• Proceedings of the Korean Information Science Society Conference
• /
• 1998.10c
• /
• pp.647-649
• /
• 1998

본 논문에서는 다각 근사화 방법과 래스터 기반 연산 알고리즘을 이용하여 평면 지도상에 나타난 등고선을 3차원 가시화(Visualization)하여 보여준다. 다각 근사화 방법은 입력한 등고선에 대한 특징을 반영할 수 있는 최소한의 선형구분 오차 임계값을 이용하여 등고선에 근사화 시킨 것으로 저장 데이터의 양을 축소할 수 있다. 래스터 기반 알고리즘은 이웃한 두 개의 등고선 내부점의 높이 값을 그 점에서 두 등고선까지의 최단거리 및 등고선의 높이값을 변수로 하는 선형보간식으로 정의하고, 거리변환 연산을 도입하여 계산하는 알고리즘으로 구현이 용이하며, 간단한 계산만을 수행하기 때문에 처리 방법이 간단하다는 장점을 갖는다. 본 논문에서는 래스터 방법만을 이용한 복원보다 자료의 양이 감소함을 보였고, 전체 처리과정의 간단함과, 3차원 가시화된 등고선을 그래프 좌표상의 X, Y, Z축으로 원하는 각도만큼씩 회전시키며 관찰 할 수 있도록 하였다. 본 연구를 통해 지형의 특징을 원형 등고선과 유사하게 유지하면서, 데이터 양을 축소하고 계산식을 간략화된 효과적인 지형정보 시각화를 보여주었다.

• Journal of the Korea Society of Computer and Information
• /
• v.17 no.2
• /
• pp.59-67
• /
• 2012

In this paper, an efficient interpolation scheme using gradient information between adjacent pixel values was proposed to estimate the value of interpolated pixel to have the locality which exists in real image and the characteristic of simple convex surface and simple concave surface which exist partially in the real image. PSNR(Peak Signal to Noise Ratio) was used to evaluate the performance of the proposed scheme. The PSNR values of the magnified images using the proposed scheme are greater than those of the magnified images using the previous interpolation schemes.

• Journal of IKEEE
• /
• v.27 no.3
• /
• pp.296-302
• /
• 2023

As Multimedia industry has evolved, it has become possible to display resolutions in various formats. Therefore, the performance of a scaler algorithm that converts resolutions while maintaining high quality and its hardware implementation are important. Considering the hardware design of an image up/down scaler, this paper proposes a combinatorial scaler algorithm that uses modified bilinear interpolation in the vertical direction and bicubic interpolation in the horizontal direction to reduce the line memory burden. Through quantitative and qualitative evaluations, this paper compared the performance of the proposed algorithm with three other well-known algorithms, and also compared the hardware burden of its hardware implementation. This paper used a sinusoidal signal and eight typical images for performance evaluation.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.14 no.7
• /
• pp.1551-1556
• /
• 2010

In this paper, we propose a new inspection method that applies fuzzy reasoning method considering the difference of brightness and intensity of illumination by bend together. In the preprocessing phase, we compensate the degree of semiconductor images with bilinear interpolation and moment-rotation. Then we use fuzzy reasoning method with the difference of brightness from error region by pattern matching and the difference of intensity of illumination from bends. Then the result is difuzzified and applied to the final inspection process. In experiment which uses 30 real world semiconductors with strait shots and side shots, the proposed method successfully discard the false positive identified by conventional brightness comparison only method without any loss of misidentification.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.29 no.6C
• /
• pp.777-784
• /
• 2004

In this paper, a new filter structure to improve frequency response characteristics in decimation filter using CIC(Cascaded Integrator-Comb) filters and half band filters is proposed. Conventional filters improve only passband characteristics, but we propose a new filter which can improve stop band and pass band characteristics simultaneously. Since proposed filter needs only two multiplication, additional implementation cost is not much. And overall linear phase characteristics are maintained since the proposed filter is also linear phase. Finally, filter coefficients quantization effects ate discussed after Verilog-HDL coding.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2022.11a
• /
• pp.85-87
• /
• 2022

최근 CCTV 출입 기록, 휴대폰 보안, 스마트 매장 등에서 얼굴 인식을 통해 개인을 식별하는 기술이 널리 사용되고 있다. 카메라의 각도, 조명, 사람의 움직임 등 얼굴 인식에 많은 외부 환경이 영향을 미치고 있지만 그중에서도 실제 영상에서 얼굴이 차지하는 영역이 작아 저해상도 얼굴 인식에 어려움을 겪고 있다. 이러한 문제점을 해결하고자 본 논문에서는 이미지 해상도가 얼굴 인식에 끼치는 영향을 알아보고 이미지 초해상화를 통해 얼굴 인식 성능을 개선하고자 한다. 쌍선형, 양3차 회선 보간법과 딥러닝 기반의 이미지 초해상화 모델인 RCAN을 이용하여 업스케일링한 데이터셋에 대해 학습한 ArcFace를 통해 얼굴 검증 평가를 진행하였다. 고해상도 이미지는 얼굴 인식 성능을 향상시키며, RCAN을 사용한 이미지 초해상화가 보간법을 사용한 방법보다 더 좋은 성능을 보였다.

• The Journal of the Korea Contents Association
• /
• v.16 no.7
• /
• pp.431-438
• /
• 2016

In this paper, we present an upsampling technique for depth map image using color and depth weights. First, we construct a high-resolution image using the bilinear interpolation technique. Next, we detect a common edge region using RGB color space, HSV color space, and depth image. If an interpolated pixel belongs to the common edge region, we calculate weighting values of color and depth in $3{\times}3$ neighboring pixels and compute the cost value to determine the boundary pixel value. Finally, the pixel value having minimum cost is determined as the pixel value of the high-resolution depth image. Simulation results show that the proposed algorithm achieves good performance in terns of PSNR comparison and subjective visual quality.

• Journal of the Korea Society of Computer and Information
• /
• v.18 no.2
• /
• pp.49-57
• /
• 2013

To improve the quality of magnified image, two schemes were proposed. The one is used to estimate simple convex surface and simple concave surface using the information of adjacent pixel values, and the other scheme is used to produce magnified image using the characteristics of simple convex surface and simple concave surface. The magnified image using the proposed scheme is more similar to real image than the magnified image using the previous schemes. The PSNR values of the magnified images using the proposed scheme are greater than those of the magnified images using the previous interpolation schemes.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.10 no.12
• /
• pp.2343-2348
• /
• 2006

Image magnification is among the basic image processing operations. The most commonly used technique for image magnification are based on interpolation method(such as nearest neighbor, bilinear and cubic interpolation). However, the magnified images produced by the techniques that often appear a variety of undesirable image artifacts such as 'blocking' and 'blurring' or too takes the processing time into the several processing for image magnification. In this paper, we propose image magnification method which uses input image's sub-band information such as edge information to enhance the image magnification method. We use the whole image and not use the one's neighborhood pixels to detect the edge information of the image that isn't occurred the blocking phenomenon. And then we emphasized edge information to remove the blurring phenomenon which incited of edge information. Our method, which improves the performance of the traditional image magnification methods in the processing time, is presented. Experiment results show that the proposed method solves the drawbacks of the image magnification such as blocking and blurring phenomenon, and has a higher PSNR and Correlation than the traditional methods.

• Proceedings of the Korean Institute of Intelligent Systems Conference
• /
• 2002.05a
• /
• pp.289-292
• /
• 2002

2계 선형 상미분방정식의 경계치 문제는 보통 해를 구하고자 하는 구간의 양 끝점에서 도함수의 값을 임의로 선정한 후 각 점에서 초기치 문제의 해를 구한 다음 적절한 1차 결합을 이용하여 구하게 된다. 이 경우 초기값과 도함수 값을 사용한 반복연산이 수반되며 따라서 오차의 누적이 불가피 하게 된다. 이 논문에서는 이같은 오차의 누적을 피할 뿐 아니라 3차 Spline 함수를 사용함으로써 오차가 O( $h^2$)인 해를 구하는 방법에 대하여 기술한다 두 개의 경계조건과 근사값을 구하고자 하는 점에서의 함수 값을 "If x is $B_{i}$, then f is $C_{i}$"와 같은 Fuzzy Rule들로 변형하고 주어진 미분방정식을 상수 $C_{i}$들의 관계식으로 변형하여 해를 구하였다. 산출된 결과로부터의 보간 연산은 Fuzzy System사용에 의하여 대체되었다. 이상의 방법으로 산출한 해의 근사오차가 O( $h^2$).임을 증명하였으며 3개의 예제에 대한 계산결과를 4계 Runge-Kutta 방법에 의한 해와 비교하여 기술하였다였다였다였다