• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.20 no.4
• /
• pp.1202-1215
• /
• 1996

In this study, in order to achieve the uniformity of mechanical properties and microstructures of a hot-rolled coil in the transversal direction, the edge mask device is newly device is newly developed and installed at the upper laminar-flow cooling head in the run out table, which controls the transversal temperature of strip with enco panel and bar edge heater. The device that is transversally movable prevents the temperature drop of strip edge by blocking the cooling water into the strip edge. So, the pattern of edge mask set-up condition of the device was derived by analyzing the characteristics of strip temperature and mechanical properties according to the on-line application of edge mask.

• Proceedings of the Korea Multimedia Society Conference
• /
• 2002.05c
• /
• pp.234-239
• /
• 2002

영상 검색의 수행 방법으로 사람의 시각 시스템의 특성을 기반으로 효과적인 특징 추출 통한 계층적인 내용 기반 검색 시스템을 제안한다. 영상 고유의 특징을 얻기 위해 영상내에 존재하는 형태 정보와 질감 방향성 및 칼라 정보를 이용한다. 본 논문에서는 형태 정보의 추출을 위하여 사용자의 질의 영상에서 에지 특징 정보를 추출하고 부분 영역으로 분할된 영상에서 GLCM(Gray Level Co-occurrence Matrix)의 Contrast를 질감 특징으로 추출한다. 이들 두 특징을 이용하여 1차 분류 과정을 거치고 2차 검사에서는 보다 정확한 검색을 수행하기 위하여 1차로 분류된 후보영상들에 대하여 영상의 세부 정보인 칼라 정보를 기반으로 유사도를 측정함으로써 유사한 칼라와 형태를 가지는 영상뿐만 아니라 칼라가 다른 유사한 영상에도 효율적인 검색 성능을 보였다.

• Proceedings of the Korean Institute of Intelligent Systems Conference
• /
• 2006.11a
• /
• pp.15-18
• /
• 2006

본 논문에서는 단수의 IR 센서를 이용한 거리계측시스템보다 빠른 다수 개의 IR 센서를 이용한 거리정보계측시스템 및 환경지도를 구축방법을 제안하였다. 다수 개의 IR 센서를 이용하여 환경정보 또는 환경지도를 구축하기 위해서는 좌표계 간의 일치에 필요한 공정과 필터링 등이 필요하다. 다중 IRS로부터 거리데이터 획득 시, 기구 상의 각도오차 또는 IR 센서간의 방향각의 차이로 인해 실제의 환경과 차이를 가지게 되며, 다수개의 IR 센서를 이용하여 데이터를 획득하기 때문에 각각의 데이터에서 노이즈를 제거하고 필요한 데이터만 추출할 수 있는 공정이 요구된다. 이를 위해 데이터에서 모퉁이 또는 모서리를 추출할 수 있는 에지 검출법을 제안하였다. 마지막으로 본 논문에서는 제안된 거리계측시스템을 이용하여 실제 환경을 측정하였고 에지 검출법을 적용하였다.

• Journal of Korea Multimedia Society
• /
• v.5 no.4
• /
• pp.458-467
• /
• 2002

There has been proposed many simplification algorithms for effectively decreasing large-volumed polygonal surface data. These algorithms apply their own cost function for collapse to one of fundamental simplification unit, such as vertex, edge and triangle, and minimize the simplification error occurred in each simplification steps. Most of cost functions adopted in existing works use the error estimation method based on distance optimization. Unfortunately, it is hard to define the local characteristics of surface data using distance factor alone, which is basically scalar component. Therefore, the algorithms cannot preserve the characteristic features in surface areas with high curvature and, consequently, loss the detailed shape of original mesh in high simplification ratio. In this paper, we consider the vector component, such as surface orientation, as one of factors for cost function. The surface orientation is independent upon scalar component, distance value. This means that we can reconsider whether or not to preserve them as the amount of vector component, although they are elements with low scalar values. In addition, we develop a simplification algorithm based on half-edge collapse manner, which use the proposed cost function as the criterion for removing elements. In half-edge collapse, using one of endpoints in the edge represents a new vertex after collapse operation. The approach is memory efficient and effectively applicable to the rendering system requiring real-time transmission of large-volumed surface data.

• Journal of the Korea Society of Computer and Information
• /
• v.15 no.10
• /
• pp.59-70
• /
• 2010

Each pixels become got pixel value for color of only one from among colors because of bayer pattern that light receiving device of image sensor which is used in HHP and digital camera writes only one color. Information of the missing pixels could infer perfect color image from using information of neighbor pixels by using CFA(Color Filter Array). In this paper, we derive relation between the average of the data from the light receiving device of image sensor and each color channel data. And by using this relation, a new efficient edge color fuzzy method for color interpolation is proposed. Also, missing luminance signal channel interpolation was fuzzy interpolation along any edges direction for reducing color noise and interpolating efficiently it. And in this paper, the proposed method has been proved improving average 2.4dB than the conventional method by using PSNR. Also, resolution of the image of the proposed method was similar to the original image by visual images, we has been verified to be decreased a chromatic aberration than image of conventional algorithms with simulation result.

• Journal of the Korea Society of Computer and Information
• /
• v.16 no.8
• /
• pp.57-66
• /
• 2011

In this paper, it is proposed for algorithm to detect human efficiently using a edge symmetry and gradient directional characteristics in realtime by the feature extraction in a single input image. Proposed algorithm is composed of three stages, preprocessing, region partition of human candidates, verification of candidate regions. Here, preprocessing stage is strong the image regardless of the intensity and brightness of surrounding environment, also detects a contour with characteristics of human as considering the shape features size and the condition of human for characteristic of human. And stage for region partition of human candidates has separated the region with edge symmetry for human and size in the detected contour, also divided 1st candidates region with applying the adaboost algorithm. Finally, the candidate region verification stage makes excellent the performance for the false detection by verifying the candidate region using feature vector of a gradient for divided local area and classifier. The results of the simulations, which is applying the proposed algorithm, the processing speed of the proposed algorithms is improved approximately 1.7 times, also, the FNR(False Negative Rate) is confirmed to be better 3% than the conventional algorithm which is a single structure algorithm.

• Journal of the Institute of Convergence Signal Processing
• /
• v.17 no.2
• /
• pp.71-76
• /
• 2016

Digital image processing is being utilized in various fields including medical industry, satellite photos, and factory automation image recognition. However, this kind of image data produces heat by an external cause in the course of being processed, transmitted, and stored. Most typical noises added in the images are AWGN and salt and pepper. MF, CWMF, and AWMF are methods used to restore images damaged by AWGN and the existing methods are likely to damage detailed information such as an edge. Therefore, this paper suggests an algorithm applying weight of average filter, average filter depending on pixel, and spatial weight filter based on edge size of local mask in an AWGN environment, in a different way. Also, this paper compares functions of existing methods by using PSNR to prove excellence of the suggested algorithm.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.23 no.9
• /
• pp.1146-1151
• /
• 2019

Histogram H is an x-monotone rectilinear polygon with a horizontal edge, called by a base, connecting the leftmost vertical edge and the rightmost vertical edge. Here the rectilinear polygon is a polygon with only horizontal and vertical edges and the x- monotone polygon P is a polygon in which every line orthogonal to the x-axis intersects P at most twice. Walking counterclockwise on the boundary of a histogram H yields a sequence of left turns and right turns at its vertices. Conversely, a given sequence of the turns at the vertices can be realized by a histogram. In this paper, we consider the problem of finding a histogram to realize a given turn sequence. Particularly, we will find the histograms to minimize its area and its bounding box. It will be shown that both of the problems can be solved by linear time algorithms.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.38 no.4
• /
• pp.87-87
• /
• 2001

일반화 대칭 변환 (generalized symmetry transform, GST)은 주어진 영상에서 사전 분할이 없이 국부성과 반사 대칭성을 결합하여 대칭을 측정하고 관심 영역을 추출한다. GST의 거리 가중치 함수에서 국부적인 대칭성이 반영되며 이 함수의 표준 편차 u에 의해 GST의 수행 범위가 조절된다. 넓은 관심영역을 추출하기 위해 반지름 r이 큰 검색영역 내에서의 대칭성이 추출될 필요가 있다. 이에 따라서 GST의 수행시간은 r에 따라 2차적으로 증가하게 된 본 논문에서는 이를 개선하기 위해 선택적 방향 주의를 가지는 수정된 스캔라인 GST를 제안한다. 제안된 GST는 기존의 GST와 유사한 대칭 특성을 추출하지만 선택적 방향의 기울기만을 고려한 스캔라인 위의 에지 화소쌍에서 GST를 수행함으로써 r에 따라서 이의 수행시간이 선형적으로 증가된다 특히 r이 큰 경우에 선택적 방향에 대해서만 적용하면 기존의 GST의 계산량이 비대해지는 단점을 보완해 줄 수 있다. 제안된 GST가 기존의 GST보다 시간적으로 효과적이며 유용하다는 것이 여러 종류의 영상에 대한 실험으로 확인되었다.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.39 no.4
• /
• pp.399-407
• /
• 2002

In this paper, a novel algorithm is proposed to reduce the blocking artifacts of block-based coded images by using block classification and MLP. In the proposed algorithm, we classify the block into four classes based on a characteristic of DCT coefficients. And then, according to the class information of neighborhood block, adaptive neural network filter is performed in horizontal and vertical block boundary. That is, for smooth region, horizontal edge region, vertical edge region, and complex region, we use a different two-layer neural network filter to remove blocking artifacts. Experimental results show that the proposed algorithm gives better results than the conventional algorithms both subjectively and objectively.