• Title/Summary/Keyword: 에너지경사

Search Result 357, Processing Time 0.033 seconds

Numerical Solution of the Mild Slope Equation Using Conjugate Gradient Method (반복기법을 사용한 완경사방정식의 수치해석)

  • 윤종태
    • Proceedings of the Korean Society of Coastal and Ocean Engineers Conference
    • /
    • 1993.07a
    • /
    • pp.26-28
    • /
    • 1993
  • 해안구조물의 설치나 해안환경 문제를 다룰때 가장 필수적인 것이 그 지역에서의 정확한 파랑자료이다. 파랑은 천해로 전파해 옴에 따라 수심 및 지형변화로 인한 회절 및 굴절을 겪으면서 변하게 되므로 복잡한 지형을 가진 해안에서의 정확한 파랑계산은 용이한 일이 아니다. 이러한 파랑변형에 대한 연구는 Berkhoff(1972)가 완경사방정식을 발표한 후 큰 진전을 보이게되는데 이로 인해 종래 개별적으로 다루던 굴절과 회절을 함께 취급할 수 있게 되고 파향선이 교차할때 생기는 불합리한 에너지의 집중(caustics)을 해결할 수 있게 되었다. (중략)

  • PDF

Tributary bed stability method by main channel dredge in Nakdong river (낙동강 본류하도 준설에 따른 지류하상 안정화 기법)

  • Lee, Jun-Ho;Choo, Tai-Ho;Jee, Hong-Ki
    • Proceedings of the Korea Water Resources Association Conference
    • /
    • 2011.05a
    • /
    • pp.275-279
    • /
    • 2011
  • 본 연구는 낙동강 본류의 하도준설로 인하여 본류에 유입하는 지류하천의 하상고와 본류와의 하상고간의 높이차가 크게 발생됨에 따른 지류하상 안정화 기법을 금호강을 대상으로 검토하였다. 지류하천의 하상고와 본류와의 높이차가 크게 발생됨에 의해 하천을 직강화하여 첩수로를 만들게 되고 하상 경사는 커지게 된다. 이 경우 유량과 하상 재료의 변화는 없으므로 Lane 식에서 우변 하상 경사의 증가는 좌변의 증가를 가져오며 따라서 유사량의 증가를 가져온다. 즉 하천이 급해지면서 유사량이 증가한다. 이에 따라 직강 구간에서 하상의 세굴을 가져오게 된다. 실제로, 하천 개수 사업에서 직강화는 하상의 세굴과 저하보다는 통상 하폭의 확대를 가져온다. 지류 입장에서는 본류 수면이 일종의 기준면이 되므로 기준면의 저하를 의미하며, 이는 지류 에너지 경사의 증가를 의미한다. 이 경우 Lane 관계식에서 하상 경사의 증가는 좌변의 증가를 가져오며, 하상 재료가 일정한 상태에서 이는 유사량의 증가를 가져온다. 즉 지류의 하상 경사와 유사량 증가는 하상의 침식을 의미하며, 이러한 침식은 상류로 진행된다. 이를 두부 침식이라 한다. 따라서 본 연구에서는 낙동강 본류하도 준설에 따른 지류하상의 하상변동과 지류유입 토사량에 대해서 검토하겠다.

  • PDF

Effect of fill material of gabion drop structures in open channel on subflow (개수로 돌망태 낙차공의 채움재가 복류에 미치는 영향)

  • Kim, Yong Hyun;Son, Sang Jin;Shin, Seung Suk;Park, Sang Deog
    • Proceedings of the Korea Water Resources Association Conference
    • /
    • 2022.05a
    • /
    • pp.277-277
    • /
    • 2022
  • 급경사 산지하천은 호우 시 퇴적 하상이 붕괴하여 하천 유사량을 급격히 증가시키는 계곡형 토석류가 발생하고 도로와 교량에 피해를 일으키기도 한다. 이러한 하천재해를 저감하기 위하여 돌망태 낙차공을 설치하여 하상 안정을 강화하고 급경사에 따른 유수에너지를 줄일 수 있다. 급경사 하상에 설치한 돌망태 낙차공은 하류부 하상의 국부세굴에 따른 파괴위험이 완경사 하상의 경우에 비하여 높으므로 이를 줄이기 위한 연구가 필요하다. 이 연구에서는 광폭경사조절 개수로에 돌망태 낙차공을 설치하고 낙차공의 채움재가 복류의 특성에 미치는 영향을 파악하기 위하여 수리실험을 하였다. 수리실험에서는 최대 20º까지 경사를 조절할 수 있는 길이 1.44m, 폭 0.14m인 직사각형 단면 개수로에 SUS304 구슬을 사용하여 하상과 돌망태 낙차공을 설치하고 실험하였다. 구슬은 크기에 따라 작은구슬(10.31mm), 중간구슬(15.08mm), 큰구슬(20.63mm)을 사용하고, 하상에는 작은구슬을 깔았다. 낙차공의 크기는 길이 16cm이고 폭과 높이는 12cm이며, 돌망태는 작은구슬을 사용한 단일돌망태와 구슬 크기를 달리한 계층돌망태로 구분하였다. 계층돌망태의 상층은 작은구슬, 중층은 중간구슬, 하층은 큰구슬이 채움재로 사용되었다. 단일돌망태의 공극율은 0.399이고 계층돌망태의 공극률은 상층 0.393, 중층 0.517, 하층 0.54이다. 실험유량의 변화는 낙차공 하단부에서 표면류가 발생하지 않는 범위로 한정하였다. 낙차공 하단에서 상류 68cm 지점의 소류력과 낙차공 내부 복류의 수면경사를 측정하였다. 그 결과 단일돌망태보다 계층돌망태가 소류력과 수면경사가 더 작은 것으로 나타났으며 돌망태의 공극을 통한 통수능 차이 때문인 것으로 판단된다.

  • PDF

Application of Iterative Procedure to the wave Field with Energy Dissipation Area (에너지 감쇠역을 포함하는 파랑장에 대한 반복기법의 적용)

  • 윤종태
    • Journal of Ocean Engineering and Technology
    • /
    • v.12 no.1
    • /
    • pp.120-127
    • /
    • 1998
  • An Elliptic model for calculating the combined refraction/diffraction of monochromatic linear waves is developed, including a term which allows for the dissipation of wave energy. Conjugate gradient method is employed as a solution technique. Wave height variations are calculated for localized circular and rectangular dissipation areas. It is shown that the numerical results agree very well with analytical solution in the case of circular damping region. The localized dissipation area creates a shadow region of low wave energy and the recovery of wave height by diffraction occurs very slowly with distance behind the damping region.

  • PDF

The effect incident angle of the Pt film on a counter electrode for dye-sensitized solar cells (염료감응형 태양전지의 상대전극 경사코팅을 통한 효율 개선 연구)

  • Lee, Kyoung-Jun;Seo, Hyun-Woong;Son, Min-Kyu;Hong, Ji-Tae;Kim, Hee-Je
    • 한국신재생에너지학회:학술대회논문집
    • /
    • 2008.05a
    • /
    • pp.419-421
    • /
    • 2008
  • Sputter deposition on a Pt counter electrode was studied using RF plasma as the improvement of conversion efficiency for dye-sensitized solar cells (DSC). The effects of the sputtering thickness and incident angle on a Pt counter electrode for DSC was scrutinized. We conducted the experiment to get the optimal sputtering time for the performance of the DSC. Under the sputtering time condition of 120 seconds, we varied the incident angles of substrate from $0^{\circ}$ to $60^{\circ}$. Under standard test condition (AM 1.5, 100mW/$cm^2$), we obtained the maximum efficiency of 4.61% at the incident angle of $40^{\circ}$ with an active cell area of $1cm^2$.

  • PDF

Natural Convection Heat Transfer from a Hot Body in an Inclined Square Enclosure (경사진 정사각형 밀폐공간 내에 있는 고온부로부터의 자연대류 열전달)

  • Kwon, Sun-Sok;Chung, Tae-Hyun
    • Solar Energy
    • /
    • v.12 no.1
    • /
    • pp.25-33
    • /
    • 1992
  • Laminar natural convection heat transfer from a hot body in a square enclosure has been stooled for various inclination angles at $Gr=1.5{\times}10^5$, Pr= 0.71 and $k_s/k_f=14710$. The area of a hot body is 1/25 of the enclosure and the aspect ratio is 1.0. The total mean Nusselt number decreases as the inclination angle increases and in case of ${\theta}=90^{\circ}$ is 14% lower than that of ${\theta}=0^{\circ}$.

  • PDF

Analysis of Maximum Solar Radiation on Inclined Surfaces in Korea (국내 최대 경사면일사량 분석)

  • Jo, Dok-Ki;Yun, Chang-Yeol;Kim, Kwang-Deuk;Kang, Young-Heack
    • 한국태양에너지학회:학술대회논문집
    • /
    • 2009.04a
    • /
    • pp.3-7
    • /
    • 2009
  • The amount of incident rays over inclination according to direction has been widely utilized as important data in installing solar thermal systems. To optimize the incident solar radiation, the slope, that is the angle between the plane surface in question and the horizontal, and the solar azimuth angles are needed for these solar thermal systems. This is because the performance of the solar thermal systems in much affected by angle and direction of incident rays. Recognizing that factors mentioned above are of importance, actual experiment on the moving route of the sun have been performed in this research to obtain the angle of inclination with which the maximum incident rays can be absorbed. After all, the standard for designing highly optimized solar thermal systems will be provided for designers and employees working in the solar collector related industries.

  • PDF

Development of Curve-Shaped Wave Generation System (곡선형 조파시스템 개발)

  • Lee, Changhoon;Kim, Min Kyun;Cho, Yong Jun;Koo, Seok Kun
    • Proceedings of the Korea Water Resources Association Conference
    • /
    • 2004.05b
    • /
    • pp.468-473
    • /
    • 2004
  • 본 연구에서는 기존의 ㅡ자형, ㄴ자형, ㄷ자형 조파시스템이 경사진 방향으로 가동될 때 발생되는 에너지의 불연속성으로 인한 회절철상이나 구조물에서 반사된 파가 조파판에서 발생하는 재 반사 철상의 단점을 보완할 수 있도록 곡선형태의 조파판을 배치하여 수치실험을 행하였다. 조파판을 곡선형으로 배치시켜 실험 대상물에서부터 반사된 파가 가능한 조파판에 직각으로 부딪치도록 유도하였다. 편미분 격자생성기법을 도입하여 구성된 곡선형 격자망에서 Copeland(1985)의 완경사 방정식을 이용하여 수치해석 하였다. 우선, 1차원 실험영역에서 파를 생성하여 대상구조물에서 반사되어 돌아온 반사파 성분을 조파판에서 흡수하면서 입사파를 생성하는 현상을 재현하였다. 그 후, 실험영역을 2차원으로 확장시켜 조파판을 곡선형으로 배치하여 수치 실험하여 진행파와 회절파의 중첩으로 고안된 해석해와 수치 해를 비교하려다. 그 결과, 기존의 조파시스템에 비하여 에너지 불연속선에서의 회절 현상도 발생하지 않고 반사파 성분을 효율적으로 흡수하는데 효과적임을 알아냈다.

  • PDF

Flow Resistance Characteristics of Hollowness-Block Channel Bed (중공블럭 하상의 흐름저항 특성)

  • Chae, Kuk-Sheok;Park, Sang-Deok;Shin, Seung-Sook;Cho, Jae-Woong
    • Proceedings of the Korea Water Resources Association Conference
    • /
    • 2007.05a
    • /
    • pp.870-873
    • /
    • 2007
  • 하천의 수공 구조물은 홍수 시 작용하는 유수력에 대한 안정성을 확보해야 한다. 본 연구에서는 최근 개발된 친환경 식생호안블록인 중공블록을 하상에 설치할 경우 흐름에 미치는 영향을 연구하였다. 중공블록을 설치한 개수로에 대한 수리모형 실험을 실시하여 흐름저항과 경계층 특성에 대한 중공블록의 영향을 평가하였다. 흐름저항 특성 인자인 Manning의 조도계수와 Darcy-Weisbach의 마찰손실계수는 일정한 유량과 하상경사의 경우 수심에 큰 영향을 받고 이들은 서로 비례관계에 있음을 확인하였다. 그러나 마찰손실계수가 증가하더라도 어느 한계점 이상이 되면 조도계수는 일정한 값으로 수렴한다. 개수로의 경계층의 높이는 하천의 흐름특성과 구조특성을 반영하는 것으로 수심, 유속, 에너지경사, 경계면의 상대조도, Reynolds수, Froude수 등의 함수로 나타낼 수 있다. 중공블록이 설치된 개수로의 조도계수는 일반하천의 경우와 비교하여 큰 값을 나타내고 있어 중공블록이 흐름저항을 크게 증가시키는 것으로 판단된다.

  • PDF

Analysis of Maximum Solar Radiation on Inclined Surfaces for the Installation of Solar Thermal Systems in Korea Using the Optimum Installation Angle (국내 태양열시스템 설치를 위한 시스템 최적 설치각 산출을 통한 최대 경사면일사량 분석)

  • Jo, Dok-Ki;Kang, Young-Heack
    • Journal of the Korean Solar Energy Society
    • /
    • v.29 no.2
    • /
    • pp.47-54
    • /
    • 2009
  • The amount of incident rays over inclination according to direction has been widely utilized as important data m installing solar thermal systems. To optimize the incident solar radiation, the slope, that is the angle between the plane surface in question and the horizontal, and the solar azimuth angles are needed for these solar thermal systems. This is because the performance of the solar thermal systems in much affected by angle and direction of incident rays. Recognizing that factors mentioned above are of importance, actual experiment on the moving route of the sun have been performed in this research to obtain the angle of inclination with which the maximum incident rays can be absorbed. After all, the standard for designing highly optimized solar thermal systems will be provided for designers and employees working in the solar collector related industries.