• Title/Summary/Keyword: 양중

Search Result 302, Processing Time 0.029 seconds

A Basic Study of Crane Trajectory Distance Calculation for Sustainable PC Members Erection of Large Logistic Building (대형물류센터 PC부재 양중을 위한 크레인 궤적거리 산정 기초 연구)

  • Lim, Jeeyoung;Oh, Jinhyuk;Kim, Sunkuk
    • Proceedings of the Korean Institute of Building Construction Conference
    • /
    • 2023.05a
    • /
    • pp.77-78
    • /
    • 2023
  • As large logistics buildings have high floor heights and long spans, these buildings are designed as PC structures, and large cranes are used to lift PC members. PC erection planning can generally cause errors depending on the field engineer's experience. To solve this problem, a basic analysis method is needed to establish a systematic PC member erection plan. Crane work can be minimized if the trajectory is easily and quickly calculated according to the location of the crane and applied to the site. Therefore, the objective of this study is a basic study of crane trajectory distance calculation for sustainable PC members erection of large logistic building. In this study, a crawler crane commonly used for lifting PC members is limited. The trajectory distance for the PC erection plan was automatically calculated using the algorithm.

  • PDF

An Optimal Design Algorithm of Pile Supported Foundations of Tower Cranes (타워크레인의 파일기초 최적설계 알고리즘 개발)

  • Ryu, Sang-Yeon;Seo, Deok-Seok;Kim, Sun-Kuk
    • Journal of the Korea Institute of Building Construction
    • /
    • v.9 no.5
    • /
    • pp.95-101
    • /
    • 2009
  • As buildings increase in height, lifting plans are becoming increasingly important on construction sites. As a critical piece of load-lifting equipment, the tower crane deserves a well thought-out stability review, since it has a significant impact and is very vulnerable to structural safety disaster. To ensure the structural stability of a tower crane, its lateral support or pile supported foundation designs must include consideration for stability, and pile foundation must be used if site conditions prevent soil from providing the required bearing capacity, or prevent the foundation from being increased to the required extent. Pile supported foundation design requires thorough and systematic review, as more stability parameters need to be considered than with an independent foundation. This paper intends to develop an optimal design algorithm that can minimize associated costs while ensuring the fundamental stability of pile supported foundation design, limiting the scope of research to fixed-type trolley tower cranes using pile supported foundations. The findings herein on pile foundation stability review parameters, process and optimal design are expected to improve the operational efficiency of staff concerned, and reduce the time and efforts required for pile foundation design.

A Survey of Pesticide Residues of Citrus Fruits and Citrus Orchard Soil in Jeju Island - Part 2. On the Pesticide Residue of Citrus Orchard Soil - (제주도(濟州道)의 감귤(柑橘)및 감귤원토양(柑橘園土壤)에 관(關)한 잔류농약조사(殘留農藥調査) - 제2보(第二報), 감귤원(柑橘園) 토양중(土壤中)의 농약잔류(農藥殘留)에 관(關)하여 -)

  • Lee, Kyu-Seung
    • Applied Biological Chemistry
    • /
    • v.23 no.3
    • /
    • pp.184-188
    • /
    • 1980
  • A survey of pesticide and copper residues of the citrus orchard soil was conducted during October 1979-June 1980 in Jeju, Seogwipo county. The citrus orchards were classified into five groups according to different cultivated period; 5 year orchard, 10 year orchard, 15 year orchard, 20 year orchard, and 30 year orchard. Each of the above samples was divided again to three layers of soil depth; the surface layer$(0{\sim}10cm)$, the middle layer $(10{\sim}20cm)$, and the bottom layer $(20{\sim}40cm)$. In this experiments, Kelthane and Akar, as well as copper residues were detected in all soil samples. Residue levels of above chemicals were increased in soils of orchard with longer cultivation periods, and at the same time, decreased with soil depth. The residues of those ranged as follows; a) from trace to 1.359ppm in Kelthane, b) from trace to 0.925ppm in Akar, and c) from trace to 40.734ppm in copper. It is noted that the average residues of Kelthane was 0.251ppm, Akar, 0.120ppm, and that of copper was 2.168ppm, respectively.

  • PDF

Identifying Construction Engineering Tasks at the Design Phase for Enhancing Constructability in High-rise Building Construction - Focused on Temporary Work - (고층 건축공사의 시공성 향상을 위한 설계단계의 시공엔지니어링 업무 도출 - 가설공사를 중심으로 -)

  • Lee, Jin-Woong;Cho, Kyu-Man;Kim, Tae-Hoon
    • Journal of the Korea Institute of Building Construction
    • /
    • v.17 no.5
    • /
    • pp.453-463
    • /
    • 2017
  • Due to the increase in the size of buildings and scale, the importance of construction engineering that reflects the constructability from the design stage of the project is increasing. Especially, engineering efforts related to facilities, equipment and construction methods for temporary work at the design stage can significantly contribute to improvement of constructability and project performance. The purpose of this study is to derive construction engineering tasks on temporary work at the design phase of the high-rise building projects. 27 preliminary tasks were firstly investigated through literature review and experts' group interview, and the necessity and importance analysis of each tasks were then performed based on questionnaire survey. Most of the tasks related to plans on structural framework and lifting equipment were analyzed as relatively more important ones. Lastly, 21 engineering tasks, which are classified into 5 factors, were proposed through factor analysis. The factors were determined as 1) structural framework, measurement and circulation, 2) lifting equipment and pumping, 3) space zoning, 4) water supply, 5) temporary facility, electric power supply and lighting. The results of this study can be used as basic data for establishing efficient work process of construction engineering on temporary work at the design phase.

A Study on Optimal Inspection Interval for the Major Components of Construction Lift (건설용 리프트의 운행정보 및 고장데이터 분석을 통한 주요 부품별 점검주기 산출 연구)

  • Soh, Jiyune;Bae, Jaehoon;Han, Choonghee;Lee, Junbok
    • Korean Journal of Construction Engineering and Management
    • /
    • v.16 no.3
    • /
    • pp.68-77
    • /
    • 2015
  • One of recent concerns for super-tall buildings is how to manage hoisting plans and equipment efficiently. Disasters are frequently occurred in relation to electromotive hoists and cranes which are commonly used in construction sites. For construction lifts, particularly, it is highly important to conduct regular inspections or prepare against breakdown in terms of safety. However, unfortunately the reality is that regular inspections are only flatly conducted according to operating hours only. A lift, whose life span is subject to the complicated considerations such as operating hours, loading condition, and the like of each component, is far too invalid as a means of maintenance. As a way to resolve this problem and improve its convenience and safety for users, this study intends to calculate individual inspection interval for the main components of lifts by measuring their actual operating hours with sensing technology and analyzing their historical data. The findings of study include calculation of inspection intervals for the main components of lifts and classification of components to check by the actual operating hours of lift (40, 90, 130, 400 hours), which are drawn up into tables. This will make an opportunity to suggest efficient maintenance measures by enabling prevention of safety accidents and enhancement of safety for workers. Also, it will lead to increasing productivity of works by eliminating sources of delaying the term due to the breakdown of lifts.

Fungal flora of paddy field in Korea IV. Filamentous fungi isolated by heat treatment (한국(韓國) 논토양중(土壤中)의 균류(菌類)에 관(關)한 연구(硏究) IV. 열처리(熱處理)로 분리(分離)한 사상균류(絲狀菌類))

  • Min, Kyung-Hee;Ito, Tadayoshi;Yokoyama, Tatsuo
    • The Korean Journal of Mycology
    • /
    • v.15 no.3
    • /
    • pp.187-195
    • /
    • 1987
  • Two kinds of heat treatment method for the selective isolation of soil fungi to eliminate the commonest fungi and also to examine the vertical and seasonal distributions of the fungal population were applied to soil samples from two plots around Seoul area. The incubation method at $42^{\circ}C$ and heat treatment at $70^{\circ}C$ were used in this experiment. In the incubation method, the almost all the fungi isolated from two plots were mesophile, while the thermotolerant fungi was Aspergillus fumigatus and thermophilic fungi were Sporotrichum thermophile and Malbranchea pulchella var. sulfrea. The most dominant species isolated by this method was A. fumigatus. Nine genera and fourteen species were isolated from the two plots, and S. thermophile, Talaromyces ucrainicus,Malbranchea pulchella var. sulfrea were new to Korea. From the selection method by heat treatment at $70^{\circ}C$, ten genera and twenty species were isolated. Among these, the most fungi were also mesophile and thermotolerant fungus was A. fumigatus. The most dominant species isolated by this method was T. stipitatus, Talaromyces helicus var. major, Emericella nidulans var. nidulans, Chaetomium subspirale and Neosartorya fisheri var. fisheri were new to Korea. From the two isolation methods, it was found that the total number of soil fungi and frequency of species appeared including dominant ones were the highest at the soils of upper layer while the lowest at the soils of lower layer in its vertical distribution.

  • PDF

On the Harzadous Components of Paper Mill Sludge and Sludge Treated Soil (제지(製紙)슬러지와 슬러지 시용토양중(施用土壤中)의 유해성분(有害性分)에 관하여)

  • Lee, Kyu Seung;Choi, Jong Woo;Jo, Jeong Rye;Kim, Moon Kyu
    • Korean Journal of Agricultural Science
    • /
    • v.19 no.2
    • /
    • pp.194-200
    • /
    • 1992
  • In order to use organic resource like a compost 44 samples of paper mill sludge were collected from each paper manufacturer. Some metal and PCBs(polychlorinated biphenyls) contents in/on sludge were investigated and metal contents of soil treated with kraft and paper board sludge were checked in contrast io the non-treated soil. The staple results were the same as followings. 1. Average contents of Pb in sludge ranged 14.5-25.7 ppm, and Al, Cd, Cu, Fe, Zn were similar concentration to unpolluted soil. Also, Cr and Hg were not detected from any sludge sample. 2. PCBs contents in sludge of kraft, paper board and news print paper were determined. Less than 10 ppb of $PCB_s$ contents were detected from kraft and paper board sludges, but a little more was found in sludge of news print paper. 3. Some metal contents in sludge treated soil were much similar to non-treated soil and the concentration also were ranged under the average of unpolluted natural soil. 4. From these results paper mill sludge seemed to be no harmful effects to soil.

  • PDF

Studies on Phytotoxin in Intensively Cultivated Upland Crops -II. Population and identification of soil microorganisms in rhizosphere of upland crops (연작재배지토양(連作栽培地土壤)의 식물독소(植物毒素)에 관(關)한 연구(硏究) -제(第) II 보(報). 작물근권토양(作物根圈土壤)의 미생물분포(微生物分布)에 관(關)한 연구(硏究))

  • Lee, Sang-Kyu;Suh, Jang-Sun;Kim, Young-Sig;Park, Jun-Kyu
    • Korean Journal of Soil Science and Fertilizer
    • /
    • v.20 no.2
    • /
    • pp.179-183
    • /
    • 1987
  • A series of laboratory experiments were conducted to find out the populations and identification of soil bacteria, fungi and their B/F ratio in the rhizosphere of intensively cultivatad hot-pepper, garlic, flower plants, chinese cabbage, and round onion. The results obtained are summarized as follows: 1. The number of bacteria, fungi and their B/F ratio are remarkably lower than that of normal paddy soils. 2. Nitrate reducers and bacteria which utilized simple sugars for their sole carbon source are predominated in the rhizosphere of intensively cultivated upland crops. 3. Alkaligenetic bacteria predominate in rhizosphere of garlic and tomato cultivated upland soils. 4. Genera of Pseudomonas, Xanthomonas, Bacillus, Arthrobacter, and Achromobacterium are the most common species in the rhizosphere of intensively cultivated upland crops and flower plants. 5. Phytotoxin producers such as Stachybotris sp. were identified in all rhizospheres of intensively cultivated upland crops and flower plants. 6. Most common and highest population of soil fungi were obtained for the genera of Penicillium, Humicola, Phoma and Aspergillus in the rhizosphere of intensively cultivated upland crops and flower plants.

  • PDF

The influence with buddhist music appearing in PanYeombul out of Ogu exorcism of East coast - focused on the song by Kim Janggil - (동해안 오구굿 중 판염불에 나타난 불교음악의 영향 - 김장길의 소리를 중심으로 -)

  • Seo, Jeong-mae
    • (The) Research of the performance art and culture
    • /
    • no.34
    • /
    • pp.277-313
    • /
    • 2017
  • This study is to find out the correlation with buddhist music after analyzing the rhythm of six pieces of PanYeombul sung by Kim Janggil out of Ogu exorcism of East coast the findings summarized are as follows. First, PanYeombul by Kim Janggil, performed on Oct, 16, 2016, was composed of , , , , , , , , , , and . Still, even if PanYeombul is performed by the same male shaman, the composition can be added or left out depending on some circumstances, which means the procedures are flexible. Seeing that there is common component of in additoin to compared with Kimyongtaek, it can be said that the component of is an important part in PanYeombul of Ogu exorcism of East coast Second, is usually referred to 'SinmyojangguDaedalani' in buddhist ritual, While Kim yongtaek accepts this practice in title, Kim Janggil uses 'YeomhwajangguDaedalani' as the title which makes his song different from others. Yeomhwa means "picking up flowers with fingers" which has been used in buddhism, not in common Considering this fact, the conclusion can be reached that by using the term 'Daedalani' from a buddhist chant, but making differentiation from buddhism, Kim Janggil is making the effort to be different from buddhist rituals. give some unique meaning to shaman rituals. Third, PanYeombul of Ogu exorcism of East coast may be divided into two main parts - the former part is PanYeombul and the latter part is Jiokga. In performing PanYeombul, male shaman sits singing alone and playing Jing himself, on the other hand, in case of Jiokga, he stands singing a solo with gwaeggwari in his hand accompanied by other musicians with the rhythm of Samgongjaebi. As the song and the accompaniment are in the form of giving and taking like duet. it is in peak in terms of music. Accordingly, PanYeombul can be divided into PanYeombul and Jiokga, But since it is performed by one male shaman and sung a solo, it is usually seen as one procedure. Jing, which is a kind of accompaniment in PanYeombul by Kim Janggil, has the role to distinguish a phrase and settle the musical paragraph. When the buddhist chant with one word-one note is performed. it requires the performer to catch his or her breath or clear throat. Just then, Jing comes out for filling out the intervals. Also, its role to distinguish a phrase and settle the musical paragraph helps make it clear to deliver words. The rhythm of Jing is mostly made up of small triple time except equal small binary time, comes out with overwhelmingly more frequency of Sutsoe(♪♩) than Amsoe(♩♪), and often shows syncopation. By often using Off Beat or short-long rhythm even in accompaniment of equal small binary time, he tris to give some variation to monotonous and equal rhythm for the musical vitality. These are similar to Sutsoe rhythm which can evoke tension and Kim Janggil makes these things his characierisiic of rhythm. Fifth, all the pieces consist of mi, sol, la, do, re and the descending melody like do'${\searrow}$la${\searrow}$sol${\searrow}$mi appears most frequently. The descending melody usually arouses the feeling of sorrow, so the sadness for the deceased is presented properly, which suggests his musical talent. Generally, pieces take on Menari-tori as a whole where the length of sol appears for a short time in descending la${\searrow}$sol${\searrow}$mi of perfect four degrees. Sixth, Even he accepts the lines of buddhist chant, he changes them in some degree. For example, he inserted some words between lines like 'Wonwangsaeng' and 'NamuAmitabul' and added Korean words like hapsosa to the lines of buddhist service written in Chinese character. Also, he inserted some words like 'iiiiiii~' to express the feeling of sadness. These are to maximize the desire of the deceased to go to the heaven and at the same time to diminish the sign of buddhism and strengthen the features of shamanism. Seventh, the effort to decrease the sign of buddhism is made in pasting lines of two songs. For example, Between the last words 'Wonsuaenapsu of Dage and the first words 'Jisimgwimyeongrye' of Chiljeongrye, there is usually a short pause to distinguish paragraphs, But he continues two songs without any pause to get rid of the feelings of buddhist chant. In terms of melody, he makes a distance from buddhist chant in an effort that he gives some traits to shaman rituals which are different from buddhist even if he uses the lines of buddhist rituals. Eighth, the analyzed pieces can be in four categories - no regular melody , , equal small binary time , eotmori melody of ten eighth time with 3+2+3+2 mixed small time . and Samgongjaebi melody 3+2+3 mixed small time . Each piece has its unique melody. Although of buddhist ritual is often performed, by using eotmori melody, he evokes the feeling of shaman and is another example of giving unique characteristic to the shaman of East coast by using Samgongjaebi melody.

Evaluation of Electrolyte and Electrode Spacing for Application of Electrokinetic Remediation (전기동력학적 정화기술 적용을 위한 최적의 전해질 선택 및 전극간의 거리 평가)

  • Park, Geun-Yong;Kim, Woo-Seung;Kim, Do-Hyung;Yang, Jung-Seok;Baek, Kitae
    • Journal of Soil and Groundwater Environment
    • /
    • v.18 no.1
    • /
    • pp.6-15
    • /
    • 2013
  • The influence of processing fluids and electrode spacing on the electrokinetic process was evaluated to remediate As-, Cu-, Pb-contaminated soil. Single and mixture of sodium citrate, EDTA and NaOH was used to investigate the metal extraction. EDTA for washing reagent showed the highest removal efficiency. Based on the extraction result, the electrode spacing (20, 40, 60 cm) on the electrokinetic process was investigated to remove the multi-metals from soil. The highest removal was observed at the experiment with 60 cm of electrode spacing, however, the correlation between electrode spacing and removal of metals was not clear. The electrode spacing influenced the amount of accumulated electro-osmotic flow. BCR sequential extraction showed that electrokinetic process removed the fractionation of metals bound to Fe-Mn oxyhydroxide.