• 한국신재생에너지학회:학술대회논문집
• /
• 2008.10a
• /
• pp.188-191
• /
• 2008

There have been many methods for producing natural gas from gas hydrate reservoirs in permafrost and sea floor sediments. It is well knownthat the depressurization should be a best option for Class 1 gas hydrate deposit, which is composed of tow layers: hydrate bearing layer and an underlying free gas. However many of gas hydrate reservoirs in sea floor sediments are classified as Class 2 that is composed of gas hydrate layer and mobile water, and Class 3 that is a single gas hydrate layer. The most appropriate production methods among the present methods such as thermal stimulation, inhibitor injection, and controlled oxidation are still under development with considering the gas hydrate reservoir characteristics. In East Sea of Korea, it is presumed that the thick fractured shale deposits could be Class 2 or 3, which is similar to the gas hydrate discovered offshore India. Therefore it is needed to evaluate the possible production methods for economic production of natural gas from gas hydrate reservoir. Here we would like to present the production of natural gas from gas hydrate deposit in East Sea with industrial flue gases from steel company, refineries, and other sources. The existing industrial complex in Gyeongbuk province is not far from gas hydrate reservoir of East Sea, thus the carbon dioxide in flue gas could be used to replace methane in gas hydrate. This approach is attractive due to the suggestion of natural gas productionby use of industrial flue gas, which contribute to the reduction of carbon dioxide emission in industrial complex. As a feasibility study, we did the NMR experiments to study the replacement reaction of carbon dioxide with methane in gas hydrate cages. The in-situ NMR measurement suggeststhat 42% of methane in hydrate cages have been replaced by carbon dioxide and nitrogen in preliminary test. Further studies are presented to evaluate the replacement ratio of methane hydrate at corresponding flue gas concentration.

• Journal of Energy Engineering
• /
• v.23 no.2
• /
• pp.125-148
• /
• 2014

This paper performs a historical analysis on the various factors contributing to the current carbon lock-in of Korean electricity industry by using techo-institutional complex. The possibilities of the industry's carbon lock-out toward more sustainable development are also investigated. It turns out that market, firm, consumer, and government factors are all responsible for the development of the carbon lock-in of Korean power industry; the Korean government consistently favoring large power plants based on the economy of scale; below-cost electricity tariff; inflation policy to suppress increases in power price; rapid demand growth in summer and winter seasons; rigidities of electricity tariff; and expansion of gas-fired and imported coal-fired large power plants. On the other hand, except for nuclear power generation and smart grid, environment laws and new and renewable energy laws are the other remaining factors contributing to the carbon lock-out. Considering three key points that Korea is an export-oriented economy, the generation mix is the most critical factor to decide the amounts of carbon emission in the power industry, and the share of industry and commercial power consumption is over 85%, it is unlikely that Korea will achieve the carbon lock-out of power industry in the near future. Therefore, there are needs for more integrated approaches from market, firm, consumer, and government all together in order to achieve the carbon lock-out in the electricity industry. Firstly, from the market perspective, it is necessary to persue more active new and renewable energy penetration and to guarantee consumer choices by mitigating the incumbent's monopoly power as in the OECD countries. Secondly, from the firm perspective, the promotion of distributed energy system is urgent, which includes new and renewable resources and demand resources. Thirdly, from the consumer perspective, more green choices in the power tariff and customer awareness on the carbon lock-out are needed. Lastly, the government shall urgently improve power planning frameworks to include the various externalities that were not properly reflected in the past such as environmental and social conflict costs.

• Journal of the Korean Geographical Society
• /
• v.49 no.6
• /
• pp.865-883
• /
• 2014

This study investigated the carbon offset project activities as the activities of producing commodities by a case study on the Korean Clean Development Mechanism(CDM) industry. This study draw the networks of Korean CDM industry by extracting major agents and surrounding agents and by analyzing the characteristics of the linkages. The project participants owning the CDM projects hires CDM consultancies and designated operational entities(DOEs). The technical knowledge for carbon emission reduction made links between project participants and the CDM project operational knowledge made links between project participants and CDM consultancies. Links between project participants and DOEs are affected by social and geographical proximities. The value of the knowledge for CDM industrial activities determined the role of agents and type of linkages. The agents with the irreplaceable knowledge could be a project conducting firms. The agents without it became outsourcing contractors.

• Journal of Energy Engineering
• /
• v.26 no.4
• /
• pp.92-99
• /
• 2017

In Korea, the zero energy building was designated as the 7 new industries in the Ministry of Land and the 8 new industries in the Ministry of Industry. In order to maximize the insulation performance of the building envelope, improve the efficiency of building equipment, We are aiming. It is necessary to analyze the energy requirements of the buildings (cooling, heating, hot water supply, lighting, ventilation) of buildings with energy efficiency level of 1++ which is equivalent to the zero energy building certification system in Korea, It is aimed to be used as basic data for the advancement of energy building certification system. Zero Energy Building certification is estimated to be 61 buildings by 2017, and the approximate reference value and the first energy requirement for each of the five loads are calculated considering passive and active aspects. It is difficult to say that it is a clear standard because there is a small sample of data for calculating the load standard. However, it is necessary to interpret various methods in order to upgrade the Zero Energy Building certification standard in the future.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2013.05a
• /
• pp.538-539
• /
• 2013

수평 자세제어에 관한 연구는 플랜트 외부에서 발생하는 미지의 진동이나 불특정 외란이 인가되었을 때 이러한 외란을 적절히 제거하여 플랜트의 안전성을 확보할 수 있는 중요한 기술이다. 특히 수평 자세제어에 대한 문제는 선박이나 항공기 등 진동이나 미지의 외란이 발생하는 비선형시스템에 대하여 플랜트의 안전성을 확보하기 위하여 다양한 제어 알고리즘을 적용하여 진동 및 외란을 제거하고 있다. 본 논문에서 활용하고자하는 수평 자세제어용 액추에이터는 전자기적 에너지를 직선운동을 하는 기계적 운동 에너지로 변환하는 장치로서 산업현장에서 많이 활용하고 있는 액추에이터이다. 이러한 리니어 액추에이터(linear actuator) 3개로 구성된 3축을 활용하여 리니어 액추에이터 상부에 놓여진 플랜트의 수평을 제어하고자 한다. 또한 플랜트의 수평 상태를 계측하기 위한 센서로는 플랜트에 인가되는 외란을 계측하기 위한 가속도 센서 및 정확한 플랜트의 자세를 계측하기 위한 자이로 센서를 활용하여 플랜트의 수평 상태를 계측하도록 하며, 3개의 리니어 액추에이터를 제어하기 위한 마이크로프로세서를 기반으로 PID 제어기를 설계하여 리니어 액추에이터를 활용한 수평제어 성능을 제시하고 한다.

• Journal of Climate Change Research
• /
• v.7 no.1
• /
• pp.59-68
• /
• 2016

The world's major countries have focused on the renewable energy industry as the solution to climate change and the energy crisis. Nevertheless, there are no studies on the economic effects of the renewable energy industry. This study analyzed the economic effects of Korea's renewable energy industry by using the 2010 Input-Output Table. It is estimated that Korea's renewable energy industry made a production-induced effect of 2.0262 won, and a value-added-induced effect of 0.6138 won through an increase in output growth of 1 won, and an employment-induced effect of 2.3046 labors through an increase in output growth of 1 billion won. Both the effect ratio and the response ratio were greater than 1, which means the renewable energy industry is an intermediate manufacturing industry whose forward linkage effect and backward linkage effects are large. These results show differences with previous studies that classified electricity sector and renewable energy industry into final primary production industries. It is expected that the economic effects of the renewable energy industry will become greater in the future. Therefore, research on statistics related to the renewable energy industry is needed for more precise analysis.

• Korean Chemical Engineering Research
• /
• v.61 no.1
• /
• pp.142-154
• /
• 2023

As the importance of the environment has been recognized worldwide, the need to calculate and reduce carbon emissions has been drawing an increasing attention throughout various industrial sections. Thereby the discipline of LCA (Life Cycle Assessment) involving raw material preparation, production processes, transportation and installation has been established. There is a clear research gap between the need and the practice for Korean Case of renewable energy industry, particularly wind power. To bridge the gap, this study conducted LCA research on wind power generation in the Korean area of Yeongdeok, an example of a domestic onshor wind power complex using SimaPro, which is the most widely used LCA system. As a result of the study, the energy recovery period (EPT) of one wind turbine is about 10 months, and the GHG emitted to generate power of 1 kwh is 15 g CO₂/kWh, which is competitive compared to other energy sources. In the environmental impact assessment by component, the results showed that the tower of wind turbines had the greatest impact on various environmental impact sectors. The experience gained in this study can be further used in strengthening the introduction of renewable energy and reducing the carbon emission in line with reducing climate change.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2011.05a
• /
• pp.38.1-38.1
• /
• 2011

최근 중동정세의 변화와 유류 소비의 증가에 따른 유가의 급등과, 일본 지진사태로 일어난 원자력 발전의 안정성에 대한 문제로 인하여 안전하고 깨끗하게 에너지를 생산할 수 있는, 저탄소 녹색성장을 구현할 수 있는 신재생 에너지에 관련된 연구에 많은 관심이 모아지고 있다. 특히 태양광 에너지를 전기로 변환하여 사용하는 것은 최근 가장 큰 관심사 중 하나이다. 나노결정 Si (nc-Si) 박막은 이러한 광전자 산업 및 태양 에너지 분야에서의 폭넓은 응용 가능성으로 많은 연구가 진행되고 있다. 이러한 nc-Si 박막의 발광 특성은 비정질 박막내 Si 나노결정에 기인한 양자제한효과(quantum confinement effect)에 의한 것으로 알려져 있다. 본 연구에서는 증착시 기판에 AC (alternating current) Bias를 인가하여 PE CVD 기법으로 nc-Si:H 박막을 증착하였다. H2와 SiH4를 각기 45, 20 sccm으로, 100 W의 RF 전압을 주어 플라즈마를 생성하였으며, 60~900 Hz의 주파수 범위에서 60 V의 Bias를 인가하여 박막을 증착하였다. 이들 박막의 결정 크기, 결정화도, 나노 구조 및 광학적, 화학적, 기계적 특성을 XRD, FT-IR, Raman spectroscopey, AFM, PL, Nano indenter 등을 사용하여 조사하였으며, 기판에 인가된 전압과 주파수에 따른 결정크기와 박막의 광학적 특성과 상관관계를 고찰하였다. Bias 전압에 따라 ~1에서 ~4 nm의 크기를 갖는 나노 크리스탈이 생성 되었으며, 최고 10%의 나노결정 분율을 가지는 박막을 증착하였다. 이는 광학적 특성에도 영향을 주어 PL (photoluminescence)의 피크는 470~710 nm의 영역에서 관찰되었다. 또한 AC-Bias의 영향으로 박막 내 응력 해소에도 영향을 주어 박막내 존재하는 응력이 결정에 미치는 영향도 알 수 있었다. 이번 발표에선 증착 조건에 따른 박막의 나노구조 및 광학적 특성의 변화와 이들 간의 상관관계를 발표하고자 한다.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2022.05a
• /
• pp.122-122
• /
• 2022

기후변화 대응 및 탄소 저감 노력의 일환으로 신재생에너지의 개발 및 활용이 전 세계적으로 활발하며, 우리나라에서도 2050년 탄소중립 달성을 위하여 친환경 에너지 시스템 구축에 많은 노력을 기울이고 있다. 전통적인 재생에너지인 수력은 발전의 효율성, 안정성과 발전 제어의 용이함 때문에 널리 사용되고 있으나, 경제성을 확보하기 위한 댐, 보의 설치 및 대규모 발전설비가 필요하여, 생태계, 환경 파괴 등의 문제점 등을 수반하여, 최근 들어 대규모 사업이 이루어지지 못하고 있다. 이러한 흐름에 따라 최근에는 유럽을 중심으로 친환경 소수력 발전으로 회전 나선형 아르키메데스 수차를 활용한 소수력 발전의 적용이 이루어지고 있으며, 특히 2000년대 이후 독일을 중심으로 활발히 개발되고 있다. 또한 휴대용 초소수력 발전은 새로운 산업분야로 민간용 초소수력 발전기의 개발 및 판매가 국내외에서 증가하고 있으며, 우리나라에서도 자연 하천 환경에 활용 가능한 초소수력 발전의 필요성이 꾸준히 제기되고 있다. 본 연구에서는 저유량 및 저낙차에 적용 가능한 '초소형 회전 나선형 아르키메데스 수차', 초소형 발전에 적합한 '발전기 및 발전시스템', 자연환경을 훼손하지 않는 친환경 '유도수로'로 구성되어, 원하는 하천이나 수로 등에 손쉽게 설치 가능한 초소형 소수력 발전시스템을 개발하였다. 회전 나선형 아르키메데스 수차는 3D프린터로 제작한 후, 강화 코팅제를 도포하여 내구성을 확보하였다. 상용 AC발전기, 소형 발전기용 '발전기 및 발전시스템'을 적용하고, 콘트롤 보드를 맞춤형으로 제작하여 경제성을 확보하였다. 이러한 발전 시스템은 개발 테스트 중에 있으며 향후 방류수로, 하수구 등 현장 적용을 준비 중에 있다.

• The Journal of the Korea Contents Association
• /
• v.10 no.2
• /
• pp.215-223
• /
• 2010

The excessive use of fossil fuel since the industrial revolution increased the level of $CO_2$(the main cause of global warming also known as the greenhouse gas) and lead by the first world countries actions toward decreasing the greenhouse gas are taking place world wide. Naturally finding and using new environment friendly energy in design is on the increase. Thus as one solution to these problems the following thesis suggests a public toilet with solar energy technology applied.