• Tunnel and Underground Space
• /
• v.27 no.5
• /
• pp.253-262
• /
• 2017

The purpose of this paper is to analyze the crack characteristics by performing the compression test of the rock and concrete specimens. The experiments are carried out by using strain sensors which can measure length change and the AE sensor which can detect the elastic wave from the crack. The crack volumetric strain calculated from measured strain is shown in different shape on the rock and the concrete specimens. This is because the specimens have a different degree of brittleness. However, the crack volumetric strain associated with the fracture and damage was similar to accumulated AE energy of the two specimens. This means that the AE sensor can assess damage in real time without damaging the structure.

• Journal of KSNVE
• /
• v.9 no.1
• /
• pp.196-205
• /
• 1999

The existence. bifurcation. and the orbital stability of periodic motions, which is called nonlinear normal mode, in a nonlinear dual mass Hamiltonian system. which has 6th order homogeneous polynomial as a nonlinear term. are studied in this paper. By direct integration of the equations of motion. Poincare Map. which is a mapping of a phase trajectory onto 2 dimensional surface in 4 dimensional phase space. is obtained. And via the Birkhoff-Gustavson canonical transformation, the analytic expression of the invariant curves in the Poincare Map is derived for small value of energy. It is found that the nonlinear system. which is considered in this paper. has 2 or 4 nonlinear normal modes depending on the value of nonlinear parameter. The Poincare Map clearly shows that the bifurcation modes are stable while the mode from which they bifurcated out changes from stable to unstable.

• Journal of Korean Society of Transportation
• /
• v.28 no.4
• /
• pp.97-106
• /
• 2010

Environmental issues resulting from climate change and energy crises have become global issues, and cycling has gained greater popularity for sustainable transportation. Though many cities are trying to build bicycle roads, it is not easy to implement bicycle roads because there is little available space for bicycle facilities. Therefore, road diets have become more popular in Korea. However, there has been no intensive research to date of their impacts. The purpose of this research is to evaluate the effects of road diets and construction of bike lanes. Every benefit, including energy benefit, environmental benefit, and health benefit is considered, while only time savings benefit has been considered in previous studies. The benefit analysis for the Seoul metropolitan area as a case study shows that road diets have a (1) time saving benefit for only five percent of the mode share and (2) enough total benefit even if bicycle mode share is less than two percent.

• Proceedings of the Korean Vacuum Society Conference
• /
• 1999.07a
• /
• pp.156-156
• /
• 1999

자성박막에 존재하는 자기구역의 형상 및 동력학은, 자성박막의 학문적 연구와 응용기술 개발의 핵심을 제공하는 매우 중요한 분야의 하나로서, 최근 크게 관심이 고조되고 있다. 본 연구에서는 차세대 광자기 재질로 각광받고 있는 Co/Pd 다층박막에서의 자기구역 형상 및 자기구역 동력학을 연구하였다. 전자빔 진공증착 시스템을 사용하여, Co 층의 두께와 Pd층의 두께, 그리고 전체 층수가 변화하는 일련의 Co/Pd 다층박막 시료를 제작하였다. 제작된 모든 시료가 명목두께에 대하여 4%의 정밀도로 제작되었음을 확인하였고, 제작된 시료의 자기 및 광자기 성질은 자기이력곡선 등을 측정하였다. 또한 고성능 광자기 Kerr 현미경 시스템을 이용하여 자성박막에 존재하는 자기구역의 형상 및 자기구역 동력학을 관찰하였다. 이 장비는 1,000배의 배율에서 0.3$\mu\textrm{m}$의 공간분해능을 가지며 실시간 자기구역 영상을 CCD 카메라를 통해 컴퓨터에 저장함으로써, 자지구역 거동현상을 관찰할 수 있다. 자성다층박막에 존재하는 자기구역의 형상을 이론적으로 예측하기 위하여, 다층박막 구조에서의 정자기 에너지를 일반적으로 계산할 수 있는 이론을 유도하였다. 이 이론을 통해 다층박막의 자성층의 두께가 두꺼워짐에 따라, 자기구역의 형상이 단일 자기구역 형상에서 줄무늬 자기구역 형상으로 천이함을 예측할 수 있었고, 이러한 지구구역 천이현상을 Co-Pd 다층박막의 자화역전현상을 연구하였고, 새로운 자구동력학 정량분석기술을 개발하여 Co/Pd 다층박막에 적용함으로써 자화역전의 자구벽 이동속도와 핵형성 확률을 각각 정량적으로 구하였다. 이러한 관찰 및 분석기술을 통하여, Co/Pd 다층박막의 층구조에 따라 대조적인 자화역전현상이 존재함을 관찰하였다. 이러한 대조적인 자화역전현상을 결정짓는 요인을 연구하기 위해서 나노자성학이온을 이용한 자화역전현상을 결정짓는 요인을 연구하기 위해서 나노자성학이온을 이용한 자화역전모델을 개발하였으며, 이를 통하여 자성박막의 거시적 자기성질에 의해 이러한 대조적인 자화역전모델을 개발하였으며, 이를 통하여 자성박막의 거시적 자기성지에 의해 이러한 대조적인 자화역전현상이 결정될 수 있음을 설명하였다. 또한, 미시적 자기이력곡선 측정을 통하여 자성박막구조에 따른 국소적인 구조불균일성을 관찰하였고, 이러한 구조불균일성 또한 대조적인 자화역전현상을 결정하는 큰 요인임을 논의하였다.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.8 no.5
• /
• pp.113-119
• /
• 2008

Conventional 1-1-1 cooperative protocol offers path-loss gain as advantage of multi-hop and spatial diversity which is equivalent to MIMO system. This protocol is enable to get higher reliability and reduction of power consumption than those of the single-hop or multi-hop. But the 1-1-1 cooperative protocol get only the diversity order 2 and limited path-loss reduction gain because this protocol has a single cooperative relay. We propose 1-2-1 cooperative protocol using two cooperative relays R1, R2. The 1-2-1 cooperative protocol can improve path-loss reduction and increase diversity order 3. Moreover, the cooperative relay R2 attains diversity order 2. The signaling method in transmission uses DF (Decode and Forward) or DR (Decode and Reencode) and 1-2-1 DF/DR cooperative protocol are applied to clustering based wireless sensor networks (WSNs). Simulations are performed to evaluate the performance of the protocols under Rayleigh fading channel plus AWGN (Additive White Gaussian Noise).

• 전자공학회논문지 IE
• /
• v.43 no.3
• /
• pp.22-27
• /
• 2006

This paper presents the control system of high-efficiency automotive 35W metal-halide lamp ballast using the new control method and planar transformer. In this paper, the electronic ballast is designed so that digital control method by microcontroller can be applied to the electronic ballast for the lamp requirement and peripheral environment in order that metal-halide lamp, which has the complicated transient features, is to be applied to the automobile even if it has superior features in brightness, color rendering, light efficiency, and lifespan compared to the conventional halogen lamp. Also, the efficiency increase of the ballast is devised by being varied the switching frequency of Flyback Converter following the battery input voltage of the automobile. Being designed for high-frequency switching transformer of converter in planar form, reduction of loss, weight, overall size are realized and efficient power control in the automobile that had the limited energy and the limited space of battery is devised. The results of the proposed system is verified through various experiment results.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2011.05a
• /
• pp.472-472
• /
• 2011

탁도는 물의 상대적인 흐림 정도를 나타내는 척도로서 이는 빛이 물을 통과할 때 산란시키는 부유고형물질 때문에 발생한다. 토양침식에 의하여 지표수로 유입된 토사와 광물질은 하천의 수송 및 퇴적 과정을 거치며 이동한다. 이때 하상 퇴적물은 바닥으로부터 먹이를 찾는 유기체에 의해 뒤섞이며 입자들은 일정기간동안 물의 흐름에 의해 부유상태로 남아 있게 되고, 유입되는 영양소와 빛에 의하여 성장하는 조류 또한 탁도를 증가시키는 원인이 된다. 이러한 부유물질의 증가는 수중에 태양복사에너지 전달을 방해하여 수중생태계의 먹이사슬과 저서생물의 서식환경에 많은 영향을 미치고, 수표면 온도 또한 태양으로부터 열을 흡수하는 표면 근처의 부유물질에 의해 증가하여 용존산소의 양에도 영향을 미친다. 따라서 수체내 분포하고 있는 부유물질의 종류와 양 및 공간적 분포 파악은 수질문제와 재난 예방 및 생물의 서식환경 문제를 파악하고 해결하는 데 매우 중요하다. 그러나 부유물질에 부착되어 있는 영양소, 금속, 살충제 등은 물 순환 시스템을 통하여 끊임없이 운반되고 상류유역의 흐름 조건에 따라 시공간적으로 변화하기 때문에 이를 규명하는 것이 매우 어려운 실정이다. 이러한 문제를 해결하기 위하여 광역적인 탁수환경의 분석방법으로 원격탐사(Remote Sensing, 이후 RS) 기법을 이용한 방법이 제안되고 있다. 이미 선진국에서는 광역수계의 수질관리를 위해 RS 기법을 이용하여 신속하고 정확한 수질상태 파악을 시도하고 있으며, 우리나라에서도 KOMPSAT 발사를 계기로 RS 관련 기술이 비약적으로 진화하고 있다. 그러나 RS 데이터를 활용하는데 필수적인 분광학적 특성 규명에 대한 연구는 대부분 식생과 토양에 한정되어 있으며 수체에 대한 연구는 현장조사의 어려움으로 인하여 상당히 제한적인 수준이다. 따라서 본 연구에서는 탁도의 변화에 따른 분광반사 특성을 휴대용 분광복사계를 이용하여 규명하고, 이를 Landsat 위성영상에 적용하여 새만금 유역을 대상으로 완공 직후인 2006년부터 2010년까지의 탁수환경을 모니터링 하였다. 그 결과 새만금 유역 탁수환경을 정성적으로 확인할 수 있었으며, 이를 이용하여 탁수환경 연구에 RS 기법이 효과적임을 제시하고자 한다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.2
• /
• pp.164-170
• /
• 2016

The initial urban railway was only required to perform its role as means of transportation. As the time of staying in an underground platform was extended, it has been faced with the issues of environmental improvement as a living space. Therefore, the sliding automatic door, which is the basis of the screen door, is used widely for large distribution stores, hospitals, restaurants, and public offices for customers' convenience and as a convenient method to control access. Therefore, screen doors are required for the purpose of customers' convenience, securing safety, establishing pleasant station buildings, and energy savings. It would be also necessary to develop the optimal design technology for a screen door system through the design of element parts and to ensure reliability. Therefore, this paper calculated, interpreted, and verified the theoretical weight of the composition parts to verify the design drive hardness of the motor for screen doors necessary for the safety of subways.

• Journal of the Institute of Convergence Signal Processing
• /
• v.4 no.1
• /
• pp.1-8
• /
• 2003

Various methods have been studying to maintain and apply the multimedia inform abruptly increasing over all social fields, in recent years. For retrieval of still images, we is implemented content-based image retrieval system in this paper that make possible to retrieve similar objects from image database after segmenting query object from background if user request query. Query image is processed median filtering to remove noise first and then object edge is detected it by canny edge detection. And query object is segmented from background by using convex hull. Similarity value can be obtained by means of histogram intersection with database image after securing color histogram from segmented image. Also segmented image is processed gray convert and wavelet transform to extract spacial gray distribution and texture feature. After that, Similarity value can be obtained by means of banded autocorrelogram and energy. Final similar image can be retrieved by adding upper similarity values that it make possible to not only robust in background but also better correct object retrieval by using object segmentation method.

• Tunnel and Underground Space
• /
• v.19 no.2
• /
• pp.77-85
• /
• 2009

Flexible and lined segment air-tight tunnelling technology for Compressed Air Energy Storage-Gas Turbine(CAES-G/T) power generation was introduced. The distinguished characteristics of the air-tight tunnel system can be summarized by two facts. One is that the high inner pressure due to compressed air is sustained by surrounding rock mass with allowing sufficient displacement of lining segment. The other is that the air-tightness of storage tunnel was enhanced by adopting a specially designed rubber sheet. The flexible lined air-tight underground tunnel can be constructed at a comparatively shallow depth and near urban area so that the locally distributed CAES-G/T power generation can be accomplished. In addition, this air-tight tunnelling technology can be applied to a variety of energy underground storage tunnels such as Compressed Natural Gas(CNG), Liquifed Petroleum Gas(LPG), DeMethyl Ether(DME) etc.