상에서 나일론상으로의 이동이 내충격성의 향상 및 내열성의 저 하와 밀접한 관계가 있다는 것을 알았다.

• Journal of Ginseng Research
• /
• v.19 no.3
• /
• pp.231-236
• /
• 1995

The antioxidant activity and the pharmacologically active constituents such as nucleosides and phenolic substancs of Panax ginseng C.A. Meyer (white ginseng powder) treated with gamma irradiation (Rl group) and ethylene oxide fumigation (EO group) were compared with those of non-treated ginseng (control group). High performance liquid chromatograms of nucleosides in three groups were similar with each other. The bathochromic effect of phenolic substances at W absorption region tends to be higher for EO group than Rl group. This tendency was also observed in heat treatment of each group. However, the antioxidant activity may have some effects on the labile property of phenolic substances. In summary the gamma-irradiated ginseng was more stable than the ethylene oxide-treated ginseng, but both ginseng samples gave the similar antioxidant activity.

• Applied Biological Chemistry
• /
• v.51 no.2
• /
• pp.108-113
• /
• 2008

Azoxystrobin applied by aqueous WP suspension 50 mg/l was slightly absorbed into cucumber leaf in the absence of activator surfactant 24 h after spraying, but was increased to 25.7% by adding polyoxyethylene monohexadecyl ether (12 moles of ethylene oxide, CE-12) 500 mg/l. Only 4.1% of kresoxim-methyl WDG 100 mg/l in the absence of surfactant was absorbed into cucumber leaf 24 h after spraying, but was increased to 58.0% by adding polyoxyethylene monooctadecyl ether (14 moles of ethylene oxide, SE-14) 1,000 mg/l. The effect of CE-12 500 mg/l on foliar uptake of kresoxim-methyl at 50 mg/l was twice bigger than on azoxystrobin. Fungicidal activity of azoxystrobin WP against cucumber powdery mildew was marginally increased by adding surfactants to facilitate foliar uptake of azoxystrobin, so that the further increase of azoxystrobin uptake into cucumber plant by the addition of adjuvant was not a practical mean for enhancing the formulation efficacy in view of fungicidal activity. It was not possible for kresoxim-methyl to assess the adjuvant effect on the fungicidal activity in a greenhouse trial due to the vapor effect of active ingredient.

• Journal of the Korean Applied Science and Technology
• /
• v.31 no.4
• /
• pp.694-702
• /
• 2014

The micron-sized ITO(indium tin oxide) particles were prepared by spray pyrolysis from aqueous precursor solutions for indium, and tin and organic additives solution. Organic additives solution with citric acid(CA) and ethylene glycol(EG) were added to aqueous precursor solution for Indium and Tin. The obtained ITO particles prepared by spray pyrolysis from the aqueous solution without organic additives solution had spherical and filled morphologies whereas the obtained ITO particles with organic additives solution had more hollow and porous morphologies with increasing mole of organic additives. The micron-sized ITO particle with organic additives was changed fully to nano-sized ITO particle whereas the micron-sized ITO particle without organic additives was not changed fully to nano-sized ITO particle after post-treatment at $700^{\circ}C$ for 2 hours and wet-ball milling for 24 hours. The size of primary ITO particle by Debye-Scherrer formula and surface resistance of ITO pellet were measured.

• Applied Chemistry for Engineering
• /
• v.23 no.6
• /
• pp.521-528
• /
• 2012

In this study, we analyzed the physical properties of an ethylene oxide adducted amphoteric surfactant such as critical micelle concentration, surface tension, interfacial tension, contact angle, viscosity and phase behavior. The dual function characteristics of an amphoteric surfactant were investigated by determining an isoelectric point, which were attained using zeta potential measurements and quartz crystal microbalance (QCM) experiments. The isoelectric points of DE3-OSA82-AO, DE5-OSA82-AO and DE9-OSA82-AO surfactant systems determined by zeta potential measurements were 6.97, 6.93 and 7.10 respectively and they are in good agreement with the isoelectric point values measured by QCM experiments. The frictional property measured using an automated mildness tester showed that the DE-OSA82-AO surfactant could provide a good softening effect at neutral condition.

• Journal of the Korean Ceramic Society
• /
• v.41 no.4
• /
• pp.302-312
• /
• 2004

This paper presents the experimental results on the properties of the cement mortar with polycarboxylate-type superplasticizers PCA) which were synthesized by different mole ratio of methoxypoly(ethyleneglycol)monomethacrylate (MPEGMAA) and methacrylic acid (MAA) and by different length of polyethyleneoxide (PEO). As the PEO chain was longer and mole ratio of [MPEGMAA]/[MAA] was lower, the fluidity of cement mortar was better. The setting time of mortar with PCA was retarded, and as PEO chain was shorter and [MPEGMAA]/[MAA] was lower, it was more retared. Espeacially, when the molecular weight of MPEGMAA was 475(repeat unit of ethylene oxide=l0), the degree of retardation was the highest of them. The surface tensions of PCA solutions were lower than that of water due to the effect of PEO chain, and also the pore size distribution of cement mortar was influenced by it. The pores in cement mortar with PCA at 28 days were macropores in the range of 7 to 370$\mu\textrm{m}$, and accordingly, the densities and compressive strengths of mortar were lower than those of OPC mortar.

• Polymer(Korea)
• /
• v.34 no.4
• /
• pp.289-293
• /
• 2010

Periodic mesoporous organosilicas (PMO) were synthesized using bis(triethoxy silyl) ethane (BTEE) as the precursor and dodecyl trimethyl ammonium bromide(DTMA), cetyl trimethyl ammonium bromide(CTMA), and octadecyl trimethyl ammonium bromide(ODTMA) as the templating agents. The surface area and pore volume of PMO decrease with the increasing of chain length of templating agents. However, the chain length of templating agents almost has no effect on the pore diameter of PMO. From the XRD and the DSC experiments, we found that the chain length of surfactants using as the templating agents has an effect on the melting transition of polyethylene. But it has no effect on the melting transition of poly(ethylene oxide). The results of TGA prove that the thermal decomposition temperature of polymer which was penetrated into PMO was increased.