• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.1 no.1
• /
• pp.8-14
• /
• 1989

A mathematical model for computing the bed friction of combined wave-current flow has been developed based on the Prandtl's mixing length theory. Using various approximate expressions, solutions are obtained explicitly. The computational results are compared and found in reasonable agreements with the data of field measurements.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.5 no.3
• /
• pp.212-220
• /
• 1993

A numerical model for the transformation of irregular waves in a coastal area is developed, which takes account of shoaling, refraction, diffraction, bottom friction and wave breaking. The governing equations are the usual energy conservation equation and kinematic conservation equations, but to consider the diffraction effects additional terms are included in the usual kinematic conservation or wave number equations. A linear superposition technique is used to represent the spectral formation. and an explicit formula is developed for the estimation of friction factor of irregular waves. A breaking criterion of component waves, which is the modified form of the Kitaigorodskii saturation relation, is employed to restrict the growth of shoaling waves in very shallow waters. The model was applied to a laboratory test and satisfactory agreement was obtained between the computation and measurement.

• Journal of the Korea Concrete Institute
• /
• v.20 no.2
• /
• pp.257-267
• /
• 2008

Results of seventy-seven specimens tested by this study and previous research were collected and evaluated to propose the flexural strength and shear strength for flexural members with steel fiber concrete. For strength evaluation, structural parameters such as compressive strength, steel fiber content, tensile reinforcement ratio, and shear span to effective depth ratio are involved. The proposed equations for flexural and shear strength are regarded to give a good prediction for the strength of steel fiber reinforced composite and/or RC beams to compare with equations by previous researchers. Especially, the proposed shear strength equation in this study shows the lowest the mean value, the coefficient of variation and the error ratio among predictions by several equations. Therefore, equations for shear strength and flexure strength, which are proposed in this study are to be useful measure to predict the actual behavior and failure mode of steel fiber reinforced composite beams.

• Proceedings of the Korean Society of Environment and Ecology Conference
• /
• 2007.10a
• /
• pp.8-10
• /
• 2007

• Journal of the Earthquake Engineering Society of Korea
• /
• v.5 no.2
• /
• pp.1-11
• /
• 2001

내진성능평가 시스템은 구조시스템의 합리적인 분류, 적절한 평가 기준, 그리고 종합적인 평가방법을 포함하여야한다. 외국의 현행 내진성능 평가방법은 데이터의 수집과 주요 평가 항목을 위한 약산식 그리고 평가 점수를 이용하여 전문가의 판단에 근거한 평가 방법을 제시하고 있다. 본 연구는 국내 건축구조물에 예비 내진평가 방법에 중점을 두고 퍼지추론 시스템에 근거한 내진평가방법의 전형을 개발한다. 평가항목의 위계는 건무의 수직, 수평방향을 불규칙성, 비대칭성, 여용성, 그리고 건물 연한을 포함한 전체적인 특성과 부재 단계에서의 상세한 평가 항목으로 구성한다. 퍼지추론방법에 대한 기존의 연구결과를 근허가혀 이용한 내진성능 평가방법에 적절히 적용하기 위하여 4가지 주요 모듈을 설정한다. (1) 퍼지 입력 (2) 퍼지에 근거한 규칙기반 (3) 퍼지추론, 그리고 (4) 퍼지출력으로 구성된다. 더욱이 개별적인 성능 수준에 종합적인 평가지수를 끌어내기 위하여 퍼지추론방법을 적용하였다.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.1 no.2
• /
• pp.95-105
• /
• 1997

Iosipescu Beam은 혼합 모드의 파괴 거동에 관하여 자주 이용되고 있는 보 중에 하나이다. 이 연구의 주요 목적은 Iosipescu 보의 모드 II 파괴계수(SIF)를 수치적 실험을 통하여 결정하는데 있다. 이 특별한 연구의 목적에 맞게 강도계수를 구하기 위하여 강성도법이 유도되고, 다양한 종류의 Iosipescu 보의 분석이 이루어진다. 수치적 실험을 위해 요구되어지는 정해를 얻기 위한 기술이 논의된다. 또한 이 수치 실험을 위하여 필요로 되어지는 Mesh의 기준과 요구되어지는 정해도를 위한 수렴 테스트를 실시한다. 약 500 개의 데이터 세트가 분석되어 결과가 이용하기 쉬운 약산식으로 유도되었다.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.4 no.4
• /
• pp.27-35
• /
• 2000

강한 지진 하에서 효율적으로 거동하도록 유도하는 연구중의 하나로서 개구부를 가진 합성보의 이력거동을 조사하고 있다. 직사각형 개구부를 가진 합성보에 대한 연구를 발전시켜 에너지 소산능력이 보다 큰 달걀형 개구부를 가진 합성보에 대한 연구를 수행하였다. 실험적 연구와 비선형 FEM 해석 연구 모두가 그러한 합성보의 연성도를 입증하였다. 본 연구는 달걀형 개구부를 가진 합성보의 강도와 초기강성도를 산정하는 약산식을 제시하였고, 그 결과를 실험 및 비선형 FEM 해석의 결과와 비교 분석하였다.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.5 no.4
• /
• pp.9-16
• /
• 2001

The purpose of this study is to evaluate a seismic behavior of unreinforced masonry(URM) structure. For more efficient evaluation, quasi-dynamic analysis method is used in this study. The influence of soil-structure interaction on the seismic response of low rise structures is discussed through comparison of the computed seismic response for the structure on rigid or dense soil and that on soft soil. The results of analytical study show that the story shear forces and the base shear forces could increase on soft soil. Furthermore, it was observed that an approximate expressions prescribed in current seismic codes may underestimate the value of the base shear force of low rise buildings on soft soil.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.3 no.3
• /
• pp.55-62
• /
• 1999

For the efficient performance of steel and composite building structures subjected to strong earthquake, one of current research investigates the cyclic behavior of open-web composite beams. Both experimental test and nonlinear FEM analysis demonstrate their behavior so ductile that four T-sections around the corners of rectangular web-opening develop plastic hinges prior to potential brittle failure at the beam end, i.e. at the column face. This research proposes simplified equations for determining strength and initial stiffness of composite beams with a rectangular web-opening, and compares its results with those of experimental test and nonlinear FEM analysis.

• Solar Energy
• /
• v.18 no.3
• /
• pp.63-69
• /
• 1998

The heat conduction and the water vapour diffusion flow through heat insulators between hygroscopical moist building materials were measured by means of the plate method. It was found that the heat transport increases with a moisture motion occuring in the temperature drop. On his basis of simplified assumptions, the increase in the thermal conductivity was calculated from the rate of diffusion flow per unit area, which generally resulted in values inferior to the measured values. The Increase in the heat transport due to water vapour diffusion measured at a large-scale wall specimen was inferior to the one measured by means of the plate method by using a comparable arrangement of layers. The overall heat transfer caused by moisture motion is not a characteristic value of the material, but a property of the whole wall structure