• Title/Summary/Keyword: 액체 밀도

Search Result 226, Processing Time 0.019 seconds

Calibration Technique of Liquid Density Measurement using Magnetostriction Technology (자기 변형 기술을 이용한 액체 밀도 측정의 보정 기술)

  • Seo, Moogyo;Hong, Youngho;Choi, Inseoup
    • Journal of the Institute of Electronics and Information Engineers
    • /
    • v.51 no.8
    • /
    • pp.178-184
    • /
    • 2014
  • In this study, we develop liquid density sensor by measuring of balanced position between gravity and bouyancy, corresponding to liquid density, using distance measuring by magnetostriction technology. For improvement of accuracy of liquid density sensor system. And we derive the related equation between liquid density and moving distance of density sensor, and make the calibration method for liquid density sensor by magnetostriction technology. Using fabricated liquid density sensing system and derived equation, have measured the density of several liquids. And compare it to measuring results using Oscillating U-tube type high accuracy density meter, having 0.000001 g/cc resolution. The deviation of results between two density measuring systems was less than 0.001 g/cc.

Analysis of Evaluation Possibility of Fly Ash Fineness Using Hydrometer (Hydrometer에 의한 플라이애시의 분말도 평가 가능성 분석)

  • Song, Heung-Ho;Han, Cheon-Go
    • Journal of the Korea Institute of Building Construction
    • /
    • v.17 no.2
    • /
    • pp.119-125
    • /
    • 2017
  • Due to the processing cost, there were some reports on distribution of unrefined fly ash. Hence, in this research, the possibility of fly ash quality evaluation by measuring the density of various qualities of coal ash suspensions with hydrometer. According to the experimental results, the appropriate test conditions were determined with 1,000cc capacity mass cylinder for 1,000cc of water with 100g of fly ash. From the evaluating performance of various coal ashes, based on a good correlation between fineness and quality of the coal ashes, it was possible to evaluate the quality of coal ash by measuring different density of suspension with hydrometer. In this research conditions, the suggestable measuring time of density variation was three minute for fly ash quality related with fineness.

전해질로의 이온성 액체 응용

  • 김동범;원종옥;김훈식
    • Polymer Science and Technology
    • /
    • v.15 no.4
    • /
    • pp.449-456
    • /
    • 2004
  • 이온성 액체 (ionic liquid)는 유기 양이온과 유기 (또는 무기) 음이온으로 이루어진 화합물이다. 이온들이 작아, 서로 가깝게 packing되어 있는 일반 이온성 염 (상온에서 고체상)과는 다르게, 이온성 액체는 양이온과 음이온의 크기가 상대적으로 커서, packing이 잘 되지 않아 낮은 lattice energy를 갖고 있게 되어,$^1$ 10$0^{\circ}C$나 그 이하의 낮은 녹는점을 갖는 염이다. 녹는점, 밀도, 점도, 친수성 및 소수성 특성은 주어진 이온성 액체의 양이온과 음이온을 적절히 선택하면 얼마든지 조절할 수 있어, 이온성 액체를 des구nor solvent로 부르고 있다.(중략)

  • PDF

Theory of Surface Tension and Viscosity of Liquid (액체의 표면장력과 점도에 관한 이론)

  • Pak, Hyung-suk
    • Journal of the Korean Chemical Society
    • /
    • v.12 no.1
    • /
    • pp.18-25
    • /
    • 1968
  • 액체 분자는 고체, 천이상태 및 기체와 같은 자유도를 갖는다는 액체구조에 관한 천이상태이론을 적용하여 액체의 표면장력과 점도를 계산하여 측정 치와 좋은 일치를 얻었다. 표면장력을 계산함에 있어서 표면 각층의 밀도는 이웃 층 사이의 밀도를 주는 관계식으로부터 쉽게 얻었다. 그리고 액체가 점성 흐름을 할때 활성화된 분자는 흐르는 방향으로는 기체와 같은 자유도를 가지나, 이에 직교한 평면상에서는 천이상태 및 기체와 같은 자유도를 갖는다고 가정하였다.

  • PDF

액체 속에서의 고전압 펄스 플라즈마 발생 및 분광학적 플라즈마 특성연구

  • Park, Ji-Hun;Kim, Yong-Hui;Jeon, Su-Nam;Park, Bong-Sang;Choe, Eun-Ha
    • Proceedings of the Korean Vacuum Society Conference
    • /
    • 2013.02a
    • /
    • pp.549-549
    • /
    • 2013
  • 고전압 펄스 플라즈마를 액체 속에서 발생시켜 수소 스펙트럼의 광학적 특성을 연구하였다. 고전압 펄스 발생 장치인 막스 제네레이터는 용량이 $0.5{\mu}F$인 축전기 5개로 이루어져 있다. 각각의 축전기는 전원 장치를 이용하여 저항을 통해 병렬로 충전되며, 방전 시에는 불꽃 방전 스위치에 의해 동시에 직렬로 연결되어 고전압을 발생시킨다. 따라서, 출력 전압과 전류는 40kV, 3 kA이며 총 에너지는 약 125 J이다. 직육면체 모양의 폴리카보네이트 용기 내부의 양쪽면에는 탐침 모양의 전극이 구성되어 있으며 전극 사이에서 고전압을 가진 플라즈마가 형성된다. 실험에서 액체로는 증류수를 사용하였다. 액체 방전 시 발생하는 수소 스펙트럼을 관측하기 위해 초점거리 30 cm의 monochromator를 이용하였고, 수소 알파선의 656.3 nm와 수소 베타선의 434.1 nm를 관측하였다. 전자 밀도의 측정법으로는 Stark broadening법을 이용하여 측정하였으며, 전자 온도는 Stark profile의 상대적인 전자 밀도의 비를 이용하여 계산하였다. 전자밀도는 실험조건에서 약 $3{\times}10^{15}cm^{-3}$, 전자온도는 약 2.5 eV가 측정되었다.

  • PDF

Rapid Evaluation Method for OPC Fineness by Hydrometer and Influence of OPC Fineness on Properties of Mortar (액체밀도계법에 의한 OPC 분말도의 신속추정 및 OPC 분말도가 모르타르의 특성에 미치는 영향)

  • Han, Cheon-Goo;Kim, Young-Tae
    • Journal of the Korea Institute of Building Construction
    • /
    • v.18 no.5
    • /
    • pp.429-437
    • /
    • 2018
  • The aim of the research is to analyze a feasibility of rapid evaluation method for cement fineness by the relation analysis between density measurement using hydrometer and fineness of ordinary Portland cement. Additionally, based on the commercially available cement product, relation between a series of fundamental properties of cement mortar and fineness of cement powder was analyzed. As an experimental result, the actually measured fineness value of cement powder showed a good correlation with the fineness value obtained by hydrometer while there was poor correlation with the fineness value on specification. Especially, the density measurement in three minutes showed the closest relation with cement powder fineness, thus rapid quality evaluation of cement powder can be possible by using the regression equation obtained from the three minutes density measurement. Additionally, there was a high relation between cement powder fineness with a fundamental properties of the cement mortar such as fluidity, air content, setting time, and strength development.

Modeling for the Prediction of Liquid Food Density (액체식품의 밀도예측을 위한 모델링)

  • Choi, Yong-Hee
    • Korean Journal of Food Science and Technology
    • /
    • v.20 no.2
    • /
    • pp.133-139
    • /
    • 1988
  • For the development of a general mathermatical model to predict the density of liquid foods based on temperature and composition of each major component, the major components of liquid foods considered in this study were water, protein, fat, carbohydrate, fiber and ash. These samples were subdivided into sixteen pure components. The density of each sample was measured by a volumetric pycnometer at the temperature range of $0^{\circ}C\;to\;100^{\circ}C$ for three different solid content suspensions, The density values of pure component solids were calculated from the assumed model at given temperature, using the experimental values of three different solid content suspensions with known water fraction and density model of water. Using these calculated density data at the temperature range of $0^{\circ}C\;to\;100^{\circ}C$, the coefficients of ther density model for each pure component were determined by the OPT Subroutine Program. The density model developed in this study can be used to predict the density values of liquid foods at given temperature and composition.

  • PDF

A novel time scale of dynamic heterogeneity in a supercooled liquid system

  • Mun, Seok-Jin;Park, Gye-Hyeon;Park, Sang-Won;Jeong, Yeon-Jun
    • Proceeding of EDISON Challenge
    • /
    • 2015.03a
    • /
    • pp.138-146
    • /
    • 2015
  • 액체 상태의 물질이 매우 급속하게 냉각되면 일반적으로 과냉각액체(supercooled liquid) 상태에 도달한다. 과냉각액체는 더 낮은 온도에서 유리상(glass phase)으로 상전이를 일으킨다고 알려져 있는데, 이때 나타나는 동역학적 불균일성(dynamic heterogeneity)은 상전이를 기술하는데 중요한 역할을 한다. 그러나 일반적인 액체의 상전이를 연구할 때 주로 사용되던 상관함수(correlation function)으로는 이러한 불균일성을 정량적으로 표현하기 어렵기 때문에 동역학적 민감도(dynamic susceptibility)나 multi-time correlation function 등 동역학적 성질(dynamic property)로부터 특징적인 시간 개념 및 거리 개념을 도출하려는 연구가 많이 진행되어 왔다. 본 논문에서는 일반적으로 특징적인 거리 개념을 도출해 내는데 사용되는 4점 밀도 상관함수(four-point density correlation function)인 dynamic susceptibility(${\chi}^4$)가 입자 밀도의 요동(fluctuation)의 상관관계(correlation)가 지속되는 특징적인 시간 개념에 대한 정보 또한 포함하고 있다는 점에 주목하였다. 이에 따라 ${\chi}^4$의 시간에 대한 적분인 ${\tau}_4$를 새롭게 도입하였으며 그 결과로 ${\tau}_4$는 three-time density correlation function으로부터 도출한 ${\tau}_{Dh}$와 같은 축척(scaling)을 가지는 것을 확인하였다. 과냉각액체에 대한 장난감 모형(toy model)의 일종인 "Lennard-Jones potential 하에서 운동하는 서로 다른 두 종류의 입자들"을 연구에 사용하였다.

  • PDF

Performance Sensitivity Analysis of Liquid Rocket Engine (액체로켓엔진의 성능 민감도 분석)

  • Cho, Won Kook;Park, Soon Young
    • Aerospace Engineering and Technology
    • /
    • v.12 no.1
    • /
    • pp.200-206
    • /
    • 2013
  • A performance sensitivity of liquid rocket engine to propellant density or supply pressure change was studied. The analysis program was verified to have 1% error comparing with the measured data of a turbopump-gas generator system. The engine combustion pressure decreases as fuel supply pressure increases due to decreased mixture ratio which reduces the turbine power. The engine combustion pressure increases as fuel density increases because the total propellant flow rate is increased substantially even though mixture ratio is slightly decreased. The engine combustion pressure increases when the oxidizer density or supply pressure increases.

큰눈물버섯(Psathyrella velutina)의 감자배지와 고구마배지, 대두박배지에서의 균사생장

  • 박민선;조덕현
    • Proceedings of the Plant Resources Society of Korea Conference
    • /
    • 2003.10b
    • /
    • pp.60-60
    • /
    • 2003
  • 큰눈물버섯(Psathyrella velutina)의 균사생장 실험을 감자배지, 고구마배지, 대두박 배지를 이용하여 펠릿형성 상태를 관찰한 결과는 다음과 같다. 감자배지에서 펠릿의 수가 가장 뛰어났으며 밀도 역시 1.3g/$\ell$로 가장 높게 나타났다. 고구마 배지에서의 펠릿의 수가 가장 저조했으며 밀도 또한 0.3g/$\ell$로 가장 낮게 나타났다. 대두박 배지에서 펠릿의 수는 비교적 양호한 상태를 보였고, 그 밀도는 0.9g/$\ell$ 이었다. 공중균사의 굵기는 세 액체배지에서 5mm로 비슷한 결과를 보였지만, 고구마 배지의 공중균사는 색깔의 변색을 보여 이산화탄소가 과다 발생했음을 알 수 있었다. 큰눈물버섯의 균사생장은 감자로 만든 액체배지에서 가장 좋은 발육상태를 보였다.

  • PDF