• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.19 no.2
• /
• pp.414-421
• /
• 2015

This paper presents a new method to decompose a duplicated ECG signal, which is measured from two people, to two individual ECG signals. In paper, it is shown that the duplicated ECG signal can be decomposed, provided that their SAECG signals are known. As the SAECG signal is the average of a ECG signal, it is a feature to identify individual ECG signals from the duplicated signal. Since the ECG signal is nearly periodic, so-called heart-rate, the period of each ECG signal can be found by using the autocorrelation of the duplicated signal, That is, the autocorrelation has high peaks at the multiple instants of heart-rate of each person. With the heart-rate of each person obtained by some processing, all R-peaks are identified by the SAECG signals. To be concrete, the SAECG signal of each person is repeatedly placed at the R-peak instants with his heart-rate, and the weight of each SAECG signal is computed by LMSE optimization. Finally, as adding the error signal in the LMSE optimization processing to the weighted SAECG signal, each individual ECG signal is obtained. In experimental results, we demonstrate that the duplicated ECG signal is successfully decomposed into two ECG signals.

• Journal of Korea Multimedia Society
• /
• v.12 no.4
• /
• pp.473-482
• /
• 2009

Reconstructed 3D data from computer vision includes necessarily a noise or an error. When these data goes through a mesh process, the different 3D mesh data from original shape comes to make by a noise or an error. This paper proposed the method that smooths a noise effectively by noise analysis in reconstructed 3D data. Because the proposed method is smooths a noise using the area ratio of the mesh, the pre-processing of unusable mesh is necessary in 3D mesh data. This study detects a peak noise and Gaussian noise using the ratio of 3D volume and 2D area of mesh and smooths the noise with respect of its characteristics. The experimental results using synthetic and real data demonstrated the efficacy and performance of proposed algorithm.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.38 no.2
• /
• pp.195-199
• /
• 2010

(255,223) RS(Reed-Solomon) code which is the CCSDS(Consultative Committee for Space Data Systems) standard was used in the STSAT-3 to correct errors during the downlink of payload data. The RS encoder developed by VHDL was implemented in MMU(Mass Memory Unit). Moreover, the RS decoder developed by C-language was implemented in the DRS(Data Receiving System) of ground station. In this paper, we reported the design and analysis results of RS(255,223) for STSAT-3. The BER(Bit Error Rate) performance from MMU to DRS was confirmed through the downlink test at 16 Mbps. Also, the error correction performance and capability of RS(255,223) was tested by the manual attenuation of the RF(Radio Frequency) signal in the X-band transmitter resulting in putting some errors in the communication line.

• Journal of KIISE:Information Networking
• /
• v.30 no.6
• /
• pp.695-704
• /
• 2003

A wavelet-based video stream is more susceptible to the network transmission errors than DCT-based video. This is because bit-errors in a subband of a video frame affect not only the other subbands within the current frame but also the subsequent frames. In this paper, we propose a video source coding scheme called IPC(Intra Prediction Coding) scheme in order to reduce the error propagation to the subsequent frames. In the proposed scheme, a subband except LL subband in the current frame refers to the lower-level subband within the same frame. This reduces the error propagation to subsequent frames. We evaluated the performance of our proposed scheme in the simulated wireless network environment. As a result of tests, it was shown that the proposed algorithm shows better performance than MRME in a heavy motion image sequence while IPC outperforms MRME at a high bit-rate in small motion image sequence.

• Journal of Satellite, Information and Communications
• /
• v.10 no.2
• /
• pp.46-53
• /
• 2015

Visible Light Communication (VLC) is effective way to realize the light device and communication device using a Light Emitting Diode (LED) simultaneously. VLC has high security for Field Of View (FOV) communication area, also which is possible to transmit the high data rate using visible light. In VLC, transmitting the divided data by the RGB channels is higher data rate than transmitting the same data by RGB channels. However, it occurred the burst error by scattering and reflection of visible light which is impossible to restore that. To solve the problem, we proposed the 2-step interleaving scheme that high data rate and improve the performance of BER in VLC. The proposed system implements cyclic interleaving and convolutional interleaving that is able to be standardized the performance of RGB channels and improve the performance of BER using error correction.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.33 no.4C
• /
• pp.312-320
• /
• 2008

The macroblock-based adaptive interpolation filter method has been considered to be able to achieve high coding efficiency in H.264/AVC. In this method, although the filter selection criterion considered in terms of rate and distortion have showed a good performance, it still leaves room for improvement. To improve high coding efficiency better than conventional method, we propose a new filter selection criterion which considers two bit rates, motion vector and prediction error, and reconstruction error. In addition, the algorithm for reducing the overhead of transmitting the selected filter information is presented. Experimental results show that the proposed method significantly improves the coding efficiency compared to ones using conventional criterion. It leads to about a 5.19% (1 reference frame) and 5.14% (5 reference frames) bit rate savings on average compared to H.264/AVC, respectively.

• Journal of Digital Convergence
• /
• v.10 no.8
• /
• pp.173-178
• /
• 2012

In the generated model for the recognition vocabulary, tri-phones which is not make preparations are produced. Therefore this model does not generate an initial estimate of parameter words, and the system can not configure the model appear as disadvantages. As a result, the sophistication of the Gaussian model is fall will degrade recognition. In this system, we propose the error correction system using out-of vocabulary rejection algorithm. When the systems are creating a vocabulary recognition model, recognition rates are improved to refuse the vocabulary which is not registered. In addition, this system is seized the lexical analysis and meaning using probability distributions, and this system deactivates the string before phoneme change was applied. System analysis determine the rate of error correction using phoneme similarity rate and reliability, system performance comparison as a result of error correction rate improve represent 2.8% by method using error patterns, fault patterns, meaning patterns.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.20 no.1
• /
• pp.113-120
• /
• 2020

The multi-view video is a collection of multiple videos capturing the same scene at different viewpoints. Thus, there is an advantage of providing for user oriented view pointed video. This paper is suggested that the compression performance of layered depth image structure expression has improved by using more improved method. We confirm the data size of layer depth image by encoding H.264 technology and the each performances of reconstructed images. The H.264/AVC technology has easily extended for H.264 technology of video contents. In this paper, we suggested that layered depth structure can be applied for an efficient new image contents. We show that the huge data size of multi-view video image is decreased, and the higher performance of image is provided, and there is an advantage of for stressing error restoring.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.24 no.6A
• /
• pp.920-930
• /
• 1999

Many researches on the multi-level QAM(Quadrature Amplitude Modulation) which is known to be a promising digital data transmission method for efficient use of channel bandwidth have been carried on, and their applications to various real fields are now being in progress. However, in the band-limited communication systems, each transmitted symbols is distorted by the ISI(Intersymbol Interference) and the phase error. Therefore, an equalizer and a carrier recovery must be taken into considerations to attenuate the effects of these distortions in the receiver. This paper presents an effective receiver structures that is applicable to the multi-level QAM. The proposed receiver system is consisted of an equalizer with Godard’s blind algorithm and a carrier recovery circuit. The phase error is estimated with a $\theta$-matching algorithm and is used in the carrier recovery to recover the correct phase. The simulation results are included to evaluate performance of the proposed receiver system for the various channel models.

• 전자공학회논문지 IE
• /
• v.43 no.2
• /
• pp.54-62
• /
• 2006

In this paper, a new stereo object tracking system using the disparity motion vector is proposed. In the proposed method, the time-sequential disparity motion vector can be estimated from the disparity vectors which are extracted from the sequence of the stereo input image pair and then using these disparity motion vectors, the area where the target object is located and its location coordinate are detected from the input stereo image. Basing on this location data of the target object, the pan/tilt embedded in the stereo camera system can be controlled and as a result, stereo tracking of the target object can be possible. From some experiments with the 2 frames of the stereo image pairs having $256\times256$ pixels, it is shown that the proposed stereo tracking system can adaptively track the target object with a low error ratio of about 3.05 % on average between the detected and actual location coordinates of the target object.