• Journal of Ocean Engineering and Technology
• /
• v.33 no.5
• /
• pp.387-393
• /
• 2019

In this study, the free motion of a riser due to vortex shedding was numerically simulated with Large Eddy Simulation (LES) and Detached Eddy Simulation (DES) turbulence models. A numerical simulation program was developed by applying the Rhie-Chow interpolation method to the pressure correction of the OpenFOAM standard solver pimpleDyMFoam. To verify the developed program, the vortex shedding around the fixed riser at Re = 3900 was calculated, and the results were compared with the existing experimental and numerical data. Moreover, the vortex-induced vibration of a riser supported by a linear spring was numerically simulated while varying the spring constant. The results are compared with published direct numerical simulation (DNS) results. The present calculation results show that the numerical method is appropriate for simulating the vortex-induced motion of a riser, including lock-in phenomena.

• Journal of the Architectural Institute of Korea Structure & Construction
• /
• v.34 no.3
• /
• pp.103-111
• /
• 2018

A prototypical building that represents the energy characteristics of buildings can be used as a mean of improving building energy efficiency by supporting policy makers, researchers, architects and engineers. This paper is a fundamental study for the definition of prototypical office building models of Korea. First of all, the term "prototypical buildings" was defined in the context of the representatives of building stock by examining the meanings used from many previous researches. Then, building energy related DB of Korea that is available from public and governmental organization such as MLIT (Ministry of Land, Infrastructure and Transport) and KEEI (Korea Energy Economics Institute) is analyzed in terms of materials for prototypical building definition. Finally, numerous prototypical building studies since 1990's from all of the world were classified with three criteria based on the degrees of the used DB and assumptions in defining prototypical building. The found three criteria are EDPB (Empirical Decision based Prototypical Building), HIPB (Hybrid Information based Prototypical Building) SAPB (Statistical Analysis based Prototypical Building).

• Journal of Hydrogen and New Energy
• /
• v.33 no.5
• /
• pp.525-533
• /
• 2022

In this study, in order to numerically analyze the heat flow characteristics in the valve according to the opening rate for the solenoid valve for hydrogen supply applied to the hydrogen storage tank, flow characteristics were comparatively analyzed. Through the analysis of pressure and temperature distributions within the valve according to the high-pressure supply condition of 70 MPa or more, the heat flow characteristics in the valve, inlet and outlet passage according to the opening rate of the valve were identified. As a result a sudden change in the fluid behavior appears in the neck region of the valve, and it is understood that the flow separation caused by the flow path shape of the expanded tube has a dominant influence on the flow characteristics. And, it was confirmed that the shape of the valve seat is a factor significantly affecting the improvement of flow rate and differential pressure performance.

• Journal of Hydrogen and New Energy
• /
• v.33 no.6
• /
• pp.749-760
• /
• 2022

An efficient computational fluid dynamics model was proposed for simulating microchannel-type steam/methane reformers with thin washcoat catalyst layers. In this model, by using the effectiveness factor correlations, the overall reaction rate that occurs in the washcoat catalyst layer could be accurately estimated without performing the detailed calculation of heat transfer, mass transfer, and reforming reactions therein. The accuracy of the proposed model was validated by solving a microchannel-type reformer, once by fully considering the complex steam/methane reforming (SMR) process inside the washcoat layer and again by simplifying the SMR calculation using the effectiveness factor correlations. Finally, parametric studies were conducted to investigate the effects of operating conditions on the SMR performance.

• Annual Conference of KIPS
• /
• 2011.04a
• /
• pp.1074-1077
• /
• 2011

국내외 대규모 산업시설은 유해물질과 직 간접적으로 밀접하게 관련되어 유해물질 누출사고는 막대한 물적, 인적 피해를 발생시키며 누출물질, 저장시설, 대기 상태에 따라 유해물질 확산 속도 및 범위가 다르기 때문에 이를 예측하는 대기확산 시스템이 필요하다. 또한 기존의 대기확산 시스템은 산업시설 구조물 설계 단계에서 안전성을 확인하는 시뮬레이션용으로 사용되었기 때문에 누출사고 발생 시 즉각적인 처리와 대응이 어려우며 전문적 지식수준의 사용자 입력을 요구한다. 본 논문은 에너지 플랜트 환경의 특수성과 효율성을 고려하여 운영 중인 시설에 적용 가능한 대기확산 시스템 연구를 목적으로 한다. 이를 위하여 신속하고 효율적인 대기확산 모델을 선정 정의하고 융통성 있는 대기확산 시스템의 구성요소를 컴포넌트화하여 구현하였으며 사고 발생 시 빠르게 피해범위를 예측할 수 있는 실시간 대기확산 시스템 설계 방안을 제시하였다.

• Journal of Wind Energy
• /
• v.15 no.2
• /
• pp.37-44
• /
• 2024

In this study, a tensile test and FE analysis were conducted on a bolt-connected L-shaped flange to evaluate its behavior and load resistance. A total of five specimens were manufactured using the inner and outer distances and bolt diameters of the L-type flange as experimental variables. As a result of the tensile test of the L-shaped flange, as the internal and external length ratio (b/a) increased, the maximum load decreased and the maximum displacement increased. As the diameter (d) of the bolt increased, the maximum load and the deformation of the wall increased. The shapes of the destruction specimens showed two forms of destruction: one due to the fall of the nut and the surrender of the bolt as the thread of the bolt and nut was worn out, followed by the surrender of the wall. As a result of FE analysis, it was found that elasto-plastic model (EPM) analysis similarly tracks the behavior of the tensile test results.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2009.06a
• /
• pp.48-48
• /
• 2009

최근 나노광전소자 응용에 큰 관심을 받는 물질인 산화물 나노선은 앞으로 불어 올 나노소재 시대를 여는 선두 물질이다. 이러한 산화물 나노선 가운데 가장 큰 관심을 받는 물질로는 산화아연 나노선을 들 수 있다. 삼화아연 나노선은 상온에서 큰 엑시톤 결합에너지 및 큰 밴드갭을 가지고 있으며 투명성 및 소자구동시 안정성을 지니고 있어 그 응용이 기대된다. 하지만 이러한 나노선을 이용한 광전소자 응용은 bottom-up 방식을 기초로 한 대면적 소자제작이 어렵다. 이러한 bottom-up 방식의 나노소자 제작에서 필요한 나노선 성장기술은 금속 catalyst 없이 대면적 성장, 나노선 수직어레이, 나노선의 고온성장, 기판 사이에 발생하는 자발적 계면층 제거 등으로 대표된다. 또한 나노선의 결정성 및 광특성 향상을 위해서는 고온성장이 불가피한데, 실리콘 기판과 같이 격자상수 불일치도가 큰 기판에서는 나노선 성장이 이루어지지 않고 다시 탈착되어 구조물이 성장되지 않는다. 본 연구에서는 선택적 삼원계 단결정 씨앗층을 이용하여 길이/직경 비가 매우 향상된 MgZnO 나노와이어를 interfacial layer 없이 수직으로 고온에서 성장하여 산화물 전계방출 에미터로서의 가능성을 확인하였다.

• Journal of the Korean Vacuum Society
• /
• v.10 no.3
• /
• pp.298-302
• /
• 2001

Cleaning effect of RF/DC discharge to clean the surface of vacuum chamber was studied for various discharge conditions. Glow discharge cleaning without baking reduced the outgassing rate to 1/2, which was similar to that after the only baking treatment alone. Glow discharge cleaning treatment with baking improved the cleaning efficiency and then the outgassing rate was remarkably reduced to 1/20. It was found that the ion energy and the ion density were important factors in cleaning the surface. RF discharge cleaning was more effective than BC discharge cleaning.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.12 no.2
• /
• pp.63-67
• /
• 2002

Langasite single crystal was grown by Xenon-arc floating zone method in mixutre of Af and $O_2$ gas atmosphere. Growing and rotation speed were 1.5 much and 15 rPm respectively. The grown crystal had a c-axis and color of orange. Composition of the grown crystal was $La_{3.10}Ga_{4.73}Si_{1.17}O_{14}$. Activation energy of the crystal was 0.23 eV and was PTC characteristics.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.7 no.4
• /
• pp.521-527
• /
• 1997

Ruby single crystals of 6-7 mm in dialneter and 20-25 mm in length were grown by the xenon-arc type floating zone method using a self-designed FZHY1, Calcination and sintering conditions were investigated and optimum growth conditions were established for controlling the factors such as growth rates, rotation speeds and cooling rates. Also the available energy levels of $Cr^{3+}$ were calculated from transmission data. The growth direction of the crystals was [1010] direction identified by Laue back reflection pattern. The distribution of refractive indices on the wafer of the grown crystals was homogeneous except for the edges of the wafer. The crystals could be used as a laser material with a wavelength of 693 nm and a metastate level.