• Proceedings of the Materials Research Society of Korea Conference
• /
• 2009.11a
• /
• pp.13.1-13.1
• /
• 2009

에어로젤은 인류가 개발한 소재 중에서 가장 가벼운 고체로, 기공률이 90%이상이고 비표면적은 ~1000m2/g, 기공의 크기는 10nm 크기로 이루어진 나노기공 물질이다. 1931년에 Kisley가 물유리로부터 실리카 에어로젤을 합성한 이래로 실리카 에어로젤에 대한 연구가 가장 많이 이루어져왔으며, 단열소재, 흡음재, 체렌코프우주선 디텍터, 반도체의 초저유전소재, 유출된 석유의 정제, 촉매 등에 대한 응용에 대해서도 연구가 많이 이루어져 왔다. 그리고TiO2와 같은 광촉매 에어로젤 소재, 카본 에어로젤 소재등 다양한 나노기공 소재에 대해서도 연구가 이루어지고 있으며, 카본 에어로젤의 경우 나노기공과 비표면적을이용한 전기이중층 커패시터 (EDLC)에 대한 연구도 이루어지고 이다. 본 연구에서는 첫째로, 실리카 에어로젤에 대한 연구결과를 소개하고 이의 단열소재로서의 응용가능성에대하여 언급하고자 한다. 실리카 에어로젤 나노기공 소재의 경우, 기공크기가 10nm크기로 매우 작고 공기의 자유이동길이와 거의 비슷하여서 대류에 의한 열전달을 낮출 수 있으며, 낮은 고체함량으로 인하여 포논에 의한 열전달을 낮출 수 있기 때문에 단열소재로서 최고의 성능을 나타낸다. 하지만, 문제는 높은 기공률로 인한 기계적인 취약성이 문제이다. 따라서 이를 보완하기 위항 섬유로 에어로젤을 보강할 수 있는데, 이를통하여 에어로젤 나노기공소재와 섬유보강에 의한 복합화에 대하여 말하고자 한다. 또 다른 하나의 연구방법은유기-무기 하이브리드 나노기공 소재를 합성하는 것이다. 여기서는하나의 방법으로 MTEOS-TEOS의 하이브리드화와 초임계 건조공정에 의한 나노기공 소재에 대한 연구결과를소개하고자 한다. 마지막으로 카본 에어로젤 나노기공소재의 합성과 나노기공 구조의 제어 및 물성평가에 대한 것을 말하고자하는데, 본 발표에서는 레소시놀과 포름알데히드를 촉매에 의한 중합반응을 통하여 유기 에어로젤 소재를 합성하고 분위기에서탄소화 공정을 통하여 카본에어로젤을 합성하였다. 또한 금속 니켈을 도입하는 것에 의하여 탄소/니켈 복합 하이브리드 에어로젤 소재를 합성하고 슈퍼커패시터 전기화학 특성에 대한 연구결과를 발표하고자 한다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.10
• /
• pp.6816-6822
• /
• 2015

In this study, silica aerogel-glass wool composites were developed for improvement of thermal conductivity and overcoming the water adsorption of glass wool boards. Silica aerogel-glass wool composites were prepared by glass wool and silica aerogel with liquid binder. Mixtures with binder were composed of CMC (carboxymethyl cellulose) and silica aerogel for glass wool board. Silica aerogel-glass wool composite boards were had $0.065g/cm^3$ density by impregnation silica aerogel where from origin glass wool board at $0.048g/cm^3$ density. Thermal conductivity of silica aerogel-glass wool composites were 0.0315 W/mK (up to 7.4% thermal resistance) and fire penetration time came to 362 seconds (up to 2.7 times stronger than origin glass wool board). In addition, hydrophobic aerogel characteristics prevented the adsorption of water onto silica aerogel-glass wool composite boards that was good for lightweight.

• Clean Technology
• /
• v.29 no.4
• /
• pp.237-243
• /
• 2023

Aerogel is the most excellent insulation material known to date, but it is inflexible and has very low strength. A blanket containing aerogel in a nonwoven fabric or fiber is currently the most practical form. However, aerogel blankets are not yet widely used because they cannot avoid dust generation when handled, lack flexibility, and can possibly deform. In this study, vacuum treatment, surface treatment, and composite materialization technology were applied to solve this problem, and some prototypes were also made. If an aerogel blanket is wrapped in an aluminum sheet, sealed at the four ends, and vacuumed, it can become a material with better insulation than the blanket itself. An aerogel molded body can be made by coating the aerogel blanket with resin and treating the surface. If the aerogel blanket is multi-packed and laminated with resin or fiber in multiple layers to make it a composite material, it can be used as a flexible insulation material. In particular, this composite material, which utilizes a Teflon membrane with controlled pores, is breathable and waterproof, so it can be used for clothing. Prototypes of insoles for winter boots and outdoor roll mats were also produced using aerogel blanket resin and fiber composites. These prototypes showed low thermal conductivity of less than 20 mW m^-1K^-1, with good flexibility and durability.

• Clean Technology
• /
• v.28 no.4
• /
• pp.301-308
• /
• 2022

Since nanoporous silica aerogel was first synthesized in 1931, its potential as an ultra-lightweight superinsulation material has been steadily attracting attention. Silica aerogel is the best thermal insulation material to date. However, the potential applications of this lightweight material have so far been hindered by its inherent fragibility and brittleness arising from its ultra-porous nature. Although the monolithic form of silica aerogel has the best ultra-lightweight superinsulation properties, it cannot be used in this form. Instead it is used in the form of powders, particles, and blankets. However, these forms still have shortcomings. Silica aerogel is most widely applied in the form of a fiber-reinforced aerogel blanket, but this form is likely to generate dust when handled. Although silica aerogel particles have been proven to be non-toxic to humans, dust formation remains a major barrier to the widespread application of silica aerogel blankets. This paper will investigate the unique properties of silica aerogel and determine what fields it can be used in or potentially be used in due to its unique properties. In addition, we will review the important advances in silica aerogel synthesis technology and its commercialization so far, and then consider the problems that exist for its widespread commercialization in the future and how to overcome them.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2006.05a
• /
• pp.34.1-34.1
• /
• 2006

• Fire Science and Engineering
• /
• v.32 no.1
• /
• pp.81-88
• /
• 2018

Air and ultra lightweight aerogels were used to lighten the weight of the firefighters' protective clothing. In order to lighten the firefighters' protective clothing composed of 3 layers (outer shell, mid-layer, lining), it was most effective to replace the lining which occupied the largest weight in the total weight with the new materials. Thermal protective performance tests were carried out on flame (ASTM D 4108), radiant heat (KS K ISO 6942) and mixing heat (KS K ISO 17492) of flame and radiation. When the lining felt was replaced with an air layer, the air layer must be at least 3 mm to meet the KFI and ISO standards for the thermal protective performance. However, even if the thickness of the air layer increased to 10 mm, the thermal protective performance was lower than that of the existing products. When the felt was replaced with aerogels, the TPP rating (ASTM D 4108) satisfied the KFI standard at the 2 mm thickness of the aerogels. When the thickness of the aerogels was 3 mm, the TPP rating was improved about 140% compared to the existing products. It was confirmed that not only weight reduction but also thermal protective performance was improved by use of aerogels. However, due to the fragile nature of aerogels, a method of fixing them to a constant thickness between layers constituting a firefighters' protective clothing should be considered in the future.

• Ceramist
• /
• v.14 no.3
• /
• pp.17-22
• /
• 2011

• Clean Technology
• /
• v.18 no.1
• /
• pp.14-21
• /
• 2012

The pros and cons of green building thermal insulation materials and systems have been reviewed from traditional thermal insulation materials such as mineral wool and polyurethane to new thermal insulation materials like VIP and aerogel and future insulating VIM and DIM. VIPs and aerogels with very low thermal conductivity can use for green buildings to significantly increase residential area by reducing energy consumption. Aerogels can be produced as not only opaque and but also translucent forms, thus enabling a wide range of possible building application. For building applications, there are many properties to consider like building site adaptability and mechanical strength, fire protection, cost and environmental impact.

• The Magazine for Energy Service Companies
• /
• s.86
• /
• pp.60-67
• /
• 2014

• Ceramist
• /
• v.10 no.1
• /
• pp.28-40
• /
• 2007