• Journal of the Korea Institute of Building Construction
• /
• v.18 no.4
• /
• pp.363-373
• /
• 2018

Evacuation facilities are installed so that people can evacuate high-rise apartment houses when it is impossible to escape fire through the front door. The households of apartment houses may escape the building in two ways, which will reduce loss of lives. This study examined the characteristics of two-way evacuation facilities, including a light-weight partition wall, shelter space at the balcony and horizontally-installed indoor emergency exit. Then, it proposed a horizontally-installed outdoor emergency exit that improved the problems of the examined facility types, and analyzed its economic-feasibility. When a horizontally-installed emergency exit instead of a traditional type to escape from fire is used, people may be more autonomous in deciding whether active evacuation is possible or not. Thus, the time required to evacuate the building with 4 different evacuation methods using the stairs and horizontally-installed emergency exit was simulated in consideration of the impact of evacuation methods that people choose on the time required for evacuation using pathfinder. Then, the simulation results were compared and analyzed. Any appropriate evacuation method to reduce the time required for evacuation was predicted, analyzed and decided. As a result of this study, it was analyzed that the high - rise apartment top - down type evacuation zone can shorten the total evacuation time compared to the staircase type.

• Korean Journal of Optics and Photonics
• /
• v.10 no.6
• /
• pp.500-506
• /
• 1999

We designed and fabricated a bidirectional optical transceiver module for low cost access network. An integrated chip forming a pin-PD on an 1.3 urn FP-LD was assembled by flip-chip bonding on a Si optical bench, a single mode fiber with an angled end facet was aligned passively with the integrated chip on V-groove of Si-optical bench. Gaussian beam theory was applied to evaluate the coupling coefficients as a function of some parameters such as alignment distance, angle of fiber end facet, vertical alignment error. The theory is also used to search the bottle-neck between transmittance and receiving coupling efficiency in the bi-directional optical system. Tn this paper, we confirmed that reduction of coupling efficiency by the vertical alignment error between laser beam and fiber core axis can be compensated by controlling the fiber facet angle. In the fabrication of sub-module, a'||'&'||' we made such that the fiber facet have a corn shape with an angled facet only core part, the reflection of transmitted laser beam from the fiber facet could be minimized below -35 dE in alignment distance of 2: 30 /J.m. In the same condition, transmitted output power of -12.1 dEm and responsivity of 0.2. AIW were obtained.

• The Journal of Bigdata
• /
• v.3 no.2
• /
• pp.79-85
• /
• 2018

As the utilization of chatbots grows and the AI market grows, many companies are interested. And everybody is spurring growth by offering chatbot build services so that they can create chatbots. This makes chatbots easier to service on the messenger platform, which is changing the existing application market. In this paper, we present a methodology for designing and implementing existing DB-based applications as instant messenger platform-based applications, and summarize what to consider in actual implementation to provide an optimal system structure. According to this methodology, we design and implement a chatbot that serves as an teaching advisor who provides information to the students in the curriculum. The implemented application objectively visualizes the user's desired information from the user's point of view and delivers it through the interactive interface quickly and intuitively. By implementing these services and real service, it is predicted that DB-based information providing applications will be implemented as chatbots and will be changed to bi-directional communication through an interactive interface. it is predicted that DB-based information providing applications will be implemented as chatbots and will be changed to bi-directional communication through an interactive interface. Enterprise legacy application will take chatbot technology as one of important digital transformation initiative.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2023.05a
• /
• pp.13-13
• /
• 2023

디지털 기술은 오늘날 플랫폼과 디지털 트윈의 기술도입을 통해 현실 세계를 네트워크와 가상세계와의 연결이 통합되어진 가상 현실 세계의 입문 도약이다. 현실에서 가상현실의 사이의 디지털 전환(digital transformation)에는 디지털 기술과 솔루션을 비즈니스의 모든 영역에 통합하는 것이 포함된다. 이러한 디지털 전환의 핵심은 데이터에 관한 것이며, 데이터를 활용하여 가치를 창출하고 고객경험과 비즈니스 영역을 극대화하는 방식을 제공한다. 최적의 데이터를 제공하기 위한 플랫폼과 가상 현실세계 구현을 위한 디지털 트윈의 상호연계 관한 기본 개념은 데이터 수집, 데이터 분석, 데이터 시각화 및 데이터 보고와 같은 데이터 비즈니스이다. 현장 데이터는 디지털 양식을 통해 수집, 기록, 저장된다. 현장 IoT 기반 데이터(사진 및 비디오 매체 등)는 지속적으로 수집되고 종종 다른 데이터베이스에 저장되지만 지리 공간적 위치에 연결되지 않는다. 모든 디지털 발전을 조화시키고 지하수 데이터에서 더 빠른 이해를 도출하기 위해서는 디지털 트윈이 시작되어야 한다. 단일 지하수플랫폼에서 현장 조건을 시각화하고 실시간 데이터를 스트리밍하며, 과거 3D 데이터와 상호작용하여지질 또는 지화학 데이터를 선택적 사용을 위해 지하수 플랫폼과 디지털 트윈이 연계되어야 한다. 데이터를 디지털 정보모델과 연결하면 디지털 트윈에 생명을 불어넣을 수 있지만 디지털 트윈의 가치를 극대화하려면 여전히 데이터 플랫폼 서비스와 전달 방식을 선택해야 한다. 지하수 플랫폼동시성을 갖는 디지털 트윈은 정적 및 동적 데이터를 저장하는 데이터베이스 또는 크라우드 서비스에서 데이터를 가져오는 API(애플리케이션 프로그래밍 인터레이스), 디지털 트윈을 위한 호스팅 공간, 디지털 대상을 구축하는 소프트웨어, 구성 요소 간 읽기/쓰기를 위한 스크립트, chatGPT 및 API를 활용할 수 있다. 이를 통해 수집된 데이터의 실시간 양방향 통신기술인 지하수 플랫폼 기술을 활용하여 디지털 트윈을 적용하고 완성할 수 있고, 이를 지하수 분야에도 그대로 적용할 수 있다. 지하수 분야의 디지털 트윈 기술의 근간은 지하수 모니터링을 위한 관측장치와 이를 활용한 지하수 플랫폼의 구축 및 양방향 자료전송을 통한 분석 및 예측기술이다. 특히 낙동강과 같이 유역면적이 넓고 유역 내 지자체가 많아 이해관계가 다양하며, 가뭄과 홍수/태풍 등 기후위기에 따른 극한 기상이변가 자주 발생하고, 또한 보 및 하굿둑 개방 등 정부정책 이행에 따른 민원이 다수 발생하는 지역의 경우 하천과 유역에 대한 지하수 플랫폼과 디지털 트윈의 동시성 기술적용 시 지하수 데이터에 대한 고려가 반드시 수반되어야 한다.

• Journal of Energy Engineering
• /
• v.26 no.4
• /
• pp.29-34
• /
• 2017

Factors of Zero-Energy Building are divided into active and passive factor. Passive factor means insulation, heat bridge of building like insulation, windows and doors, awning, outside etc. and active factor means energy output and efficiency coefficient. Energy output of active factor is achieved by new generating energy. This study anticipated how many effects will be produced when not new generating energy but Vehicle to Building; V2B, bi-directional charging and discharging technology, is applied to Zero-Energy Building. In new generating energy, power generation will be anticipated by geography and climate, but in V2B, several input variable like user's discharging intention and number of usable charger etc. should be considered. We can check how much V2B contribute to the Zero-Energy Building by anticipated results, and that results should be anticipated by using probabilitic method because there is few statistical data. This study anticipate change of charging and discharging pattern, based by Demand Response slot, by using monte carlo method among the probabilitic methods.

• Journal of the Korean Wood Science and Technology
• /
• v.29 no.1
• /
• pp.22-30
• /
• 2001

Composites with various layer constructions involving the ratio of S/P were produced from wood strands(S) and particles(P) (Cryptomeria japonica D.Don) to measure various Young's moduli and anisotropy by ultrasonics. As a result, static Young's moduli of composites were almost same as dynamic Young's moduli obtained from natural frequency. However, these were smaller than those evaluated from ultrasonic wave propagation velocity. The differences between propagation velocity of the parallel(${\parallel}$) and perpendicular(${\bot}$) in-plane direction resulted in a tendency of anisotropy. The tendency of anisotropy was larger in three-layer constructions than in seven-layer constructions. The differences of strand surface layers showed larger values than those of particle surface layers. Also, composites with higher weight ratio of strand had a tendency to propagate rapidly in each direction. In contrast to these results, the propagation velocity in the thickness direction had a tendency to propagate rapidly in composites with particle surface layers and the lower weight ratio of strand.

• Journal of Broadcast Engineering
• /
• v.12 no.5
• /
• pp.435-444
• /
• 2007

In this paper, we presented the concept and some methods to watch online video clips related to a TV program on atelevision which is called lean-back media, and we simulated our concept on a PC system. The key point of this research is suggesting a new service model to TV viewers and the TV industry, which the model provides simple and easy ways to watch online video clips on a TV screen. The paper defined new tags for metadata and algorithm for the model, then showed simple example using those metadata. At the end, it mentioned the usage of the model in the digital broadcasting environment and discuss about the issues which should handle as future works.

• Proceedings of the Korea Technology Innovation Society Conference
• /
• 2001.11a
• /
• pp.37-57
• /
• 2001

Digital technology enhanced the improvement of technological aspects in the both broadcasting and telecommunications industries. The infrastructures of each industry converged to one, which impacts not only on technology but also on the broadcasting service. The current broadcasting service is characterized by one-way service, but it'll changed to be customized, or two-way service that reflects the interest of customers. This change requires a new standard to categorize and analyze the future broadcasting service converged and market structure, differing from the present standard based on the transmission channels. This study aims at forecasting the demand of interactive TV service as a representative broadcasting service in the near future, and analyzing the market structure of the broadcasting services. We assume that the present broadcasting and information and telecommunications services such as terrestrial, cable TV, satellite, digital TV services and high-speed broadband service have strong relationship with interactive TV service. First we use Bass diffusion method to predict the diffusion curve of the present five services. Then we analyze the relationship between the present services and interactive TV service by Delphi method. Finally we estimate the potential subscription number of interactive TV service based on the relationship among the services and diffusion parameters.

• Journal of Broadcast Engineering
• /
• v.15 no.4
• /
• pp.498-512
• /
• 2010

Intra coding is an indispensable coding tool since it can provide random accessibility as well as error resiliency. However, it is the problem that intra coding has relatively low coding efficiency compared with inter coding in the area of video coding. Even though H.264/AVC has significantly improved the intra coding performance compared with previous video standards, H.264/AVC encoder complexity is significantly increased, which is not suitable for low bit rate interactive services. In this paper, a Voting-based Intra Mode Bit Skip (V-IMBS) scheme is proposed to improve coding efficiency as well as to reduce encoding time complexity using decoder-side prediction. In case that the decoder can determine the same prediction mode as what is chosen by the encoder, the encoder does not send that intra prediction mode; otherwise, the conventional H.264/AVC intra coding is performed. Simulation results reveal a performance increase up to 4.44% overall rate savings and 0.24 dB in peak signal-to-noise ratio while the frame encoding speed of proposed method is about 42.8% better than that of H.264/AVC.

• Journal of KIISE:Computer Systems and Theory
• /
• v.33 no.10
• /
• pp.709-721
• /
• 2006

The traditional broadcasting services over terrestrial, satellite and cable media have been unidirectional mass media regardless of TV viewer's preferences. Recently ich media streaming has become possible via the broadb and networks. Furthermore, since bidirectional communication is possible, personalcasting such as personalized streaming services has been emerging by taking into account the user's preference on content genres, viewing times and actors/actresses etc. Accordingly, personal media becomes an important means for content provision service in addition to the traditional broadcasting service as mass media. In this paper, we introduce a user profile reasoning method for target advertisement which is considered an important application in personalcasting service. The proposed user profile reasoning method predicts an unknown TV viewer's gender and ages by analyzing TV Viewing history data. Based on the estimated user's gender and ages, a target advertisement is provided with TV Anytime metadata. A proposed target advertisement system is developed based on the user profile reasoning and the target advertisement selection method. To show the effectiveness of our proposed methods, we present a plenty of experimental results by using realistic TV viewing history data.