• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2011.04a
• /
• pp.353-356
• /
• 2011

본 논문에서는 원자력발전소의 부속건물인 냉각탑에 대한 추계론적 해석을 수행하였다. 냉각탑 구조는 원자력발전소의 냉각시스템 부속건물로서 그 규모가 매우 큰 반면 쉘의 두께가 매우 얇아 바람하중에 취약한 구조로서 주로 철근콘크리트로 건설된다. 냉각작용은 냉각탑의 하부에 유입된 외부공기에 의한 대류현상에 의하며 냉각에 필요한 시설은 냉각탑 하부에 위치한다. 이 구조는 형태적 및 재료적 특성에 따라 형상과 재료에서 공간적인 형상불완전과 재료적 불확실성을 가지며, 이들 불확실성은 구조의 응답에 영향을 미친다. 이들 인수의 불확실성을 추계장으로 가정하고 이들 사이의 상관관계를 고려하여 응답에 미치는 영향을 평가하고자 하였다. 해석에는 4절점 층상쉘요소를 사용하였고, 몬테카를로 해석을 적용하였다.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.13 no.4
• /
• pp.449-459
• /
• 2000

The original Mindlin-type degenerated shell element perform reasonably well for moderately thick shell structures. However, when full integration for analysis of thin shell is used to evaluate the stiffness matrix, the stiffness of shell element is often over-estimated due to shear or membrane locking phenomena. To correct this problem, the formulation of the new degenerated shell element is derived by the combination of two different techniques. The first type of elements(TypeⅠ) has used assumed shear strains in the natural coordinate system to overcome the shear locking problem, the reduced integration technique in in-plane strains(membrane strains) to avoid membrane locking behaviour. Another element(TypeⅡ) has applied the assumed strains to both of membrane strain and transverse shear strains. The improved degenerated shell element has been tested by several numerical problems of shell structures. Numerical results indicate that this shell element shows fast convergence and reliable solutions.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.26 no.3A
• /
• pp.447-455
• /
• 2006

A general purpose of 4-node co-rotational resultant shell element is developed for the solution of nonlinear problems of reinforced concrete, steel and fiber-reinforced composite structures. The formulation of the geometrical stiffness presented here is defined on the mid-surface by using the second order kinematic relations and is efficient for analyzing thick plates and shells by incorporating bending moment and transverse shear resultant forces. The present element is free of shear locking behavior by using the ANS (Assumed Natural Strain) method such that the element performs very well as thin shells. Inelastic behaviour of concrete material is based on the plasticity with strain hardening and elasto-plastic fracture model. The plasticity of steel is based on Von-Mises Yield and Ivanov Yield criteria with strain hardening. The transverse shear stiffness of laminate composite is defined by an equilibrium approach instead of using the shear correction factor. The proposed formulation is computationally efficient and versitile for most civil engineering application and the test results showed good agreement.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.16 no.4
• /
• pp.419-429
• /
• 2003

A three-dimensional (3-D) method of analysis is presented for determining the free vibration frequencies of thick, hyperboloidal shells of revolution. Unlike conventional shell theories, which are mathematically two-dimensional (2-D), the present method is based upon the 3-D dynamic equations of elasticity. Displacement components u/sub r/, u/sub θ/, u/sub z/ in the radial, circumferential, and axial directions, respectively, we taken to be sinusoidal in time, periodic in θ, and algebraic polynomials in the r and z directions. Potential(strain) and kinetic energies of the hyperboloidal shells are formulated, and the Ritz method is used to solve the eigenvalue problem, thus yielding upper bound values of the frequencies by minimizing the frequencies. As the degree of the polynomials is increased, frequencies converge to the exact values. Convergence to four digit exactitude is demonstrated for the first five frequencies of the hyperboloidal shells of revolution. Numerical results are tabulated for eighteen configurations of completely free hyperboloidal shells of revolution having two different shell thickness ratios, three variant axis ratios, and three types of shell height ratios. Poisson's ratio (ν) is fixed at 0.3. Comparisons we made among the frequencies for these hyperboloidal shells and ones which ate cylindrical or nearly cylindrical( small meridional curvature. ) The method is applicable to thin hyperboloidal shells, as well as thick and very thick ones.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.28 no.1
• /
• pp.53-61
• /
• 2015

This paper presented the nonlinear behaviors of the single-layered lattice dome, which is widely used for the long-span structure system. The behaviors were analysed through the classical shell buckling theory as the single-layered lattice dome behaves like continum thin shell due to its geometric characteristics, and finite element analysis method using the software program Nastran. Shell buckling theory provides two types of buckling loads, the global- and member buckling, and finite element analysis provides the ultimate load of geometric nonlinear analysis as well as the buckling load of Eigen value solution. Two types of models for the lattice dome were analysed, that is rigid- and pin-jointed structure. Buckling load using the shell buckling theory for each type of lattice dome, governed by the minimum value of global buckling or member buckling load, resulted better estimation than the buckling load with Eigen value analysis. And it is useful to predict the buckling pattern, that is global buckling or member buckling.

• Korean Chemical Engineering Research
• /
• v.60 no.1
• /
• pp.139-144
• /
• 2022

This study reports a microfluidic approach to produce monodisperse hydrogel microparticles in a simple and highly efficient manner. Specifically, we produce double emulsion drops with a thin oil shell surrounding an aqueous prepolymer solution, which is solidified via UV-induced free radical polymerization. When they are dispersed in an aqueous solution, the oil shell is dewetted due to the absence of surfactants, resulting in production of highly uniform hydrogel microparticles (C.V.=1%). Results show that production of monodisperse hydrogel microparticles with controllable size and composition can be achieved with minimal use of oil unlike water-in-oil (w/o) single emulsion-based approach. Furthermore, in-depth study of flow patterns in microfluidic device using a phase diagram exhibits a crucial relationship among relative flow rates while providing windows of readily controllable parameters for reliable manufacturing of hydrogel microparticles.

• Journal of the Korea Society of Computer and Information
• /
• v.28 no.12
• /
• pp.89-96
• /
• 2023

In this paper, we propose a GPU-based method for real-time processing of dynamic re-meshing required for tearing cloth. Thin shell materials are used in various fields such as physics-based simulation/animation, games, and virtual reality. Tearing the fabric requires dynamically updating the geometry and connectivity, making the process complex and computationally intensive. This process needs to be fast, especially when dealing with interactive content. Most methods perform re-meshing through low-resolution simulations to maintain real-time, or rely on an already segmented pattern, which is not considered dynamic re-meshing, and the quality of the torn pattern is low. In this paper, we propose a new GPU-optimized dynamic re-meshing algorithm that enables real-time processing of high-resolution fabric tears. The method proposed in this paper can be used for virtual surgical simulation and physics-based modeling in games and virtual environments that require real-time, as it allows dynamic re-meshing rather than pre-split meshes.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.43 no.8
• /
• pp.699-705
• /
• 2015

Aircraft needs high lift-to-drag ratio and weight reduction of the structure for long endurance flight with a small power. Generally high aspect ratio wing is applied to HALE(High Altitude Long Endurance) aircraft. Also high modulus, and high strength CFRP(Carbon Fiber Reinforced Plastic) has been used in primary structures. and thin mylar(membrane material) film has been applied to skin of wing. As a result, wing is more flexible than the other structures. and the stiffness of thin mylar film has an affect on dynamic stability. In this study, the membrane characteristic of mylar film has been simulated using nonlinear gap elements. And equivalent modeling method using shell elements is presented using the nonlinear simulation result. The linear equivalent model has verified using the results of nonlinear membrane method. Proposed linear equivalent shell model has applied to mode analysis for estimate the effect of mylar mechanical properties on natural frequency.

• Journal of the Korea Computer Graphics Society
• /
• v.12 no.1
• /
• pp.21-25
• /
• 2006

This paper proposes a real-time simulation technique for thin shells undergoing large deformation. Thin shells are almost two-dimensional structures visually well approximated as surfaces, such as leaves, paper sheets, hats, aluminum cans. Unfortunately accurate simulation of these structures requires one of the most complex formulations in continuum mechanics, shell theory [4]. Moreover, there has not yet been any work reported to produce visually convincing animation of them while achieving real-time performance. Motivated by discrete shells [5] and modal warping [3], we formulate dynamics of thin shells using mass-spring models instead of finite element models, and then apply the modal warping technique to cope with large rotational deformation of thin shells. Experiments show that the proposed technique runs in real-time, and that it can simulate large bending and/or twisting deformations with acceptable realism.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.25 no.6
• /
• pp.477-485
• /
• 2012

Geometric configurations such as hull shape, wall thickness, stiffener layout, and type of construction materials are the key factors influencing the structural performance of pressure hulls. Traditional theoretical approach provides quick and acceptable solutions for the design of pressure hulls within specific geometric configuration and material. In this paper, alternative approaches that can be used to obtain optimal geometric shape, wall thickness, construction material configuration and stiffener layout of a pressure hull are presented. CAE(Computer Aided Engineering) based design optimization tools are utilized in order to obtain the required structural responses and optimal design parameters. Optimal elliptical meridional profile is determined for a cylindrical pressure hull design using metamodel-based optimization technique implemented in a fully-integrated parametric modeler-CAE platform in ANSYS. While the optimal composite laminate layup and the design of ring stiffener for a thin-walled pressure hull are obtained using gradient-based optimization method in OptiStruct. It is noted that the proposed alternative approaches are potentially effective for pressure hull design.