• Proceedings of the Korean Information Science Society Conference
• /
• 1999.10a
• /
• pp.427-429
• /
• 1999

원격 링킹 로더는 크로스 컴파일러에 의하여 컴파일된 목적 코드를 원격 타겟 시스템에 전송하여 실행할 수 있게 한다. 이 링킹 로더는 내장형 프로세서를 탑재한 시스템에서 사용되는 소프트웨어 개발 환경에 널리 써왔다. 본 연구의 점진적 원격 링킹 로더는 목적 모듈을 호스트로부터 타겟으로 로딩하는 원격 로딩과 모듈이 로딩될 때 이미 로딩된 모듈들과 통합 링킹하는 점진적 링킹의 역할을 수행한다. 특히, 점진적 링킹은 여러 모듈들이 로딩/언로딩 될 때 사용자가 로딩/언로딩 순서를 고려해야 하는 번거로움을 해결하였다. 본 논문에서는 원격 로딩과 점진적 링킹을 가능하게 하는 로딩/언로딩 알로리즘을 제시하였다. 그리고 이 알고리즘은 [8]에서 개발된 타겟 서버 미들웨어 시스템에서 구현하였다. 본 논문에서 제시하는 점진적 언격 링킹 로더는 내장형 시스템의 개발 환경 사용에 보다 많은 사용자 편의성을 줄 것으로 기대된다.

• Transactions of the Society of Information Storage Systems
• /
• v.3 no.4
• /
• pp.183-190
• /
• 2007

In most hard disk drives that apply the ramp load/unload technology, the head is unloaded at the outer edge of the disk while the disk is rotating. During the unloading process, slider-disk contacts may occur by lift-off force and rebound of the slider. The main issue of this paper is to prevent the slider-disk contact by rebound, and we apply a disk bump to the unloading process. To do so, first, the ranges of bump dimension are determined. Second, the stability of each bump is checked by dynamic simulation. Finally, unload simulations are performed for stable bump designs. As a result of these steps, the effect of the bump design and the position for the unloading performance were investigated. As a consequence, we propose the optimal bump design to improve the unloading performance. Furthermore, we can identify to remove rebound contact by applying a bump on disk during the unloading process.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2008.04a
• /
• pp.618-621
• /
• 2008

Most hard disk drives that apply the ramp load/unload technology unload the heads at the outer edge of the disk while the disk is rotating. During the unloading process, slider-disk contacts may occur by lift-off force and rebound of the slider. The main issue of this paper is to prevent the slider-disk contact by changing the state matrix. Because the state matrix is related to the suspension and slider, to change the state matrix means the structural change of the suspension and slider. We investigate influence for variation of the state matrix components and analyze the relation between the state matrix and the suspension/slider.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2005.11a
• /
• pp.314-317
• /
• 2005

There are many benefits such as increased areal density, reduced power consumption, applied smaller size and improved shock resistance in Load/Unload(L/UL) mechanism. It has been the key technology of developing small form factor hard disk drive used in portable digital devices. The main objectives of L/UL are no slider-disk contact and faster L/UL process. For realizing those, we must consider many design parameters in L/UL systems. In this paper, we focus on the effects of ramp profile. We can investigate dynamic characteristics of suspension tap and slider on ramp during unloading process experimentally. In special, we examine the effects of vortical velocities, ramp slopes and disk vibrations. As the result of these experiments, we propose design criteria of advanced ramp profile for good unloading performance.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.51 no.8
• /
• pp.195-201
• /
• 2014

In this paper, we developed a LGP(Light Guide Panel) dry cleaning system for particle cleaning using corona discharge and dry adhesive roll. Therefore, we design a cleaning mechanism that can be applied dry adhesive dust removal roll and ESD(electrostatic discharge) by using corona discharge. Also, we design and implementation of equipment, which can loading, unloading and transfer LGP automatically. The developed equipment is dust and particle cleaning experimental results to demonstrate its stability.

• Proceedings of the KAIS Fall Conference
• /
• 2012.05b
• /
• pp.516-519
• /
• 2012

산업 현장에 필수적으로 사용하는 유틸리티 시스템(Utility System)의 하나인 에어를 생산하는 공기압 축기의 운전방식은 조작 패널부에 사용자가 설정한 셋팅값에 의해 내부의 밸브를 제어하여 로딩 및 언로딩 운전을 한다. 이로 인해 대용량(100HP, 200HP)의 공기압축기를 여러대 사용하는 수용가에서는 연속 다발적인 운전으로 인한 전력 사용량의 변동으로 역률 저하 및 연속가동으로 인한 설비 과부하 및 내부 기계 베어링 피로도 증가 및 파손 등 고장이 발생되는 문제점이 있다. 따라서 본 논문에서는 인공 신경회로망(ANN:Artificial Neural Network)을 이용하여 최적의 에너지 운용 알고리즘을 제안하여 실계통의 문제점을 분석하여 개선하고자 한다.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.17 no.3
• /
• pp.243-249
• /
• 2005

The present study has been conducted to simulate dynamics of a gas engine-driven heat pump(GHP) for design of control algorithm. The dynamic modeling of a GHP was based on conservation laws of mass and energy. For automatic control of refrigerant pressures, actuators such as engine speed, outdoor fan, coolant three-way valves and liquid injection valve were PI or P controlled. The simulation results showed physical behavior that is realistic enough to apply for control algorithm design.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.16 no.6
• /
• pp.187-192
• /
• 2007

In this paper we present a 3-DOF manipulator of which task is to unload the product from a micro factory. The micro factory developed by KITECH presses sheet metal to produce a micro valve that is used for micro pump. Our research is focused on the development of a small-sized unloading manipulator which works in the narrow workspace between the dies. We have implemented pick-and-place task with vacuum pressure and 3-DOF motion with stepping motors. We present the design procedures and analysis required in each module.

• Journal of KIISE:Computer Systems and Theory
• /
• v.35 no.8
• /
• pp.378-384
• /
• 2008

Many embedded systems are supporting Java as their software platform via Java virtual machine. Java virtual machine manages memory automatically by providing automatic memory management, i.e. garbage collector. Because only scarce memory is available to embedded system, Java virtual machine should use small memory and manage it efficiently. This paper introduces two memory management techniques to exploit small memory in Java virtual machine which can execute multiple Java applications concurrently. First, compaction based garbage collection is introduced to overcome external fragmentation problem in presence of immovable memory area. Then garbage collector driven class unloading is introduced to reduce memory use of unnecessary loaded classes. We implemented these techniques in working embedded system and observed that they are very efficient, since more Java applications are able to be executed concurrently and memory use is also reduced with these techniques.

• Journal of the Korean Applied Science and Technology
• /
• v.29 no.4
• /
• pp.561-569
• /
• 2012

Study attempts to evaluate the environmental cost and benefit for management of particulate matters of Donghae harbor in Gangwondo. The level of fine dust suspended in the vicinity of the harbor was quite high, exceeding the national standard ($100{\mu}g/m^3$) depending on the places. The test field harbor deals with lots of limestone and coal, so that fine particulates could be generated while loading it and unloading. It was estimated that the direct handling of cargos might produce 12 tons of PM10(Particulate Matters of $10{\mu}m$) a year. In addition, heavy vehicles for transportation of various cargos including raw materials emit huge amount of diesel soots and cause to redispersion of road dust. The local government spends more than 2 billion won every year, and it contributes to reduce the atmospheric dust. According to the prediction of cost to benefit, it will present the effectiveness in 720 % maximum and at least 240 %.