• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.02a
• /
• pp.613-613
• /
• 2013

그래핀은 저차원계 구조에서 기인하는 뛰어난 전기적, 물리적, 기계적 성질을 지니고 있어 실리콘 기반 기술을 대체할 전계 효과 트랜지스터 이외에도 투명전극, 초고용량 커패시터, 전계방출 디스플레이 등 다양한 응용분야에 적용 가능하다. 최근에는 이러한 응용 연구분야에서 그래핀과 탄소나노튜브 각각의 단점을 최소화하고 장점을 극대화하기 위한 그래핀-탄소나노튜브 혼성 나노구조에 대한 연구들이 진행되고 있는 추세이다. 이전 연구들에서 환원된 그래핀 산화물(Reduced Graphene Oxide, RGO)을 이용한 그래핀-탄소나노튜브 혼성 나노구조가 제작되었는데, 이는 RGO의 제작과정에서 복잡한 공정과 긴 합성과정이 요구될 뿐 아니라, 복합 물질에서 탄소나노튜브의 밀도 제어가 어렵다는 단점을 지닌다. 또한 현재까지 제작된 그래핀-탄소나노튜브 혼성 나노구조의 경우, 열 화학기상증착법으로 합성된 다층(few-layers)의 그래핀과 탄소나노튜브 혼성 나노구조를 제작하였다 [1-6]. 본 연구에서는 우수한 전기적 특성을 가진 단층(monolayer)의 그래핀을 열 화학기상증착법으로 합성한 후, 그래핀 위에 단일벽 탄소나노튜브를 성장시킴으로써 그래핀-탄소나노튜브 혼성 나노구조를 제작하였다. 합성된 그래핀-탄소나노튜브의 구조적 특징은 주사 전자 현미경과 라만 분광기 측정을 통해 확인하였고, 촉매의 표면 형상 및 화학적 상태는 원자힘 현미경과 X선 광전자 분광법을 통해 확인하였다. 또한 그래핀 기반의 전계 효과 트랜지스터의 경우, 상온에서 그래핀은 우수한 전하 이동도를 가지며 웨이퍼 스케일에서 제작하기 쉬우나 밴드 갭이 없으므로 높은 Ion/Ioff를 가지는 그래핀 기반의 트랜지스터를 만드는 것이 과제이다. 반면 탄소나노튜브는 큰 에너지 갭을 가지고 있으므로 높은 Ion/Ioff를 구현하는 소자 제작이 가능하다. 그리하여 제작된 그래핀-탄소나노튜브 혼성 나노구조의 소자 제작을 통해 전기적 특성을 조사하였다.

• Journal of Korean Society of Environmental Engineers
• /
• v.34 no.5
• /
• pp.312-315
• /
• 2012

In this study, the model which can predict the quality of effluent has been implemented through multiple regression analysis to use operation data of a sewage treatment plant, to which a media process is applied. Multiple regression analysis were carried out by cases according to variable selection method, removal of outliers and log transformation of variables, with using data of one year of 2011. By reviewing the results of predictable models, the accuracy of prediction for $COD_{Mn}$ of treated water of secondary clarifiers was over 0.87 and for T-N was over 0.81. Using this model, it is expected to set the range of operating conditions that do not exceed the standards of effluent quality. In conclusion, the proper guidance on the effluent quality and energy costs within the operating range is expected to be provided to operators.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.20 no.1
• /
• pp.72-84
• /
• 2016

The conventional brace system is generally accepted as the lateral load resisting system for steel structures due to efficient story drift control and economic feasibility. But lateral stiffness of the structure decreases when buckling happens to the brace in compression, so that it results in unstable structure with unstable hysteresis behavior through strength deterioration. Buckling restrained brace(BRB) system, in which steel core is confined by mortar/concrete-filled tube, represents stable behavior in the post-yield range because the core's buckling is restrained. So, seismic performance of BRB is much better than that of conventional brace system in point of energy absorption capacity, and it is applied the most in high seismicity regions as damper element. BRBs with various shaped-sections have been developed across the globe, but the shapes experimented in Korea are now quite limited. In this study, we considered built-up type of restraining member made up of precast reinforcement concrete and the steel core. we experimented the BRB according to AISC(2005) and evaluated seismic performances and hysteresis characteristics.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.44 no.4 s.316
• /
• pp.36-44
• /
• 2007

In this paper, we implement the speech & face recognition system to support various ubiquitous sensor network application services such as switch control, authentication, etc. using wireless audio and image interface. The proposed system is consist of the H/W with audio and image sensor and S/W such as speech recognition algorithm using psychoacoustic model, face recognition algorithm using PCA (Principal Components Analysis) and LDPC (Low Density Parity Check). The proposed speech and face recognition systems are inserted in a HOST PC to use the sensor energy effectively. And improve the accuracy of speech and face recognition, we implement a FEC (Forward Error Correction) system Also, we optimized the simulation coefficient and test environment to effectively remove the wireless channel noises and correcting wireless channel errors. As a result, when the distance that between audio sensor and the source of voice is less then 1.5m FAR and FRR are 0.126% and 7.5% respectively. The face recognition algorithm step is limited 2 times, GAR and FAR are 98.5% and 0.036%.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.9 no.6
• /
• pp.727-731
• /
• 2014

Nowadays, most people have been using a bicycle as a transportation or exercise. The bicycle is so indispensable to the public means of transportation. The demand of the bicycle is increasing since one is becoming advancement more and more. We propose a smart bicycle that can controls the individual parts of the bicycle by smart phone. This paper verifies and validates the problem and the advanced direction after confirming the smart phone's public bicycle to learn about market trends and the analysis of future prospects. Based on the analyzed contents of the problem and improving the direction, we implement public bicycle system with smart bicycle. The implementation of the proposed method shows the available and the effective system with the promote public health by cycling and contributing to the domestic bicycle industry.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.63 no.4
• /
• pp.254-259
• /
• 2014

In this paper, we describe construction of a wind stabilization demo-site and effects of output power control of wind turbines for suppression of ramp rate using ESS (Energy Storage System). It is difficult to control the output power of distributed generator such as wind turbine which of variation is very large. If the large capacity wind farm be interconnected into power system may cause blackout due to Power Quality. For these reasons, the international standards such as Grid-Code is limited to less than 10 [%/min] of renewable energy ramp rate. The case of Korea, government actively conducts propagating large-scale renewable energy for green growth policy, to interconnecting more renewable energy into power system is necessary for stabilization technology. For these reasons, the POSCO consortium has constructed a wind stabilization demo-site that is configured as 500 [kWh] battery energy storage systems can output up to 3 [C-Rate] and two wind turbines rated 750 [kW]. In POSCO consortium, which implements various methods stabilizing output power of wind turbine such as smoothing, section firming and ramp control, we derive the results of long-term demonstration that can be controlled to satisfy to the international standard about ramp rate [%/kW] of wind turbine output power.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.40 no.10
• /
• pp.2090-2101
• /
• 2015

We propose a robust tracking method that combines the merits of ACM(active contour model) and the color-based PF(particle filter), effectively. In the proposed method, PF and ACM track the color distribution and the contour of the target, respectively, and Decision part merges the estimate results from the two trackers to determine the position and scale of the target and to update the target model. By controlling the internal energy of ACM based on the estimate of the position and scale from PF tracker, we can prevent the snake pointers from falsely converging to the background clutters. We appled the proposed method to track the head of person in video and have conducted computer experiments to analyze the errors of the estimated position and scale.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.35 no.9B
• /
• pp.1390-1398
• /
• 2010

We present the concept of applying Wireless Mesh Networking (WMN) technology into Smart Grid, which is recently rising as a potential technology in various areas thanks to its advantages such as low installation costs, high scalability, and high flexibility. Smart Grid is an intelligent, next-generation electrical power network that can maximize energy efficiency by monitoring utility information in real-time and controlling the flow of electricity with IT communications technology converged to the existing power grid. WMNs must be designed for Smart Grid communication systems considering not only the high level of reliability, QoS support and mass-data treatment but also the properties of the traditional power grid. In addition, it is essential to design techniques based on international standards to support interoperability and scalability. In this paper, we evaluate the performance of IEEE 802.11s based Smart Grid Mesh Networks by conducting preliminary simulation studies with the ns-3 simulator. We also outline some challenging issues that should be reviewed when considering WMNs as the candidate for Smart Grid communication infrastructure.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2010.11a
• /
• pp.833-837
• /
• 2010

This study aims at finding an optimal exhaust diffuser design of a high altitude testing chamber for a low bypass turbofan engine (F404-402) with thrust pound force of 17,700 and air mass flow rate of 66kg/s ejecting at a speed of Mach 1.66. The final proposed ejector size has better pressure recovery characteristics and targets to reduce operational cost at engine performance testing. Conventional high altitude test chamber layout was adopted and first drawn in two dimensions using Autocad software so as to determine the gas path, the ejector frontal size was then determined from gas dynamics equations considering traditional gas ejection method where both the engine exhaust and cell cooling air are exhausted via the ejector. Modification to a smaller ejector with an alternative secondary cell cooling exhaust port was then performed and modelled in 3D using Solid Works software.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.30 no.3 s.47
• /
• pp.361-367
• /
• 2004

In this study, a different UV (ultra-violet) ray absorption system is presented in which butyl methoxydiben-zoylmethane (BMDM, a model UV-A absorbent, 320$\~$400 nm) is stabilized in phase-controlled poly(methyl methacrylate) (PMMA) microspheres. The photochemistry of BMDM in the microspheres was investigated considering its phase characteristics therein. The analysis of a differential scanning calorimeter and X-ray diffractometer showed that the BMDM in the microspheres was present with a non-crystalline state. The phase control of BMDM in the polymer microsphere has an excellent ability to protect UV-A with maintaining its photo- and thermal stability. The results obtained in this study illustrate well that the phase control of the UV absorbents in the polymer microspheres is another key factor that de-termines its photochemistry and photostability in the final formulations.