• The Journal of Korean Society for Radiation Therapy
• /
• v.23 no.1
• /
• pp.51-58
• /
• 2011

Purpose: In this study, we tried to check the usefulness of two Linear Accelerators, Clinac IX and 21EX (Varian, Palo Alto, CA), which are equipped in Ajou Medical Center. From 2008 to 2010, we evaluated the error range of Absolute Dose based on the daily output, which was measured by CHECKMATE$^{TM}$ (Sun Nuclear, Melbourne, FL). Materials and Methods: For Daily Q.A, photon beams of two linear accelerators, 21EX and IX (6 MV and 10 MV, respectively) were measured daily by using CHECKMATE$^{TM}$ just before the treatment began, while the absolute dose was measured biweekly by using water phantom. We analyzed the data of measured values from the daily Q.A and the absolute dose from 2008 to 2010 for 21EX, and from 2009 to 2010 for IX. We utilized Excel 2007 (Microsoft, USA) to evaluate Average, Standard deviation and Confidence level of the data. Furthermore, in order to check the measured values of CHECKMATE$^{TM}$ and the significance of absolute dose, each error value was compared and analyzed. Results: During the observation period, the output of two equipment's absolute dose increased in process of time and in both 6 MV and 10 MV, there was a similar increasing trend. In addition, the error rate of the measured value of CHECKMATE$^{TM}$ and the value of absolute dose were under 0.34, which means that there is a similarity relationship between the two measured values. After checking that the measured value of CHECKMATE$^{TM}$ increased, We measured the absolute dose to adjust that. When the error range was close to 2~3%, the number of changing the output was four for 21EX and three for IX. Conclusion: As a result of measuring and analyzing the daily output changes for two years by using CHECKMATE$^{TM}$, we could find that there is a significance between the output which we should obey during Q.A, and the measured value of absolute dose within the error tolerance of 2~3%. Thus, the use of CHECKMATE$^{TM}$ can be positively considered for more efficient and reliable daily output verification of linear accelerator. It can also be a good standard for other medical centers to understand the trends of linear accelerator and to refer to for the correction of each output.

• Korean Journal of Optics and Photonics
• /
• v.13 no.3
• /
• pp.197-203
• /
• 2002

The TiO$_2$ coating solutions were synthesized with different concentrations (T1-0.7N, T2-2.0N) of hydrochloric acid used as catalyst. and TiO$_2$ thin films were prepared by sol-gel dip coating. Their structural and optical properties were examined as a function of calcination temperature. XRD results showed that T1 thin films calcined at 400~80$0^{\circ}C$ had the anatase phase, while those calcined at 100$0^{\circ}C$ had the rutile phase. T2 thin films calcined at 40$0^{\circ}C$ and $600^{\circ}C$ had the anatase phase, with the rutile phase for calcination at 80$0^{\circ}C$. Crystallinity of T2 thin films was superior to that of T1 thin films. The crystallite size of TiO$_2$ thin films increased with increasing calcination temperature, and the crystallite size of anatase phase in T2 thin films was larger than that in T1 thin films, but the crystallite size of rutile phase in T2 thin films was smaller. The surface morphology of the films showed that the films were formed more densely in the rutile phase than in the anatase phase, this phenomenon appeared conspicuously in T2 thin films. The transmittance of the samples with thin films on quartz glass calcined at 100$0^{\circ}C$ was significantly reduced at wavelength range about 300-700 nm due to the increased absorption originating from the change of crystallite phase and composition of the films and the scattering effect originating from increasing crystallite size. The refractive index of TiO$_2$ thin films increased, and hence the film thickness as well as the porosity of TiO$_2$ thin films decreased with increasing calcination temperature. Furthermore, the refractive index of T2 thin films was higher than T1 thin films, and porosity of T2 films was lower.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.22 no.1
• /
• pp.468-476
• /
• 2021

This study examined the effects of a hydrothermal pretreatment (HP) on the nutritional values and in vitro fermentation characteristics of tall fescue and corn silage. This study was conducted through a factorial design of 2 (control or HP) × 2 (hay; tall fescue or silage; corn). For the HP, forage was placed into a glass bottle with 20% w/v of water, and the glass bottle was sealed and heated to reach a temperature of 121℃ (0.12 MPa). The solid residue and liquid were collected and oven-dried at 65℃ for three days. The dried materials were tested for in vitro fermentation at 39℃ for 24 and 48 h. The content of ADF increased significantly regardless of the forage type. After in vitro incubation for 24 h, the total VFA content was significantly lower after HP, regardless of the forage type (p ≤ 0.05), and the propionate concentration was increased in corn silage with HP (p ≤ 0.05). After 48 hours of in vitro incubation, the propionate content increased significantly (p ≤ 0.03) in corn silage with HP (p ≤ 0.05), but the butyrate content decreased significantly (p ≤ 0.05). There was no change in the in vitro dry matter and neutral detergent fiber digestibility by HP regardless of the forage type. Therefore, the use of hydrothermally pretreated corn silage could be advantageous for the supply of energy for ruminants.

• Journal of Wetlands Research
• /
• v.24 no.3
• /
• pp.204-212
• /
• 2022

The LID technique began to be applied in Korea after 2009, and LID facilities are installed and operated for rainwater management in business districts such as the Ministry of Environment, the Ministry of Land, Infrastructure and Transport, and LH Corporation, public institutions, commercial land, housing, parks, and schools. However, looking at domestic cases, the application cases and operation periods are insufficient compared to those outside the country, so appropriate design standards and measures for operation and maintenance are insufficient. In particular, LID facilities constructed using LID techniques need to maintain the environment inside LID facilities because hydrological and environmental effects are expressed by material circulation and energy flow. The LID facility is designed with the treatment capacity planned for the water circulation target, and the proper maintenance, vegetation, and soil conditions are periodically identified, and the efficiency is maintained as much as possible. In other words, the soil created in LID is a very important design element because LID facilities are expected to have effects such as water pollution reduction, flood reduction, water resource acquisition, and temperature reduction while increasing water storage and penetration capacity through water circulation construction. In order to maintain and manage the functions of LID facilities accurately, the current state of the facilities and the cycle of replacement and maintenance should be accurately known through various quantitative data such as soil contamination, snow removal effects, and vegetation criteria. This study was conducted to investigate the current status of LID facilities installed in Korea from 2009 to 2020, and analyze soil changes through the continuity and current status of LID facilities applied over the past 10 years after collecting soil samples from the soil layer. Through analysis of Saturn, organic matter, hardness, water contents, pH, electrical conductivity, and salt, some vegetation-type LID facilities more than 5 to 7 years after construction showed results corresponding to the lower grade of landscape design. Facilities below the lower level can be recognized as a point of time when maintenance is necessary in a state that may cause problems in soil permeability and vegetation growth. Accordingly, it was found that LID facilities should be managed through soil replacement and replacement.

• The Journal of Engineering Geology
• /
• v.34 no.3
• /
• pp.367-379
• /
• 2024

We analyzed the changes in the properties of the Mudeungsan tuff by conducting an artificial weathering experiment based on the climatic conditions of Mudeungsan National Park, to evaluate the long-term stability of the columnar jointing in the tuff. The climate of Mudeungsan National Park over 20 years suggests the temperature conditions for freeze-thaw are -20 to 30℃. The change in tuff properties due to weathering were estimated by measuring the elastic wave velocity, which was measured after every 40 freeze-thaw cycles. Based on the origin of the Mudeungsan tuff and fracture distribution in the tuff, the elastic wave velocity in samples from 24 locations was measured at regular intervals in the axial and radial directions. The axial elastic wave velocity of the Mudeungsan tuff is 5,187~5,367 m/s, and the radial elastic wave velocity is 4,001~5,290 m/s. As a result of 200 freeze-thaw cycles, the axial elastic wave velocity decreased by 5.53% for sample MT-1, 4.89% for MT-2, and 5.36% for MT-3. The radial elastic wave velocity decreased by 20.00% for MT-1, 17.02% for MT-2, and 19.84% for MT-3. The decrease in elastic wave velocity due to the freeze-thaw cycles is greater for low values of elastic wave velocity. For the axial elastic wave velocity, the weathering is accelerated after 120 cycles and, for the radial elastic wave velocity, weathering actively progresses from the start of the freeze-thaw cycles. In summary, for a low elastic wave velocity, experimental weathering results in a large decrease in elastic wave velocity. In addition, the Mudeungsan tuff and its columnar joints have a distinct anisotropy.

• The Journal of Korean Society for Radiation Therapy
• /
• v.26 no.2
• /
• pp.257-264
• /
• 2014

Purpose : Photoneutron dose in high-energy photon radiotherapy at linear accelerator increase the risk for secondary cancer. The purpose of this investigation is to evaluate the dose variation of photoneutron with different treatment method, flattening filter, dose rate and gantry angle in radiation therapy with high-energy photon beam ($E{\geq}8MeV$). Materials and Methods : TrueBeam $ST{\time}TM$(Ver1.5, Varian, USA) and Korea Tissue Equivalent Proportional Counter (KTEPC) were used to detect the photoneutron dose out of the high-energy photon field. Complex Patient plans using Eclipse planning system (Version 10.0, Varian, USA) was used to experiment with different treatment technique(IMRT, VMAT), condition of flattening filter and three different dose rate. Scattered photoneutron dose was measured at eight different gantry angles with open field (Field size : $5{\time}5cm$). Results : The mean values of the detected photoneutron dose from IMRT and VMAT were $449.7{\mu}Sv$, $2940.7{\mu}Sv$. The mean values of the detected photoneutron dose with Flattening Filter(FF) and Flattening Filter Free(FFF) were measured as $2940.7{\mu}Sv$, $232.0{\mu}Sv$. The mean values of the photoneutron dose for each test plan (case 1, case 2 and case 3) with FFF at the three different dose rate (400, 1200, 2400 MU/min) were $3242.5{\mu}Sv$, $3189.4{\mu}Sv$, $3191.2{\mu}Sv$ with case 1, $3493.2{\mu}Sv$, $3482.6{\mu}Sv$, $3477.2{\mu}Sv$ with case 2 and $4592.2{\mu}Sv$, $4580.0{\mu}Sv$, $4542.3{\mu}Sv$ with case 3, respectively. The mean values of the photoneutron dose at eight different gantry angles ($0^{\circ}$, $45^{\circ}$, $90^{\circ}$, $135^{\circ}$, $180^{\circ}$, $225^{\circ}$, $270^{\circ}$, $315^{\circ}$) were measured as $3.2{\mu}Sv$, $4.3{\mu}Sv$, $5.3{\mu}Sv$, $11.3{\mu}Sv$, $14.7{\mu}Sv$, $11.2{\mu}Sv$, $3.7{\mu}Sv$, $3.0{\mu}Sv$ at 10MV and as $373.7{\mu}Sv$, $369.6{\mu}Sv$, $384.4{\mu}Sv$, $423.6{\mu}Sv$, $447.1{\mu}Sv$, $448.0{\mu}Sv$, $384.5{\mu}Sv$, $377.3{\mu}Sv$ at 15MV. Conclusion : As a result, it is possible to reduce photoneutron dose using FFF mode and VMAT method with TrueBeam $ST{\time}TM$. The risk for secondary cancer of the patients will be decreased with continuous evaluation of the photoneutron dose.

• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.24 no.2
• /
• pp.267-281
• /
• 2019

Energetic mesoscale eddies in the East Sea (ES) associated with strong mesoscale variability impacting circulation and environments were statistically characterized by analyzing satellite altimeter data collected during 1993-2017 and in-situ data obtained from four cruises conducted between 2015 and 2017. A total of 1,008 mesoscale eddies were detected, tracked, and identified and then classified into 27 groups characterized by mean lifetime (L, day), amplitude (H, m), radius (R, km), intensity per unit area (EI, $cm^2/s^2/km^2$), ellipticity (e), eddy kinetic energy (EKE, TJ), available potential energy (APE, TJ), and direction of movement. The center, boundary, and amplitude of mesoscale eddies identified from satellite altimeter data were compared to those from the in-situ observational data for the four cases, yielding uncertainties in the center position of 2-10 km, boundary position of 10-20 km, and amplitude of 0.6-5.9 cm. The mean L, H, R, EI, e, EKE, and APE of the ES mesoscale eddies during the total period are $95{\pm}104$ days, $3.5{\pm}1.5cm$, $39{\pm}6km$, $0.023{\pm}0.017cm^2/s^2/km^2$, $0.72{\pm}0.07$, $23{\pm}21TJ$, and $588{\pm}250TJ$, respectively. The ES mesoscale eddies tend to move following the mean surface current rather than propagating westward. The southern groups (south of the subpolar front) have a longer L, larger H, R, and higher EKE, APE; and stronger EI than those of the northern groups and tend to move a longer distance following surface currents. There are exceptions to the average characteristics, such as the quasi-stationary groups (the Wonsan Warm, Wonsan Cold, Western Japan Basin Warm, and Northern Subpolar Frontal Cold Eddy groups) and short-lived groups with a relatively larger H, higher EKE, and APE and stronger EI (the Yamato Coastal Warm, Central Yamato Warm, and Eastern Japan Basin Coastal Warm eddy groups). Small eddies in the northern ES hardly resolved using the satellite altimetry data only, were not identified here and discussed with potential over-estimations of the mean L, H, R, EI, EKE, and APE. This study suggests that the ES mesoscale eddies 1) include newly identified groups such as the Hokkaido and the Yamato Rise Warm Eddies in addition to relatively well-known groups (e.g., the Ulleung Warm and the Dok Cold Eddies); 2) have a shorter L; smaller H, R, and lower EKE; and stronger EI and higher APE than those of the global ocean, and move following surface currents rather than propagating westward; and 3) show large spatial inhomogeneity among groups.

• The Korean Journal of Nuclear Medicine
• /
• v.34 no.1
• /
• pp.55-61
• /
• 2000

Purpose: We performed this study to evaluate the changes of gallbladder ejection fraction (GBEF) in diabetic patients with or without autonomic neuropathy. Materials and Methods: This study included 37 diabetic patients (25 women, 12 men, mean age 51 years) and 24 normal controls (10 women, 14 men, mean age 38 years). After intravenous injection of 185 MBq of $^{99m}Tc$-DISIDA, serial anterior abdominal images were acquired before and after fatty meal. Regions of interest were applied on gallbladder and right hepatic lobe on 60 and 90 minute images to calculate GBEF. Results: GBEF was significantly reduced in diabetes with autonomic neuropathy ($43{\pm}12.3%$) and without autonomic neuropathy ($57.5{\pm}13.2%$) compared with normal controls ($68{\pm}11.6%$, p<0.05). And also, GBEF was significantly reduced in diabetes with autonomic neuropathy compared with diabetes without autonomic neuropathy (p<0.05). Fasting blood glucose level, age, sex, hemoglobin Alc, body mass index, serum lipid level were not different in these two diabetic patient groups (p>0.05). When 50.2% of GBEF was used as the criteria for diabetic autonomic neuropathy, the sensitivity and specificity were 80%, 76.5%, respectively. The area under receiver operating characteristic curve was 0.846. Conclusion: GBEF of diabetic patients with autonomic neuropathy was significantly reduced than that of diabetic patients without autonomic neuropathy.

• Journal of Animal Science and Technology
• /
• v.44 no.2
• /
• pp.251-260
• /
• 2002

The corn (Zea mays L) planting date in a double-cropping system is delayed until mid-May due to delayed rye harvest on May. This experiment was conducted to determine the optimum harvesting time for high yield and the best quality of silage corn at late planting date after harvesting winter rye. Corns were planted on 21 May and harvested at eight different maturity stage at Seoul National University Experimental Livestock Farm, Suwon in 1997. Maturities were B (blister; 16 days after silking), M (milk; 20 days), LM (late milk; 24 days), SD (soft dough; 28 days), ED (early dent; 33 days), FD (full dent; 38 days), LD (late dent; 44 days) and PM (physiological maturity; 53 days) stages. The percentage of whole plant dry matter (DM) showed optimum range for silage making (29.0 to 38.5%) when corn plant was harvested at between ED and LD stages. Maximum whole plant DM (14,831 kg/ha) and total digestible nutrients (TDN) yields (10,675 kg/ha) reached at full dent stage. The percentage of whole plant acid detergent fiber (ADF) was decreased from 35.4 to 22.1%, and that of neutral detergent fiber (NDF) was also decreased from 63.8 to 46.0% as harvest stage progressed. These changes in chemical compositions were associated with changes in plant part composition. A progressive increase in total ear, and the decrease in stover portion in the plant were observed with advance in harvest stage. Calculated on net energy for lactation (NEL) and TDN values based on ADF percentage of stover plant decreased by ED stage and then increased by PM stage. But NEL and TDN values of ear and whole plant increased as harvest stage progressed. While in vitro dry matter digestibility of stover was decreased from 61.1 to 49.7%, whole plant was increased from 58.3 to 65.7% as maturity advanced (P$<$0.05). The results of this study indicate that corn can be harvested for silage at full (1/2 milkline) and late dent (2/3 milkline) stages for maximum yield and optimum quality at late planting. And days after silking at late planting was 38 and 44 days.

• Korean Journal of Poultry Science
• /
• v.31 no.4
• /
• pp.229-235
• /
• 2004

A study was conducted to examine the effect of dietary supplementation of multiple probiotics (EM) on growth performance, blood cholesterol, intestinal micro flora, and fecal gas emission in broiler chicks. A total of 450 one day old male broiler chicks (Ross $\times$ Ross) were divided into six treatments with five replications in each treatment for five weeks. Treatments were factorially designed with two levels of diet containing probiotics (DW; 0, $0.2\%$) and three levels of drinking water containing probiotics (DW; 0, 0.01, $0.1\%$). Basal diets contained $21.5\%$ CP and 3,100 kcal/kg ME for starting and $19\%$ CP and 3,100 kcal/kg ME for finishing period. Weight gain, feed intake, and feed conversions of birds fed with probiotics were not significantly different between Ds. Total cholesterol and triglyceride levels were significantly lower (P<0.05) in birds fed with DW $0.01\%$ or $0.1\%$ compared with no probiotics group, but there was no significant difference between D treatments. The number of E. coli, Salmonella and Lactobacillus in the ileum and cecum of the birds fed multiple probiotics were not significantly different from those of no probiotic groups. There were no significant differences in the $CO_2$ gas emissions of fecal between birds fed with Ds or among birds fed with DW. However, $NH_3$ gas emissions of DW $0.1\%$ were significantly lower (P<0.05) than DW $0\%$. In the results of this study, supplementation of probiotics tended to decrease the serum cholesterol and triglyceride compared to those of control groups and reduction of fecal $NH_3$ gas emission.