• Title/Summary/Keyword: 양마섬유

Search Result 13, Processing Time 0.021 seconds

A Study on the Mechanical Properties of Fiber Reinforced Concrete by Kenaf Dosages (양마의 혼입량에 따른 섬유보강 콘크리트의 역학적 특성에 관한 연구)

  • Kwon, Yeong-Ho;Jun, Woo-Chul
    • Journal of the Korean Recycled Construction Resources Institute
    • /
    • v.2 no.1
    • /
    • pp.19-25
    • /
    • 2014
  • The purpose of this study is to establish experimentally the mechanical properties of fiber reinforced concrete using kenaf dosages and propose the usable method of kenaf fiber in the concrete industry as natural fiber materials. Kenaf fiber help make the concrete strength including tensile and flexural stronger, more resistant to plastic and drying shrinkage, less amount of carbon dioxide because of having a rough surface and excellent tensile strength of fiber and improving the concrete's corrosion resistance. It is to select the kenaf dosages of 4 cases (0, 0.3, 0.6 and $0.9kg/m^3$ and perform various tests including slump, air content, plastic and drying shrinkage, flexural and tensile strength for fiber reinforced concrete. The results of this study are as follows : In case of increasing kenaf fiber dosages, show the slump decrease and air content increase, also take effect results for increasing concrete strength including flexural and tensile, decreasing plastic and drying shrinkage. therefore, considered test results and cost, the optimum dosages of kenaf fiber is proposed about $0.6kg/m^3$ and need to study on the site application considering concrete quality and another compared tests.

An Experimental Study on the Engineering Properties of Fiber Reinforced Concrete using Kenaf Fibers (양마섬유를 혼입한 콘크리트의 공학적 특성에 관한 실험적 연구)

  • Kwon, Yeong-Ho;Jun, Woo-Chul
    • Journal of the Korea Institute of Building Construction
    • /
    • v.16 no.3
    • /
    • pp.201-209
    • /
    • 2016
  • This study is to examine experimentally on the engineering properties of fiber reinforced concrete using kenaf(KN) fiber and another organic fibers for comparing test, and propose the usable method of KN fiber as an natural fiber in the concrete industry. It is to select 4 contents(0, 0.3, 0.6 and $0.9kg/m^3$) of KN fiber and 4 organic fibers (Jute, Cellulose, Polypropylene and Nylon). For this study, it is to perform various tests including slump, air content, plastic and drying shrinkage, flexural and tensile strength, carbonation depth for the fiber reinforced concrete according to contents of KN fiber and 4 organic fibers. The results of this study are as follows : In case of KN fiber contents $0.6kg/m^3$, it shows the effective results from increasing concrete strength including flexural and tensile, from decreasing plastic and drying shrinkage, carbonation depth. Also KN fiber is confirmed having excellent performances by comparing with test results of another organic fibers as same contents $0.6kg/m^3$. Therefore, considering concrete test results, cost and environment, KN fiber is proposed as the optimum contents in the range of $0.6kg/m^3$ and an effective fiber materials, and needs to keep up these study on the site application.

Optical Property of Chermimechanical Pulp Sheet from Fast-Growing Kenaf (Kenaf 반화학펄프로부터 제조한 종이의 광학적 특성)

  • Guo-Min Tan;Nam-Seok Cho
    • Journal of Korea Technical Association of The Pulp and Paper Industry
    • /
    • v.29 no.2
    • /
    • pp.25-35
    • /
    • 1997
  • 오늘날 열대림 면적의 급격한 감소, 지구온난화등 지구환경 보전의 관점에서 이들 목재이외의 자원의 활용 및 양마와 같은 새로운 비목재자원 개발의 중요성이 재인식되기에 이르렀으며, 이 가운데서 양마는 생장이 라르고 수확량이 크며, 목질부의 단섬유는 물론 긴 섬유장을 가진 인피부섬유로 구성되어 있고, 실리카함량도 매우 적어, 특히 산림자원이 부족한 개발도상국에서 펄프.제지용 자원으로서 주목되고 있다. 양마가펄프.제지용자원으로서 오늘날과 같은 세계적 주목을 받게 된 것은 미국 농무성 북부지역연구센타 에서 이루어진 “새로운 섬유작물”에 관한 기초연구에서 양마가 제지용 섬유작물로서 높이 평가되고 있다. 양마의 경우 인피부는 비교적 리그닌함량이 적고, 목질부는 활엽수재에 가까운 리그닌을 함유하고 있는데다, 섬유형태에 있어서도 인피부와 목질부간에 큰 차이가 발견된다. 본 연구에서는 양마를 중성아황산법으로 전처리하여 제조한 반화학펄프로 부터 제조한 종이의 광학적 성질을 검토하였다 펄프의 광학적 성질은 원료의 화학적 조성,섬유의 형태, 부위.화학적 처리정도, 원료의 저장기간 및 충전제의 첨가에 따라 크게 영향을 받았다. 장섬유와 낮은 리그닌함량을 가진 전간부 펄프시트는 불투명도가 낮았으며, 목질부 펄프로부터 상대적으로 밀도가 다소 높고, 불투명도도 높은 종이를 만들 수 있었다. 펄프원료의 저장기간이 백색도를 낮추었으며, 불투명도에는 그다지 영향하지 않았다. 약품전처리 및 표백이 백색도 및 불투명도에 크게 영향하였고, 특히 충전제 첨가로 광산란을 증가시켜 불투명도가 높은 종이를 제조할 수 있었다.6. CL종의 난황콜레스테롤 수준에 대한 계란의 일령 상호간에는 전체적으로 상호간에 차이가 없었다. 7. 26주령시 혈중콜레스테롤 수준은 CL종이 다른 두 육계종들 보다 유의적 (P$\leq$0.05)으로 높았다. 8. 성별간 혈중콜레스테롤 수준의 차이는 CL종, BR1 및 BR2 중에서 CL종에서만 나타났으며, 수컷은 암킷보다 혈액 100 mL당 약 90 mg이 낮았다.구체적인 생화학적인 연구가 이루어져야 될 것으로 여겨진다.야 할 것으로 사료된다. 냉장 저장을 하고 저장기간이 길어질 경우는 냉동저장을 사용하는 것이 바람직하다고 생각된다.S, FOS나 말티톨로 대체된 스폰지 케익은 설탕 100% 사용한 케익과 비교하여 크게 나쁘지 않거나 휠씬 나은 특성을 보이므로 스폰지 케익 제조에 그들의 이용이 가능함을 확인하였다.thione 같은 다른 항산화제의 절약 효과, CYP2El의 유도 저하를 통하는 것으로 생각되며 그중 어떤 것에 가장 큰 영향을 받는 지는 아직 알려지지 않았고 더욱 많은 연구가 요구된다.우와 사료에 $\omega$3계 지방산 급원을 첨가, 동물에게 이행시켜 $\omega$3계 지방산 강화식품을 제조하는 두 가지 방법이 있을 수 있는데 전자는 통조림, 과자, 건강보조식품류에 다용되며 후자는 다양한 기능성 축산식품에 활용되고 있다. $\omega$3계 지방산 강화 축산식품에는 돼지고기, 우유, 치이즈, 계란, 분유, 햄 등 다양한 제품에 활용, 개발되고 있으며 최근에는 이러한 식품 개발에 더욱 박차가

  • PDF

Anatomical Characteristics of Kenaf Grown in Reclaimed Land - Volumetric Composition and Cell Dimension - (간척지에서 재배된 양마(kenaf)의 해부학적 특성(II) - 구성 비율 및 세포의 치수 -)

  • Lee, Seon-Hwa;Kwon, Sung-Min;Um, Gi Jeung;Kim, Nam-Hun
    • Journal of the Korean Wood Science and Technology
    • /
    • v.36 no.4
    • /
    • pp.11-18
    • /
    • 2008
  • Anatomical characteristics of volumetric composition, fiber length, vessel diameter, and crystalline properties of cellulose in kenaf (Hibiscus cannabinus L.) planted in the reclaimed land of Buan-si, Korea were examined to understand the growth characteristics using a light microscopy and an X-ray diffraction method. The samples of kenaf were taken from six positions (3 cm, 35 cm, 70 cm, 105 cm, 280 cm, and 320 cm) of each stem over the growth period (July, August, September, and October) after seeding in the mid-May. In the kenaf stem, phloem constituted 10 to 15 %, xylem 66 to 82%, and pith 7 to 19%. The ray, bast fiber, and remainder comprised 50%, 20%, and 30% of the phloem, respectively. The volume of vessel, ray, and fiber in the xylem was approximately 10, 15, and 75%, respectively. The proportion of cell wall was 30.92% at the base of stem and 46.40% at the top of stem, respectively. The average length of bast fiber and xylem fiber was about 2.8 mm and 0.9 mm, respectively. Radial and tangential diameters of vessel increased with the increase of growth period, while they decreased with increasing the stem height. Relative crystallinity ranged from 70 to 79% in phloem and from 50 to 56% in xylem. Cellulose crystallite width was about 3 nm both in the phloem and xylem. Thus, the volumetric composition and cell dimensions in the phloem and xylem appeared to be varied with the growth period and the stem height.

Studies on the Relining Method of Kenaf bark and Manufacture if bag using KENAF(Hibiscus Cannabinus. L) Produced in KOREA (한국산 양마 섬유의 정련방법과 마대가공에 관한 연구)

  • 이성갑
    • Journal of the Korean Professional Engineers Association
    • /
    • v.10 no.3
    • /
    • pp.17-26
    • /
    • 1977
  • In order to obtain the most practical and economically efficient method for refining of kenaf fiber and the production possibility of bag dproucts by using kenaf, Various chemicals and conditions of treatment for refining of kenaf bark were examined. Refining by the retting method was found much beneficial in quality of fiber and in processing cost than the chemical mettled. Bag products by using kenaf bark has good quality , and for practical use, Even if the production cost is slightly more expensive than jute bag, it could be reduced by planned mass production.

  • PDF

Effect of Seeding Date on Forage Yield and Chemical Composition of Kenaf in Jeju (제주지역에서 파종기에 따른 양마의 사료수량 및 조성분 변화)

  • 조남기;송창길;조영일;고지병
    • KOREAN JOURNAL OF CROP SCIENCE
    • /
    • v.46 no.6
    • /
    • pp.439-442
    • /
    • 2001
  • This study has been conducted from April 25, 1999 to June 25, 1999 in Jeju Province in order to determine the influence of seeding date on growth, yield and chemical composition of Kenaf (Hibiscus cannabinus L.) Delaying the seeding date from April 25 to June 25 decreased the plant height of Kenaf from 278.5 cm to 205.7 cm. As for the number of leaves, number of withering leaves, number of branches, and stem diameter decreased as the seeding date was delayed. As the seeding date was delayed, fresh forage yield decreased from 98.5MT/㏊ to 45.9MT/㏊, dry matter yield from 20.7MT/㏊ to 8.2MT/㏊, crude protein (CP) yield from 2.9MT/ha to 1.3MT/ha and total digestible nutrients (TDN) yield form 1l.6MT/㏊ to 5MT/㏊. However, both leaf yield and stem yield were nearly the same tendency. Delaying the seeding date from April 25 to June 25 increased crude protein contents of leaves from 21.5% to 24.4%, crude fat contents from 5.2% to 6.1%, nitrogen free extract (NFE) contents form 39.9% to 41.2% and TDN contents from 64.3% to 69.7%. However, delaying seeding date decreased crude fiber contents from 20.8% to 17.5%, and crude ash contents from 7.9% to 7.0%. Based on the these findings, optimum seeding date for forage production of Kenaf seems to be about 25 April in atmospheric phenomena and volcanic ash soils of Jeju island.

  • PDF

Anatomical Characteristics of Kenaf Grown in Reclaimed Land(I)-Differences in Phloem and Xylem with Growth Period and Height- (간척지에서 재배된 양마(Kenaf)의 해부학적 특성(I)-사부와 목부의 생장기관과 높이에 따른 차이-)

  • Lee, Seon-Hwa;Lee, Se-na;Kwon, Sung-Min;Lee, Myoung-Ku;Cho, Dong-Ha;Kim, Nam-Hun
    • Journal of the Korean Wood Science and Technology
    • /
    • v.35 no.6
    • /
    • pp.43-49
    • /
    • 2007
  • Anatomical properties of Kenaf (Hibiscus cannabinus L.) planted in a reclaimed-land of Korea were examined to understand the growth characteristics by an optical and scanning electron microscopy. The samples of kenaf were taken from four positions of the stem (3, 35, 70, 105 cm above from the ground) in four growth periods (July. August, September, October) from seeding planted in the middle of May. Bast fiber, phloem rays, cortex parenchyma cells and sieve tube members were observed in phloem, and vessel elements, fibers and rays in xylem. Solitary and multiple radial pores existed in xylem. The cell types of ray parenchyma in radial section were procumbent, upright, and square. The intervascular pitting showed an alternate type. Xylem proportion, the number of bast fibers and dimension of phloem rays increased with increasing growth period, and decreased with increasing stem height. The proportion of multiseriate rays was higher than that of uniseriate and biseriate rays in xylem with increasing growth period. On the other hand, The proportion of multiseriate rays was lower than that of uniseriate and biseriate rays in xylem with increasing stem height.

Effects of Split Nitrogen Application on Agronomic Characteristics, Forage Yield, and Chemical Composition of Kenaf in Jeju (제주지역에서 질소분시 횟수에 따른 양마의 생육특성, 사료수량 및 조성분 변화)

  • 조남기;강영길;송창길;조영일;정재수;고미라;오은경
    • Journal of The Korean Society of Grassland and Forage Science
    • /
    • v.22 no.1
    • /
    • pp.9-14
    • /
    • 2002
  • Evegradies 71' kenaf (Hibiscus cannabinus L.) was grown at 160,000 plants per ha in a volcanic ash soil in Jeju island to determine the optimum frequency of split N application fer forage production. Nitrogen fertilizer was applied with 240 kg/ha, and frequencies of the split N applications were 1, 2, 3, 4 and 5 times. Plant height averaged across two harvests increased from 187 to 201cm as N was split-applied from one to three applications and then decreased to 201cm in five applications. This pattern held for the number of branches and leaves per plant stem diameter and weight of plant per plant. Fresh forage yield increased from 91.8 to 114.2 MT/ha. dry matter yield from 12.70 to 16.6 MT/ha, crude protein yield from 1.75 to 2.48MT/ha, and total digestible nutrients (TDN) yield from 5.39 to 7.63 MT/ha as N was split-applied from one to four applications, and then decreased to 106.6, 15.0, 2.32, and 7.22 MT/ha in five applications, respectively As N was split-applied from one to five applications, crude protein content increased from 13.8 to 15.4%. ether extract content from 4.1 to 5.9%, and TDN content from 42.4 to 48.1%. but crude fiber decreased from 38.2 to 37.1% and crude ash content from 11.5 to 8.6%. Nitrogen free extract content was about 19.0% regardless of cutting height.

Studies on the Breeding of the Response to short photoperiod, Fiber weight, and Qualitative characters and of the Associations Among these characters in Kenaf (섬유용양마의 육종에 관한 연구 -단일반응성과 섬유종의 유전 및 연소)

  • Johng-Moon Park
    • KOREAN JOURNAL OF CROP SCIENCE
    • /
    • v.4 no.1
    • /
    • pp.115-124
    • /
    • 1968
  • It was shown that the most desirable characters for kenaf are high-fiber weight and moderately early maturity. Therefore, the objectives of this research on this crop is to find varieties possessing these characteristics. The experiments covered in this report provided new information relative to segregation, mode of inheritance, estimate of the number of genes involved in fiber weight and their response to short day length of 10 hours and the qualitative characters, such as, color of stem, capsule, petiole and shape of leaves. The associations which exist among these characters are also indicated. Fiber weight per plant, days to flowering, Stem color, Petiole color, Capsule color, and shape of leaves were studied in parental, $F_1$.$F_2$and backcross populations of a cross between Dashkent, a low-fiber weight but early maturing kenaf variety, and G 38 F-1, a high-fiber weight but late maturing kenaf variety. Crosses were made using the varieties, Dashkent and G 38 F-1 as parents. The Dashkent parent had the following characteristics: green stems, capsules and petioles and lobed shaped leaves; 105.8234 mean-days to flowering in the field, and 106.9222 mean-days under 10 hours short day treatment. The other parent, G 38 F-1 had red stems yellow capsules and red petioles and unlobed shaped leaves; 149.8921 mean-days to flowering in the field, and 62.3684 mean-days under 10 hours short day treatment. Both of the parents, $F_1$, $F_2$, $BC_1$ ($F_1$ X Dashkent, ) and $BC_2$($F_1$ ${\times}$ G38F-1) of the kenaf cross were grown at the Crops Experiment Station, Suwon, Korea in 1965. Color of stems, petioles and capsules, and shape of leaves were noted to be simply inherited as a single factor. Red stem color was dominant over green stem color, red petiole color was dominant over green petiole, lobed shaped leaves were dominant over unlobed shaped leaves and yellow capsules were dominant over green capsule. It was, also, noted that the factor for color of petiole was linked with the factor for shape of leaf with a 11.9587 percent recombination value, however no interaction or linkage were found among the color of stem and capsule color. Using Powers partitioning method, theoretical means and frequency distributions for each population, the days to flowering were calculated with the assumption that two gene pairs were involved. The values obtained fitted the theoretical values. In general this would indicate that Dashkent and G 38 F -1 were differentiated by two gene pairs. Heritability values were calculated as the percent of additive genetic variance. Heritability value of days to flowering, 89.5% in the broad sense and 79.91% in the narrow sense, indicated that the selection for this character would be effective in relatively early generations. Particularly, high positive correlations were found between days to flowering and the color of petioles and shape of leaves. However, there was no relation between days to flowering and capsule color nor between these and stem color. On the basis of the results of this experiment there is evidence that the hereditary factor for shape of leaves and the color of petioles is linked with an effective factor or factors for the characters of days to flowering. The association was sufficiently close to offer a possible simple and efficient means of selection for moderately early mat. uring plants by leaf shape and petiole color selection. Again using Powers partitioning method the frequency distribution for each population to the fiber weight were calculated with the assumption that two gene pairs, AaBb, were involved. Both phenotypic and genotypic dominance were complete. The obtained value did not agree with the theoretical value for $F_2$ and $BC_1$ ($F_1$ ${\times}$ Dashkent.) It seems that Dashkent and G 38 F-1 were differentiated by two major gene pairs but some the other minor genes are necessary. It is certain that the hereditary factor for shape of leaves and color of petioles is linked with an effective factor or factors for fiber weight. Also, high. yielding plants with moderately early maturity were found in the $F_2$ population. Thus, simultaneous selection for high-fiber yield and moderately early maturing plants should be possible in these populations. Phenotypic and genotypic correlation coefficients between fiber weight per plant and days to flowering, stem height and stem diameter were calculated. In general, genotypic correlations are higher than the phenotypic correlation. The highest correlation is found between stem height and fiber weight per plant (0.7852 in genotypic and 0.4103 in phenotypic) and between days to flowering and fiber weight per plant (0.7398 in genotypic and 0.3983 in phenotypic.) It was also expected that the selection of high stem height and moderately early maturing plants were given the efficient means of selection for high fiber weight.

  • PDF

Hanji Manufacturing from Bast Fibers of Kenaf, Hibiscus cannabinus (양마의 인피섬유를 이용한 한지제조)

  • Cho, Nam-Seok
    • Journal of Korea Technical Association of The Pulp and Paper Industry
    • /
    • v.40 no.4
    • /
    • pp.1-9
    • /
    • 2008
  • The utilization of non-woody fibers with the fast growing annual plants has occurred in the paper industry to replace wood and preserve environment of the earth. The non-woody fibers generally used for papermaking are paper mulberry, gampi, manila hemp, rice straw, bamboo, and coton linter etc.. Recently Kenaf has been spot-lighted for the same application. Kenaf is an annual plant of Hibiscus species of Malvaceae family. Kenaf, a rapid growing and high harvesting non-woody fiber plant, was identified as one of the promising fiber sources for the production of paper pulp. This study was carried out to investigate the pulping characteristics of Kenaf bast fiber for Hanji (traditional Korean paper) manufacturing by different pulping methods, such as alkali, alkali-peroxide and sulfomethylated pulpings. It was possible to make superior grade of Hanji. Especially sulfomethylated pulping was resulted in superior pulp in terms of higher yields and qualities in comparison to those of the other pulping methods. Hanji from sulfomethylated pulp was shown the highest brightness of over 60% and higher sheet strength. In addition, the morphological features of pulp fibers (pulp compositions) affect to the sheet properties. Therefore the effect of fiber distribution index(FDI) which was calculated from the data of Confocal laser scanning microscopy(CLSM) on the sheet properties of Kenaf Hanji was also discussed.