• 대한기계학회논문집B
• /
• 제40권5호
• /
• pp.321-327
• /
• 2016

본 연구에서는 고속 회전을 하는 진공청소기용 원심홴의 공력성능 향상을 위해 에어포일 임펠러(Airfoil Impeller)의 적용을 검토 및 연구하였다. 에어포일 최대두께 및 최대두께 위치에 따라 3종의 에어포일 임펠러를 제시하였고, 이때 C4 에어포일 두께분포를 이용하였다. 에어포일 임펠러의 성능 평가는 전산유체역학(Computational Fluid Dynamics) 해석과 흡입일률시험을 통해 수행되었다. 이를 통해 에어포일 형상 적용 시 기존 블레이드 형상에 비하여 임펠러 블레이드 압력면과 디퓨져 블레이드 압력면에서 발생하는 유동박리가 크게 줄어드는 것을 확인하였다. 그리고 이로 인해 기존 원심홴에 비하여 홴 효율이 약 3% 증가 및 비소음이 약 1.3dB(A) 감소되는 것을 확인하였다.

• 한국유체기계학회 논문집
• /
• 제1권1호
• /
• pp.24-31
• /
• 1998

Aerodynamic performance tests and flow measurement were carried out for several radial impellers of NACA 65-810 airfoil. The data base obtained are to be used for verifying the methods of flow analysis and CFD codes. The effects of numbers and span of blades on the performances, efficiency and impeller exit flow are investigated in the present study. The flow rate on the performance curve is proportional to the span of the blade for the same value of fan pressure rise. The magnitude of radial velocity component at the impeller exit gradually decreases from the hub to shroud side. The magnitude of tangential velocity component gradually increases from the hub to shroud side. The way of variations of velocity is the same at the diffuser exit, however, becomes more uniform. The pressure rise performance increases with blade number at the small flow coefficients, however, decreases with the number of blade at the large flow coefficients. This shows that flow guidance in important at the low flow rate and the friction becomes significant at the high flow rate.

• 대한기계학회논문집B
• /
• 제23권8호
• /
• pp.957-968
• /
• 1999

Performance tests of an airfoil fan and measurement of flow fields at the impeller exit are carried out to investigate the effects of the tip clearance between the rotor and inlet casing on the impeller performance. The impeller is twelve bladed of NACA 65-810 airfoils and tested with 3 different size of gap; 1, 2, 4mm. The relative decrease of pressure rising performance of the fan is 15 percent for the design flow rate when the gap size is 1 percent of the impeller diameter. The reduction of performance becomes large as the flow rate increases. The leakage flow through the clearance affects the through flow of the impeller, which results in decrease of the slip factor as well as the impeller efficiency. The data base obtained in the present study can be used for the design and flow analysis of the airfoil fans.