• Tunnel and Underground Space
• /
• v.33 no.6
• /
• pp.574-593
• /
• 2023

In this study, the effectiveness and applicability of a newly designed Compact CNS shear box for conducting direct shear tests on jointed rock specimens were investigated. CNS joint shear tests were conducted on jointed rocks with Artificially generated roughness while varying the fracture surface roughness coefficient and initial normal stress conditions. In addition, displacement data were validated by Digital image correlation analysis, fracture patterns were observed, and comparative analysis was conducted with previously studied shear behavior prediction models. Furthermore, the accuracy of the displacement data was confirmed through DIC analysis, the fracture patterns were observed, and the shear properties obtained from the tests were compared with existing models that predict shear behavior. The findings exhibited a strong correlation with specific established empirical models for predicting shear behavior. Furthermore, the potential linkage between the characteristics of shear behavior and fracture patterns was deliberated. In conclusion, the CNS shear box was shown to be applicable and effective in providing data on the shear characteristics of the joint.

• Tunnel and Underground Space
• /
• v.34 no.1
• /
• pp.15-27
• /
• 2024

In this case study, detailed survey of the Excavation Damaged Zone (EDZ) evaluation for the deep geological repository for high level nuclear waste was conducted. Oversea and Domestic case studies were compiled and investigated. EDZ is considered a crucial factor in the performance assessment of spent fuel disposal, leading to numerous studies worldwide aiming to understand the characteristics of the EDZ and quantitatively assessment of its extent through field and laboratory tests at Underground Research Laboratory (URL) sites. To enhance the understanding of EDZ, this study begins with defining and exploring the history of EDZ, compiling factors influencing EDZ, and summarizing the impacts caused by EDZ. Subsequently, an analysis of EDZ and rock properties is performed, followed by presenting generalized outcomes, limitations drawn from previous research, and proposing future research directions.

• Tunnel and Underground Space
• /
• v.19 no.1
• /
• pp.11-18
• /
• 2009

Use of nuclear energy inevitably brings the problem of radioactive waste disposal. Repositories for disposing radioactive waste use underground space that is unconnected with the outside and the diagonal system, which allows the waste to be deposited. Ventilation if necessary because high-level radioactive waste generates heat. In this study, the air velocity through diagonal branches with regulators of different sizes and in different locations, was measured. The air velocity is determined by the size of the first and last regulators, regardless of the size of other regulators. In the diagonal system. Consequently, once the desired total airflow rate has been achieved by installing the appropriate first and last regulators, the other regulators fan be evenly installed to maintain the minimum air velocity needed.

• Journal of Korea Spatial Information System Society
• /
• v.11 no.2
• /
• pp.99-110
• /
• 2009

Currently, there are many applications being developed based on sensor network technology. A tracking method for moving objects in sensor network is one of the main issue of this field. There is a little research on this issue, but most of the existing work has two problems. The first problem is a communication overhead for visiting sensor nodes many times to track a moving object. The second problem is an disability for dealing with many moving objects at a time. To resolve the problems, we, in this paper, propose a signature-based tracking method using efficient data aggregation for moving objects, called SigMO-TRK. For this, we first design a local routing hierarchy tree to aggregate moving objects' trajectories efficiently by using a space filtering technique. Secondly, we do the tracking of all trajectories of moving objects by using signature in a efficient way, our approach generates signatures to method. In addition, by extending the SigMO-TRK, we can retrieve the similar trajectories of moving objects for given a query. Finally, by using the TOSSIM simulator, we show that our signature-based tracking method outperforms the existing tracking method in terms of energy efficiency.

• Journal of Wetlands Research
• /
• v.13 no.3
• /
• pp.471-479
• /
• 2011

Evapotranspiration (ET) including evaporation from a land surface and transpiration from photosynthesis of vegetation is a hydrological factor that has an important role in water cycle. However, there is a limitation to understand it due to heterogeneity of land cover and vegetation. In this study, Mapping EvapoTRanspiration with Internalized Calibration (METRIC) model, one of the energy balance models, and MODerate resolution Imaging Spectroradiometer (MODIS) satellite based well-known Penman-Monteith algorithm were compared. Two ET maps were categorized and compared by land cover classification. The results represented overall applicability of the two models with the highest correlation coefficients in needleleaf and broadleaf forests. This study will be useful to estimate remote sensing based ET maps with high resolution and to figure out spatio-temporal variability and seasonal changes.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.21 no.6
• /
• pp.763-778
• /
• 2019

Abrasive waterjet cutting technology has been used for rock excavation of tunnels and underground structures due to various advantages. In order to cut rocks by using the abrasive waterjet system, abrasive is essential to enhance impact energies for fracturing the target rock. Since garnet abrasives are not produced in Korea, alternative abrasives, instead of garnets, are needed to achieve the economical waterjet cutting. This study is to analyze cutting performance for rocks with sandy particles as alternative abrasive. Cutting tests were carried out on granite specimens at the constant waterjet energy (e.g., water pressure or water flow rate). The five kinds of sands, sampled by construction fields and natural sites, were prepared to perform the experimental tests. When sea sand was used as an alternative abrasive, cutting performance was secured to be 60~70% compared to the commercial garnet abrasive. Thus, it is expected that sand abrasives can be applied on the waterjet cutting process for the economical excavation construction.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.43 no.3 s.309
• /
• pp.43-53
• /
• 2006

As wireless network technology has advanced, demands for multimedia contents through mobile environment have tendered to upward. Since network situation is changing every moment and types of user terminals are diverse, it is difficult for a content provider to consider network situation and type of user terminal to provide multimedia contents. As one solution, transcoding techniques have been proposed, but those have much complexity. In this paper, in order to reduce computational complexity, we propose a fast mode decision using input modes, motion vectors, and residual energies which are obtained from input bitstream for 2:1 down-scaling spatial transcoding application. The proposed method reduces processing time in mode decision by restricting possible mode types based on input information. Experimental results show that the proposed method achieves about 2.66 times improvement in encoding time compared to the normal encoding process while the PSNR is degraded by about 0.04dB, and bit-rate is increased by 1.6%.

• Clean Technology
• /
• v.20 no.3
• /
• pp.256-262
• /
• 2014

Catalytic oxidation characteristics of benzene as a VOC was investigated in a fixed bed flow reactor using $Cu/{\gamma}-Al_2O_3$ catalyst. The parametric tests were conducted at the reaction temperature range of $200{\sim}500^{\circ}C$, benzene concentration of 400~650 ppm, gas flow rate of 50~100 cc/min, and space velocity range of $7,500{\sim}22,500hr^{-1}$. The property analyses by using the BET, SEM, TGA and the conversion of catalytic oxidation of benzene were examined. The experimental results showed that the conversion was increased with decreasing benzene concentration, gas flow rate and space velocity. Benzene oxidation reaction over $Cu/{\gamma}-Al_2O_3$ catalyst could be expressed as the first order homogeneous reaction of which the activation energy was 17.2 kcal/mol and frequency factor was $1.33{\times}10^6sec^{-1}$.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.8 no.2
• /
• pp.205-213
• /
• 1988

It is not a simple task to optimize a cable stayed bridge, because it involves, in addition to the section properties, number and arrangement of cables, initial tension forces of cables, and type and height of the tower as design variables. This study deals with an optimization problem of cable stayed bridges considering initial cable forces, section properties of the girder and the tower, and coordinates of the tower. In order to avoid difficulties in dealing with numerous variables which interact mutually, separate design spaces are adopted for initial cable forces, section properties, and coordinates, respectively. Strain energy stored in the structure is used as the object function in the design of the initial cable forces, while weight of the structure is used in the design of section and coordinates. Upper and lower limits of the initial forces, allowable stresses including the effect of buckling, and lower limit of the sectional area are considered as constraints. The proposed method is applied to a fan type bridge and a harp type bridge. It is believed through comparison of the results to the previous results in the literature that the proposed method renders rational design values. It is also shown that the coordinate optimization, which is usually deleted in the optimization process, results in additional saving of materials.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.10 no.4
• /
• pp.22-34
• /
• 2007

The purpose of this study is to evaluate landscape characteristics of watersheds in the Nakdong River Basin for identifying the groups of watershed with similar landcover patterns by using Geographic Information System and statistical technique. According to the results based on the cluster analysis using cluster analysis tool in the ArcGIS 8.3 program, 22 sub-watersheds were classified into three types; "Forest watershed", "Agriculture watershed", and "Urban watershed". In the forest watershed that has the least potential of ecological disturbances by human, a forest management approach based on geographic conditions and coverage types, etc., should be developed to sustain the ecological and environmental functions of forest. For the agriculture watershed, environmental-friendly agricultural techniques should be performed in the particular enhancement of riparian buffer zone to the prevent direct inflow of soils, fertilizers, and other chemicals into the stream network. Finally, in the urban watershed, an environmental-friendly plan that may increase the ratio of pervious surface and amount of green-space to should be reserved.