• 제목/요약/키워드: 야드

검색결과 145건 처리시간 0.024초

컨테이너터미널의 하역시스템 장비조합에 대한 분석 (A Study on Analysis of the Equipment Combination of Stevedoring System in Port Container Terminal)

  • 양창호;최용석;하태영
    • 한국항해항만학회:학술대회논문집
    • /
    • 한국항해항만학회 2004년도 추계학술대회
    • /
    • pp.289-295
    • /
    • 2004
  • 본 연구의 목적은 컨테이너터미널의 하역시스템 장비조합을 분석하는 것이다. 일반적으로 컨테이너터미널의 생산성은 안벽에서 컨테이너크레인의 생산성에 의해 평가되고 있으나 이송차량과 야드크레인과 같은 다른 장비도 있다. 그러므로 컨테이너 터미널에서 하역시스템의 최적장비조합을 추정할 수 있는 방법이 요구된다. 다양한 시뮬레이션 실험을 수행하고 생산성 향상을 위한 장비조합을 분석한다. 사례연구의 적용으로부터 장비조합에 따른 평균대기시간비율을 사용하여 절감효과를 설명하였다.

  • PDF

판넬블록 생산관리를 위한 시뮬레이션 기반 조선생산실행시스템 개발 (Development of simulation-based ship production execution system(SPEXS) for a panel block assembly shop)

  • 이광국;김영훈
    • 한국정보통신학회논문지
    • /
    • 제15권11호
    • /
    • pp.2313-2320
    • /
    • 2011
  • 조선소에서 판넬블록 생산공정은 가장 많은 물량을 처리해야 하는 중요하고 복잡한 공정이 고, 모든 선박 및 해양구조물의 하부는 반드시 판넬블록 생산 공정을 거쳐야 하기 때문에 판넬블록 생산공정은 병목공정으로 평가된다. 공정의 생산성을 극대화하기 위해 본 논문에서는 디지털 선박생산에서 가장 중요한 기술 중의 하나인 시뮬레이션과 최적화기법을 활용하여 조선생산실행시스템(SPEXS)을 개발하였고, 판넬블록조립장 적용사례로 SPEXSPanel을 구축하여 향상된 일정계획을 수립하는 효과를 보였다. 더불어 SPEXS-Panel은 지속적인 개선을 통해 야드 생산성 향상에 도움을 줄 수 있을 것으로 기대된다.

효율적인 듀얼 사이클을 위한 터미널 운영방법 (Conatiner Terminal Operation Method for the Efficient Dual Cycle Operation)

  • 정창윤;신재영
    • 한국항해항만학회:학술대회논문집
    • /
    • 한국항해항만학회 2010년도 추계학술대회
    • /
    • pp.110-111
    • /
    • 2010
  • 최근 컨테이너 터미널의 관리자들은 안벽의 생산성을 높이기 위해서 양 적하를 동시에 할 수 있는 더블 사이클이나 듀얼 사이클을 시도하고 있다. 하지만 실제 터미널의 데이터를 이용하여 듀얼 사이클을 발생시켰을 경우 YT(Yard Tractor) 배정 방법이나, QC(Quay Crane)의 작업의 속도, 야드의 수출컨테이너 위치 등에 따라 효율성이 저하 될 수 있다. 따라서 본 논문에서는 실제 터미널에서 듀얼 사이클을 사용할 때 효율성을 더 높일 수 있는 터미널 운영방법을 제시한다.

  • PDF

항만 자동화를 위한 야드 크레인의 절대위치 측정 기법 (Method for Measuring Absolute Position of a Yard Crane for Port Automation)

  • 전태원;김경만;이홍희;김흥근;노의철
    • 전력전자학회:학술대회논문집
    • /
    • 전력전자학회 2003년도 춘계전력전자학술대회 논문집(1)
    • /
    • pp.439-445
    • /
    • 2003
  • Since 1960s. container shipping volume has increased dramatically and continuous on a trend of rapid growth, and so the number of containers handled at the port increases. In order to improve yard crane operating efficiency, the precise position measurement of the yard crane is important. This paper describes the method to measure the absolute position of yard crane using the output pulse of an encoder and infrared sensors. The crane position is calculated by counting the output pulse of an incremental encoder, which is mounted on the wheel in the crane. By the way, the wheel slippage on rail may cause some errors in crane position information obtained from encoder pulses, and the errors in the crane position information are compensated with infrared sensors. The performance of proposed method is verified on experimental results with the simulator of yard crane, the size of which is about 1/10 with the real crane.

  • PDF

자동화터미널의 ATC 운영전략 개발 (A Development on the ATC Operation Strategy of the Automated Container Terminal)

  • 김우선;남기찬
    • 한국항해항만학회지
    • /
    • 제30권3호
    • /
    • pp.235-240
    • /
    • 2006
  • 본 연구에서는 국내에 개발예정인 자동화터미널에 적용가능한 효율적인 ATC 운영로직을 개발하기 위해서 ATC 장비 운영전략을 분석하였다. 그리고, ATC의 효율적인 운영에 있어서 가장 중요한 동적운영로직을 개발하고, 단순한 할당규칙을 수립하여 시뮬레이션 실험으로 로직검증을 하였다. 실험결과 ATC 생산성 저해요인인 간섭을 최소화하는 간섭최소화전략과 능동적인 간섭회피전략이 ATC의 대기시간 및 간섭시간을 감소시키는 것으로 나타났다. 본 연구의 결과로 ATC의 운영효율성을 향상시켜서 자동화터미널의 생산성을 향상시킬 수 있을 것으로 기대된다.

항만 방사선감시기의 검색환경 분석 연구 (Variation Operating Environment Analysis of Port Radiation Monitor)

  • 김보경;김상열;박호;이지연
    • 한국항해항만학회:학술대회논문집
    • /
    • 한국항해항만학회 2017년도 추계학술대회
    • /
    • pp.54-55
    • /
    • 2017
  • 본 연구는 항만에 설치된 방사선감시기의 검색기능 극대화를 위하여 방사선감시기의 검색환경을 분석하고 물류흐름 관점에서 운영환경 개선방안 도출을 목적으로 한다. 본 연구 목적 달성을 위해 원자력안전위원회에서 제시한 방사선 위험화물의 수입 물동량 분석을 수행하여 방사선감시기 설치 타당성을 확보하였다. 문헌조사와 현장 전문가 인터뷰를 통해 항만의 방사선감시기 설치환경 및 운영에 따른 물류 장애요인을 분석하였다. 또한, 항만 내 방사선감시기 설치가 가능한 위치를 3단계(본선하역작업, 야드 이송 및 적재 작업, 게이트 반출)로 구분하여 각 위치별 장 단점을 분석하고 최적의 감시기 설치 위치를 도출하였다. 연구결과, 감시기 설치 위치 단계별 비용, 물류흐름, 관리 운영적 측면을 고려하였을 때, 게이트 반출 단계가 방사선 감시기 설치를 위한 최적위치로 적합한 것으로 확인하였다. 방사선감시기의 운영최적화 방안으로는 첫째, 반출 게이트 내부의 2차 검색부지 확보를 통해 게이트 통과 전 방사선감시기를 통한 화물 검색이 이루어질 수 있도록 해야 한다. 둘째, 화물인도지시서(Delivery Order: D/O)를 활용한 신속한 화물정보 파악을 통해 물류흐름의 방해요인을 제거 할 수 있음을 알 수 있다.

  • PDF

RFID를 이용한 터미널 운영의 효율성에 관한 연구 (A Study on The Plan of Terminal by RFID)

  • 김성수;이면수;송용석;남기찬;곽규석
    • 한국항해항만학회:학술대회논문집
    • /
    • 한국항해항만학회 2005년도 춘계학술대회 논문집
    • /
    • pp.487-492
    • /
    • 2005
  • 국내 컨테이너 터미널은 좁은 야드 면적, 컨테이너 정보의 부정확성, 늦은 정보 전송 등으로 인하여 장치장에서 컨테이너를 적재하기 위한 계획인 Yard Planning에 문제점을 안고 있다. 따라서 본 연구에서는 현재 활발한 연구가 진행 중인 RFID(Radio Frequence Identification)을 통해 차량 및 컨테이너 정보를 사전에 수집하여 이를 컨테이너 터미널의 게이트 및 장치장 활용방안을 개념적으로 제시하는데 목적이 있다.

  • PDF

신경회로망 예측제어에 의한 Transfer Crane의 ATCS 개발에 관한 연구 (A Study on Development ATCS of Transfer Crane using Neural Network Predictive Control)

  • 손동섭;이진우;이영진;이권순
    • 한국항해항만학회:학술대회논문집
    • /
    • 한국항해항만학회 2002년도 추계공동학술대회논문집
    • /
    • pp.113-119
    • /
    • 2002
  • 최근에, 자동화 크레인 제어 시스템은 빠른 속도와 신속한 수송이 요구되어 지고 있다 컨테이너 야드 내에서 크레인 시스템의 동작 동안, 스프레더에 매달린 컨테이너의 흔들림은 최소화로 되도록 크레인의 트롤리 위치와 와이어 로프 길이 제어가 필요하다. 크레인 시스템에서 자동 주행 제어 기술과 흔들림 방지 기술을 사용하여 무인 자동화 제어 시스템의 개발을 할 수 있는 핵심 기술이다. 그 결과 우리는 트랜스퍼 크레인 시스템 제어에서 자동 주행 제어를 위한 제어기를 설계하였다. 크레인 시스템을 통한 시뮬레이션 분석에서 다른 기존의 제어기들보다 우수한 제어 수행을 증명하였다.

  • PDF

보조로프를 이용한 야드크레인의 안티스웨이 시스템 (The Anti-Sway System for Yard Crane Using Auxiliary Ropes)

  • 박찬훈;박경택;김두형
    • 한국정밀공학회:학술대회논문집
    • /
    • 한국정밀공학회 2002년도 추계학술대회 논문집
    • /
    • pp.526-529
    • /
    • 2002
  • The development of automated container terminal has been a hot issue for recent years. It's very natural because it's very important how many containers, how soon, and how precisely a container terminal can treat. A crane treats a very heavy container, maybe, no less than 20∼40 tons, thus most cranes use ropes to take up and land containers. But rope causes the sway of a container and this phenomenon is not avoided. On the ground of this, in most case how much skillful a driver is may affect the productivity of a yard or quay crane. Thus many researches have been concentrated on the development of the control algorithm for a crane which may be useful and robust enough to drive a crane without any human driver. Authors of this paper also are interested in this kind of research but we have been much more interested for years in the development of a mechanical structure which may cause much less sway than the existing cranes do. In this paper, we may introduce the basic structure of the developed anti-sway system.

  • PDF

의왕ICD 철도수송 활성화 방안에 관한 연구 (A study on the promotion for rail transport in Ui-Wang ICD)

  • 조욱래;장성용
    • 한국철도학회:학술대회논문집
    • /
    • 한국철도학회 2008년도 춘계학술대회 논문집
    • /
    • pp.2359-2373
    • /
    • 2008
  • In 1991, Korean government decided to establish the Inland Container Depot for activating transportation of rail freight container and encourage the effectiveness of intermodal transport system. Therefore, the Ui-Wang ICD has been built in Kyonggi province and began to operate in 1993. However, Despite of original purpose of the Inland Container Depot, rail freight volume at public CY(Container Yard) in Ui-Wang ICD has been recorded very low. This paper deals with the promotion strategy for rail transport in Ui-Wang ICD. The relationship of conflicts between the rail-oriented transporters and road-oriented transporters in Ui-Wang ICD have been found through the TOC thinking process and some solutions are suggested. Some undesirable effects in operation of Ui-Wang ICD are listed and current reality tree(CRT) has been established and future reality tree(FRT) which includes some injections to active the rail transport in ICD has been recommended based on CRT. In order to make good solutions the situation in Busan-jin station ICD known as similar to Ui-Wang ICD has been analyzed.

  • PDF