• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2003년도 춘계학술대회 논문집 초전도 자성체 연구회
• /
• pp.73-76
• /
• 2003

Phase transformation of Bi-2223 tape during the final heat treatment has been investigated through the various duration time of heat treatment in a specially designed 3-step heat treatment. It was found that the phase assemblage in the sintering was determined by the sintering time and temperature. In this study, sintering time was changed to optimize the Bi-2223 phase assemblage, and acquire high critical current density. High critical current samples with Ic = 85 A and Je = 8.9 kA/$cm^2$ have been measured at 77K and self-field for 55-filament tapes sintered by optimum condition.

• 한국응급구조학회지
• /
• 제20권2호
• /
• pp.113-125
• /
• 2016

Purpose: The purpose of this study was to investigate factors influencing severity of occupational fall injury. Methods: A self-reported questionnaire was completed by 105 patients sustaining occupational fall injury between July 2010 and January 2013. The study instruments were developed by the National Traumatic Occupational Fatalities and National Electronic Injury Surveillance System. The questionnaire consisted of general characteristics of the subjects (30 items), workplace characteristics (12 items) and disaster characteristic (13 items). Results: Demographic factors, except age, did not affect the severity of injury. Injured patients aged 50-59 years tended to have more severe injuries than those aged 39 years. Type of transport vehicles, conditions, and the circumstances of the fall influenced injury severity. Patients transported by 119 ambulance suffered more severe fall injuries than those who were not. Electrical workers did not receive safety education wihin a year. Critical height in severe injuries was > 6 meters. Conclusion: Occupational fall injuries were influenced by patient age, types of transport vehicles, fall height, size of workplace, and safety education experience.

• 한국응급구조학회지
• /
• 제21권1호
• /
• pp.99-109
• /
• 2017

Purpose: There is no recommended bag-squeezing technique for emergency medical providers to maintain correct tidal volume during mechanical ventilation. This study compared the tidal volume of two different bag-squeezing techniques during mechanical ventilation. Methods: The subjects were 38 paramedic students who were trained in airway management techniques. Two different bag-squeezing techniques were used with a bag valve mask on an intubated manikin: a conventional technique and a finger-marked, in which the bag is squeezed until the thumb and the middle finger come into contact. Hand size and grip strength were measured and analyzed statistically. Results: The mean tidal volumes for the finger-marked were significantly higher than those for the conventional technique ($542.6{\pm}35.92mL$ versus $338.0{\pm}111.15 mL$, p<.001). There was a correlation between the two techniques (Pearson $x^2=1.160$, p<.001). The subject's characteristics, including sex, hand size, and grip strength, showed no correlation with tidal volume. Conclusion: A finger-marked bag-squeezing technique provides adequate and correct tidal volumes during mechanical ventilation.

• 센서학회지
• /
• 제19권4호
• /
• pp.259-270
• /
• 2010

MEMS(micro electro mechanical systems) is a technology for the manufacture hyperfine structure, as a micro-sensor and a driving device, by a variety of materials such as silicon and polymer. Many study for utilizing the MEMS applications have been performed in variety of fields, such as light devices, high frequency equipments, bio-technology, energy applications and other applications. Especially, the field of Bio-MEMS related with bio-technology is very attractive, because it have the potential technology for the miniaturization of the medical diagnosis system. Bio-MEMS, the compound word formed from the words 'Bio-technology' and 'MEMS', is hyperfine devices to analyze biological signals in vitro or in vivo. It is extending the range of its application area, by combination with nano-technology(NT), Information Technology(IT). The LOC(lab-on-a-chip) in Bio-MEMS, the comprehensive measurement system combined with Micro fluidic systems, bio-sensors and bio-materials, is the representative technology for the miniaturization of the medical diagnosis system. Therefore, many researchers around the world are performing research on this area. In this paper, the application, development and market trends of Bio-MEMS are investigated.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2007년도 하계학술대회 논문집 Vol.8
• /
• pp.236-237
• /
• 2007

Lamination of coated conductor is important to commercialize for electrical stabilizer and mechanical support. It should be known the properties of soldering interface and the variation of superconductivity on coated conductor with various kinds of solders. $SmBa_2Cu_O_x$ thin films were deposited by co-evaporation method (EDDC, Evaporation using Drum in Dual Chambers). 4 kinds of solders were used to investigate interface properties of SmBCO conductors. In-Bi solder could maintain good connection.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2005년도 하계학술대회 논문집 Vol.6
• /
• pp.268-269
• /
• 2005

YBCO 박막형 초전도체(coated conductor) 제조를 위해서는 여러 층의 완충층이 필요하다. 현재 일반적인 완충층의 구조는 seed layer로써 $Y_2O_3$, diffusion barrier로 YSZ, capping layer로 $CeO_2$가 사용되고 있다. 특히, capping layer로 $CeO_2$는 YBCO와 lattice mismatch가 매우 우수한 산화물로 이용되고 있다 본 연구에서는 $CeO_2$ capping layer가 증착 방법에 따라 그 위에 증착되어지는 초전도층의 특성에 어떤 영향을 미치는지 연구하였다. $CeO_2$를 thermal evaporation과 PLD (pulsed laser deposition) 증착 방법으로 증착 한 후 그 위에 PLD 방법으로 YBCO를 증착하여 coated conductor의 성능을 평가하였다.

• 한국유기농업학회지
• /
• 제26권1호
• /
• pp.43-56
• /
• 2018

The objectives of this study are to analyze life satisfaction between agricultural and non-agricultural households using 1~4th KReIS (Korean retirement and income study) data, to investigate whether to affect on life satisfaction according to the employment industry of householder. and to examine various determinants of life satisfaction between agricultural and non-agricultural households. The summary of analysis results is as follows. First, life satisfaction is influenced by economic value. Also it is examined that both physical and mental health have a significant effect for life satisfaction. Especially, it is analyzed that the effect of mental health is larger than one of physical health for life satisfaction. In addition, it is investigated that life satisfaction of single-person households is higher than two or more person households. Second, there was significant difference between agricultural and non-agricultural households in life satisfaction. It was proved that life satisfaction of agricultural households is higher than non-agricultural ones. As a result, it is confirmed that life satisfaction is influenced by industrial characteristic and mental health rather than another determinants.

• 수산해양기술연구
• /
• 제31권3호
• /
• pp.264-271
• /
• 1995

제어전용 마이크로 프로세서와 PC간에, 본 연구에서 제안하는 이중 포트 램을 이용한 병렬처리 방식으로 하드웨어를 설계 제작하고, 제어응답실험을 행한 결과 기존의 범용 A/D & D/AC 카드로 수행하기 어려웠던 2개 이상의 제어 대상을 제어하고 모니터링 하는 작업을 원활히 수행할 수 있음을 확인하였다

• 수산해양기술연구
• /
• 제25권1호
• /
• pp.29-34
• /
• 1989

이상과 같은 제어계의 구성방법으로 제어계를 설계할 경우에는 오차신호에 대한 PI제어기와 플란트의 상태피이드백을 아울러 행하는 제어계로 됨을 알 수 있으며, 또한 응답 시뮬레이션 결과로부터 알 수 있듯이 본 연구에서 제안하는 방법으로 제어기를 구성할 경우 양호한 제어가 가능하다. Fig.3의 플로우챠트의 그림에서 점선으로 표시된 실시간제어실험의 프로그램은 구성은 되어 있으나 실제로 실험을 행하지 못한 아쉬움이 있으며, 다음 기회에 이 부분의 실험도 행하고자 한다.

• 한국융합학회논문지
• /
• 제10권3호
• /
• pp.149-155
• /
• 2019

본 연구에서는 실시간 통신 기술을 적용한 온라인 수업 토론 활동의 중층적 구조와 역동적 전개 양상을 개념적 수준에서 분석하였다. 문화역사적 활동이론에 근거하여 온라인상에서의 개별 발화를 활동체제의 산물로 간주하였으며, Alderfer의 욕구 위계이론을 주체의 동기와 의도를 분석하는 틀로 활용하였다. 온라인 수업 토론은 전체로서 하나의 활동체제로 작동하며, 특별히 활동 주체들의 욕구에 따라 기본 방향과 성격이 규정된다. 주체의 존재, 관계, 성장의 욕구에 따라 이들의 수업 토론 활동은 물리/생물적 차원, 문화/제도적 차원, 사회/관계적 차원, 협력적 지식 구성의 차원으로 규정된다. 이는 개별 활동 체제 안에 중층적으로 존재하며, 각자의 관심과 처지에 따라 배열이 달라지고, 동시에 활동체제 간의 협력과 갈등의 요인으로 작용한다. 이를 통해 집단적 토론 활동은 복잡하고 역동적으로 발전한다.