• The Korean Journal of Malacology
• /
• v.27 no.2
• /
• pp.115-119
• /
• 2011

To establish technical development for artificial seed production, growth and survival for early young spats of the hard clam, Meretrix petechialis, were investigated by breeding methods. Adult clams were collected at Hasa-ri, Baeksu-eup, Yeonggwang-gun, Jeollanam-do on July 13, 2010, and then transported to the indoor aquarium at the laboratory. Eggs which were taken from mother clams, were inseminated, and after they were fertilized in the aquarium, 60 million bottom-clinging spats ($198{\pm}12{\mu}m$ in shell length) were produced and bred. The breeding experiments were carried out from July 16 to October 4, 2010 for 80 days. The methods of sand box, sand bottom circulation filter, inclosing net, floor were used for the breeding experiments, and the experimental condition of sea water temperature for larvae were at 25, 28, 31, $34^{\circ}C$. Four marine cultured food organisms were used for this study as follows: Isochrysis galbana, Chaetoceros gracilis, Phaeodactylum tricornutum, Tetraselmis tetrathele. According to the experimental conditions, experimental groups of the spats in the early stage were investigated the growth rate and the survival. As the result, the method of the inclosing net section was the fastest (grew up to $2.64{\pm}0.59{\mu}m$ in shell length), followed by sandbox ($2.59{\pm}0.64{\mu}m$, bottom circulating filter ($2.56{\pm}0.52{\mu}m$), and floor ($2.52{\pm}0.56{\mu}m$). The survival was the highest in the experimental condition of sandbox (35.9%), followed by floor (34.6%), bottom circulating filter (29.5%), and inclosing net (9.3%). Eexperimental condition of water temperature of $34^{\circ}C$ showed the fastest growth rate (grew up to $2.70{\pm}0.76{\mu}m$ in shell length), and showed the latest growth rate (grew up to $2.45{\pm}0.41{\mu}m$ in shell length) at $25^{\circ}C$. The survival (%) was the highest under the water temperature conditions at $31^{\circ}C$, and showed the lowest (14.2%) at $34.^{\circ}C$. The growth rate of the experimental group fed the mixture live food was the fastest with shell length $2.52{\pm}0.66{\mu}m$, and that of experimental group fed P. tricornutum showed the latest (grew up to $2.29{\pm}0.43{\mu}m$ in shell length). The survival was the highest (36.9%) under the experiment condition fed mixture live food and experimental group fed T. tetrathele showed the lowest rate (16.2%).

• Journal of KIISE:Software and Applications
• /
• v.37 no.6
• /
• pp.455-463
• /
• 2010

In this paper, we present an approach to sentence boundary detection for web documents that builds on statistical-based methods and uses rule-based correction. The proposed system uses the classification model learned offline using a training set of human-labeled web documents. The web documents have many word-spacing errors and frequently no punctuation mark that indicates the end of sentence boundary. As sentence boundary candidates, the proposed method considers every Ending Eomis as well as punctuation marks. We optimize engine performance by selecting the best feature, the best training data, and the best classification algorithm. For evaluation, we made two test sets; Set1 consisting of articles and blog documents and Set2 of web community documents. We use F-measure to compare results on a large variety of tasks, Detecting only periods as sentence boundary, our basis engine showed 96.5% in Set1 and 56.7% in Set2. We improved our basis engine by adapting features and the boundary search algorithm. For the final evaluation, we compared our adaptation engine with our basis engine in Set2. As a result, the adaptation engine obtained improvements over the basis engine by 39.6%. We proved the effectiveness of the proposed method in sentence boundary detection.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.33 no.5
• /
• pp.375-384
• /
• 2011

Purpose: The advent of microsurgical technique and instruments, particularly in the field of perforator flap and supermicrosurgery, which have expanded the scope of microsurgery. However, supermicroanastomosis without any compression, tension, or distortions must be achieved to reach successful outcomes. Small-caliber vessels, such as those with an internal diameter less than 0.2 mm, are susceptible to inadvertent twisting of the anastomosis. In this study, using the superficial inferior epigastric artery (SIEA)-based flap model in Sprague-Dawley (SD) rats, we evaluated the acceptable limits of twisting effects on supermicroanastomotic sites. Methods: A total of 20 supermicroanastomoses were performed using the SIEA-based flap model in 10 male SD rats, 10-weeks-of-age, weighing 300~350 g. Rats were divided into five groups of two with four flaps as follows: 1) sham, 2) control group with end to end SIEA arterial supermicroanastomosis, 3) experimental I (EA1) with $90^{\circ}$ twisting, 4) experimental II (EA2) with $180^{\circ}$ twisting, and 5) experimental III (EA3) with $270^{\circ}$ twisting of the supermicroanastomosis. Each SIEA was anastomosed using six 11-0 $Ethilon^{(R)}$ (Ethicon Inc. Co., NJ, USA) stitches except in the sham group where the SIEA was only clamped with Supermicro vascular $clamps^{(R)}$ (S&T, Neuhausen, Switzerland) for 20 minutes. Results: The anastomosed arterial patency showed no remarkable changes according to doppler waveforms measured with a Smardop 45 Doppler System (Hadeco Inc., Kawasaki, Japan). The pulsatility index (PI) was increased at postoperative day 10 in the EA2 and EA3 groups, and the resistance index (RI) showed no statistically significant difference between preoperative and postoperative values at 10 days. Histologic specimens from the EA3 group showed increased tunica media necrosis, convolution of the internal elastic lamina, densely packed platelets, fibrin, and erythrocytes. Flap viability and anastomosed vessel patency were not significantly affected by the degree of arterial twisting in this study, other than in the EA3 group where minor effects on arterial patency of the microanastomoses were encountered. Conclusion: It appears that minor twisting on small caliber arteries, used in supermicroanastomoses, can be tolerated. However, twisting should be avoided as much as possible, and more than $180^{\circ}$ twisting must be prevented in clinical practice.

• Korean Journal of Ichthyology
• /
• v.11 no.1
• /
• pp.86-93
• /
• 1999

Artificial fertilization of flounder, Limanda herzensteini caught at Pohang brook was performed in April 13, 1995 and hatched larvae were reared for 25 days to describe the development of eggs and the morphogenesis of larvae. The fertilized egg was buoyant, colorless and spherical in shape, measuring 0.86~0.96 mm in diameter (mean: 0.90 mm), The egg has no oil globule, and its perivitelline space was narrow. Hatching in the indoor tank with $16.0^{\circ}C$ in mean water temperature started from the 64 hours after fertilization. The newly hatched larva, measuring about 2.80 mm in total length, had 10~11+25~27=35~38 myomeres. The anus is open at about the anterior point of the body. The 3 to 4 days old larva was 3.90 mm in total length. In this larva the eyes were black and the mouth was open. The yolk was consumed in 8 to 9 days. In 20 to 22 days after hatching, the larvae grew 6.1 mm in total length. The eyes were located symmetry on both sides of head.

• Korean Journal of Ichthyology
• /
• v.27 no.1
• /
• pp.1-9
• /
• 2015

The morphological and skeletal development and larvae and juvenile of Sebastes koreanus were studied. The Sebastes koreanus were caught at Yeosu-si, Jeolla-namdo from March in 2014. Larvae beared at water temperature of $13.5{\sim}15.5^{\circ}C$ (mean $14.5{\pm}0.1^{\circ}C$). The just beared larvae were 6.38~6.43mm(mean $6.40{\pm}0.02mm$, n=5) in total length and their mouth and anus were already opened. They began to eat rotifer and transformed to postlarva stage. 5 days after bearing postlarvae was measured 6.45~6.49 mm (mean $6.47{\pm}0.02mm$) in total length. 15 days after bearing postlarvae was measured 6.55~6.72mm(mean $6.64{\pm}0.08mm$) in total length. 60 days after bearing juvenile was measured 15.5~20.0 mm (mean $17.7{\pm}2.25mm$) in total length with dorsal fin rays X IV-12~13; anal fin rays III-7; caudal fin rays 16.

• Korean Journal of Ichthyology
• /
• v.21 no.4
• /
• pp.221-226
• /
• 2009

Six microsatellite DNA markers were used to investigate the genetic variability between wild populations and cultured stocks of olive flounder Paralichthys olivaceus. The average of observed (Ho) and expected heterozygosity (He) ranged from 0.722 to 0.959, and from 0.735 to 0.937, respectively. There was no distinguishable difference between the wild populations and cultured stocks in terms of the observed and expected heterozygosities. However, number of alleles per locus differed markedly between the two fish groups: 19.7 to 21.8 for the wild populations and 12.0 to 14.7 for the cultured stocks. This result gives important information concerning the production of seedling for the improvement of genetic diversity in this species.

• The Korean Journal of Malacology
• /
• v.30 no.4
• /
• pp.303-309
• /
• 2014

The development of Japanese geoduck, Panopea japonica, grown under culture conditions, has been examined through the morphological characteristics in fertilized egg, larvae and juvenile. Gametes were stripped from ripe broodstock and placed into two separate containers. Eggs were washed through a $40{\mu}m$ sieve and fertilized with dilute sperm solution. Developing larvae were maintained at $19{\pm}1^{\circ}C$. Fertilized eggs with $81.6{\mu}m$ diameter developed to trochophores within 14 h and to D-stage larvae ($116{\mu}m$ shell length) within 27 h. Larvae were spontaneously settled at shell length of $311{\mu}m$ after 20 days. The hatching from fertilized eggs and larval rearing were normally available in $18.5-21.5^{\circ}C$, and the growth was good in a cashmilon substrate, as well as sand. After rearing of day 108 from metamorphosis, the shell length of juvenile P. japonica reached 13 mm, and growth rate of shell length of the juvenile was $117.5{\mu}m/d$.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.19 no.4
• /
• pp.93-104
• /
• 2017

This study is a basic study to develop shoe last design technology to enhance and revitalize the competitiveness of the handmade shoes. In-depth interviews were conducted with four manufacturers in Seongsu-dong to identify the production status and design technology of shoe lasts. The result of the research is as follows. Firstly, shoe lasts for adults are produced at intervals of 5mm between 245mm-285mm for men's shoes, and between 220-260mm for women's shoes. The production rate of women's shoes was high in the order of general type, boot type, and sandal type while men's shoes mainly produce general type. Secondly, the master last size and ball girth rating for men's and women's shoes were analyzed to EE-EEE grade at 260mm and D grade at 235mm. The length of the master last for men's shoes is 276-290mm, the heel width is 60-65mm, the ball width is 88-90mm, the ball girth is 250mm, and the waist girth is 248mm. The length of the master shoe last for women's shoes is 236-245 mm, the heel width is 50-55mm, the ball width is 78-80mm, the ball girth is 211~213mm, and the waist girth is 213~215mm. Thirdly, the last grading deviation is 5mm in length, the heel width is 0.5mm, the ball girth is 3.5mm, and the ball with is 1.2mm. The ball girth dimensions of Oxford type, slip-on type, and sneakers type are made at 250mm, 248mm, and 245mm for men's shoes. For women's shoes, the ball girth dimensions of pump type, loafer & boot type, and sandal type are made at 211~213mm, 214~215mm, and 211mm. Fourthly, t+he construction of the automation system is insufficient and almost completely depends on manual production.

• Development and Reproduction
• /
• v.7 no.1
• /
• pp.29-34
• /
• 2003

Anatomical and histological observations were used to examine the morphological differentiation and development of the digestive tract during ontogenesis in tiger puffer, Taklyugu rubripes. Before hatching, the digestive tract was located between yolk sac and notochord of embryo. Newly hatched larvae had a straight tubular digestive tract. The larval mouth opened at 2 days after hatching (DAH). At 4 DAH, sphincters separated the digestive tract into the esophagus, anterior intestine, mid-intestine and rectum, and the anus was opened. At 5 DAH, the larval intestine bent between the anterior and intermediate parts and mucous cells developed in the esophageal epithelium. At this time yolk sac was absorbed completely. At 6 DAM, the digestive tract was differentiated into the U type with expansion of the anterior intestine toward the head of the larvae. At 10 DAH, the expanding anterior intestine became wider and a elliptical. At 15 DAH, the anterior intestine was divided into two portions by invagination of dorsal epithelium and the mid-intestine was convoluted dorsally. At 21 DAM, the frontal portion of the anterior intestine formed a differentiated expansion sac. At 24 DAH, the second convolution was observed in the anterior part of the posterior intestine. At 30 DAH the expansion sac was extended longitudinally and the digestive tract took on the form seen in adult fish.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.33 no.3
• /
• pp.233-240
• /
• 2011

Purpose: To apply a computer assisted navigation system to orthognathic surgery, a simple and efficient measuring algorithm calculation based on affine transformation was designed. A method of improving accuracy and reducing errors in orthognathic surgery by use of an optical tracking camera was studied. Methods: A total of 5 points on one surgical splint were measured and tracked by the Polaris $Vicra^{(R)}$ (Northern Digital Inc Co., Ontario, Canada) optical tracking system in two cases. The first case was to apply the transformation matrix at pre- and postoperative situations, and the second case was to apply an affine transformation only after the postoperative situation. In each situation, the predictive measuring value was changed to the final measuring value via an affine transformation algorithm and the expected coordinates calculated from the model were compared with those of the patient in the operation room. Results: The mean measuring error was $1.027{\pm}0.587$ using the affine transformation at pre- and postoperative situations and the average value after the postoperative situation was $0.928{\pm}0.549$. The farther a coordinate region was from the reference coordinates which constitutes the transform matrixes, the bigger the measuring error was found which was calculated from an affine transformation algorithm. Conclusion: Most difference errors were brought from mainly measuring process and lack of reproducibility, the affine transformation algorithm formula from postoperative measuring values by using of optic tracking system between those of model surgery and those of patient surgery can be selected as minimizing the difference error. To reduce coordinate calculation errors, minimum transformation matrices must be used and reference points which determine an affine transformation must be close to the area where coordinates are measured and calculated, as well as the reference points need to be scattered.