• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.11a
• /
• pp.174-174
• /
• 2008

초음파를 이용하여 액체 연료를 분사하면 균일한 입경과 미립화가 우수하며 에너지 절약과 공해방지등을 할 수 있다. 또한 유속과 유량에 관계없이 이용할 수 있어 반도체 분야의 웨이퍼와 평판 표시기상에 사진 석판용 화학물질의 균일도포 컴퓨터 하드 디스크의 광택제 도포등에 사용할 수 있다. 이처럼 초저의 유출 용량을 요구하는 모든 공정 및 액체연료의 분사가 요구되는 모든 산업에 적용할 수 있는 장점을 가지고 있다. 하지만 현제까지 주로 사용되고 있는 초음파노즐의 액츄에이터는 단판액츄에이터형로 높은 교류전압을 인가해주어야 하는 단점을 가지고 있다. 이 단점을 해결하기 위해 적층액츄에이터형을 사용하여 초음파 노즐 구동하면 낮은 교류 입력전압에서도 단판액츄에이터형 초음파 노즐과 같은 특성을 가질 수 있다. 또한 초음파 노즐의 구동시 기계적인 진동을 이용하므로 많은 열을 발생시켜 노즐의 온도가 상승하여 세라믹 액츄에이터에도 그 영향을 미치게 되어 열적 열화 현상이 일어날 수 있기에 높은 큐리온도를 가지는 액츄에이터가 필요하다. 본 실험에서는 $Pb(Mn_{1/3}Nb_{2/3})_{0.02}(Ni_{1/3}Nb_{2/3})_{0.12}(Zr_{0.50}Ti_{0.50})_{0.86}O_3$ 조성을 사용하여 $900^{\circ}C$의 저온에서 액상 소결하여 적층혈액츄에이터를 제작하였으며 압전 및 유전 특성을 조사하였다. 제작된 초음파노즐을 구동하기 위해서는 약 36kHz의 30V이상의 교류입력전압 할 수 있는 구동회로가 필요로 한다. 압전액츄에이터의 구동을 위해서는 정확한 정현파 입력이 필요 없다. 압전액츄에이터의 특성상 유사 정현파 입력 만으로도 임피던스 매칭이 이루어지기 때문에 설계가 쉽고 간편한 Push-Pull 방식을 이용한 PWM인버터를 사용하였고 인버터의 출력 주파수를 34~38kHz까지 가변 할 수 있게 설계하였다. 제작된 적층액츄에이터형 초음파 노즐을 PWM인버터로 실제 액체 연료인 경유를 분사하였을 때의 액츄에이터의 온도 변화에 따른 공진주파수와 온도 의존성, 전기적 특성을 조사하고 미립화 분사되는 경유의 미립자 크기 및 최대 분사량을 조사 하였다.

• The Korean Journal of Mycology
• /
• v.40 no.2
• /
• pp.98-103
• /
• 2012

This study has been conducted to screen the decolorization of 4 aromatic synthetic dyes and production of ligninolytic enzymes by 4 white rot fungi such as Bjerkanderia adusta, Cerrena unicolor, Pleurotus pulmonarius and Abortiporus biennis. It was found that B. adusta, C. unicolor, and P. pulmonarius have the ability to efficiently decolorize congo red and moderately decolorized amaranth and orange G in solid and liquid culture media. However, the decolorization rate of 4 synthetic dyes by A. biennis was relatively low. The decolorization of congo red, amaranth, orange G were related to the growth rate of the fungal mycelia in the solid medium. But, the all fungi tested did not efficiently decolorize methylene blue in the liquid culture media. To investigate the production of ligninolytic enzymes in media containing aromatic compounds, fungi were cultured in 1% naphthalene supplemented potato dextrose broth medium. All fungi tested had the capability to produce laccase, lignin peroxidase and manganese peroxidase, and B. adusta was the best ligninolytic enzymes producing white rot fungus among other fungi tested.

• Journal of Radiation Protection and Research
• /
• v.40 no.4
• /
• pp.267-276
• /
• 2015

Several analyses on tritium that is the largest release of gas or liquid radioactive waste from domestic PWR and PHWR NPPs were carried out, such as release comparison, directional frequency of wind and tritium behavior changes in environmental samples. First of all, analysis result showed that tritium released from PHWR was more than ten times as gas and double to three times as liquid in comparison to PWR in 2013. Independent release management in NPP units is needed to precisely control and analyze tritium, since there were 2 units of some NPPs having the same amount of release during analysis. In analysis on frequency of wind direction, average range showed 1.7 to 11.5% by 16-point compass. In case of analysis on sampling points by wind direction, Result showed most of the sampling points are right in places. However, There are some areas needed to examine. In analysis on tritium concentration changes in environmental samples, tritium concentration near NPPs was higher than one far away from NPPs. In case of environmental samples far from PWR, a trace of tritium occur. While, tritium concentration near NPPs was more than or equal to one further from PHWR. In conclusion, tritium occurs considerably in PHWR and is lower than standard in samples. but, it is still detected. Therefore, it is needed to strengthen control in system in NPPs and to consistently monitor tritium in environment.

• Journal of Radiation Protection and Research
• /
• v.31 no.3
• /
• pp.155-164
• /
• 2006

It is judged that there could be certainty in every process of analyzing environmental samples using Liquid Scintillation Counter. Therefore, this study focuses on quantitative evaluation on uncertainty in an effort to analyze comparatively accurately environmental samples. For this, after parameters which can have an effect on uncertainty was derived, the evaluation on each parameter was tamed out. The results of analysis of each parameter showed that the effect according to the weight difference of Teflon vial did not appear, and that standard deviations of SQP(E) averages reached saturation point at $75{\sim}90$ sec at the result of making increases step by step the irradiation time of External standard, and that values measured by repeat method produces good results compared with replicate. Also, conclusion was derived that analysis on sample after it is left in cold and dark room at least above 1,000 minutes have to be carried out, and the result of carrying out verification on results measured as well as equipment itself using radioactivity-error-analysis and chi-square test, resonable result was derived.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.32 no.5
• /
• pp.649-653
• /
• 1999

A magnetic fluid separation technology was confirmed to be very effective to remove the suspended solids (SS) from aquacultural recirculating water, In this study, the effects of operating variables on the characteristics of SS removal were investigated through the test runs using magnetite of 2 $\mu$m mean diameter as magnetic powder. Magnetic flocculation here formed by adsorbing fine magnetites on the surface of suspended solid was observed. The strength of magnet was of significance in determining the SS removal efficiency as well as the capacity of the equipment. In addition, the SS removal efficiency decreased with an increase in the superficial liquid velocity, but the effect became negligible when the mass ratio of magnetite to the suspended solids was higher than 1.0.

• Korean Journal of Plant Resources
• /
• v.14 no.3
• /
• pp.251-258
• /
• 2001

Predehydration effects for cryopreservation in -196$^{\circ}C$ liquid nitrogen were studied in Korean native Aquilegia buergeriana var. oxysepala Kitamura and A. flabellata var. pumila Kudo seeds. Aquilegia species seeds were adjusted to moisture contents between 3.2 and 9.7% by air dry treatments. Seeds were placed in paper envelopes after submerged in liquid nitrogen and rewarming in 38 $^{\circ}C$ water. Seeds moisture contents by duration of drying were identified as controlling factors in the survival of Aquilegia species seeds for cryopreservation. Aquilegia species seeds having approximate 5% moisture content were able to withstand cooling to -l96$^{\circ}C$. Undehydrated seeds of Aquilegia buergeriana var. oxysepala Kitamura after being cryopreservated in liquid nitrogen have a 10.9% of moisture content and show 52.5% in germination. But, Aquilegia buergeriana var. oxysepala Kitamura seeds dehydrated by drying for 60 min. to have 6.0% of moisture content before cryopreservation show 84.7% in germination test. Properly dehydrated seeds after being stored in liquid nitrogen showed over 60% in germination rate and also shows an uniform sprouting time,11~13 days in average. Any morphologically deformity in germinating beds has not been observed. Results from this study suggest that Aquilegia species seeds can cryopreservation in liquid nitrogen if the seed moisture content is controled by a proper amount of dehydration.

• Journal of the Korean Institute of Gas
• /
• v.28 no.1
• /
• pp.11-18
• /
• 2024

If flammable liquid leaks, vapor evaporated from the pool can cause poisoning or suffocation to workers, leading to secondary accidents such as fires and explosions. To prevent such damage, ventilation facilities shall be installed when designing indoor workplaces. At this time, the behavior varies depending on the characteristics of the leaked chemical, so it is necessary to select a suitable vent location according to the material. Therefore, 3D CFD simulations were introduced to derive optimal vent position and ventilation efficiency was quantitatively evaluated by vent position. At this time, assuming a situation in which flammable liquids leak at indoor workplaces to form pools, the concentration of vapor evaporated from pools was compared to derive the optimal vent position. As a result of research on toluene with high vapor density, ventilation efficiency was confirmed to be the highest at the upper supply-lower exhaust, and it is judged that introducing it can achieve about 3.7 times ventilation effect at the same maintenance cost. Through this study, it is expected that the workplace will be able to secure workers' safety by applying simulation results and installing ventilation ports.

• Korean Journal of Plant Tissue Culture
• /
• v.26 no.3
• /
• pp.189-195
• /
• 1999

This study was carried out to clarify several factors affecting embryogenesis from anther culture of nine cultivars in Brassica oleracea L. var. italica and to investigate the characteristics of plants derived from anther culture. Androgenesis from anther culture was elevated on the B5 medium supplemented with 0.1mg/L NAA, 0.1mg/L 2.4-D and 10% sucrose. Embryo production in liquid medium was five-fold higher than solid medium. High temperature treatment at 35$^{\circ}C$ for one day before transfer to culture room maintained at $25^{\circ}C$ had effective to induce embryogenesis of cultured anthers but extended treatment at 35$^{\circ}C$ decreased significantly the percent of embryogenesis. Frequency of embryogenesis from cultured anthers exhibited significant difference from 2.8% in 'Green Valiant' to 21% in 'Haisi' as affected by genotypes. Percent of spontaneously dihaploid among regenerated plants from anther culture was ranged from 62 to 74% as affected by the genotypes. Characteristic in relation to plant height, number of leaves and branches, and size of head from anther-derived plants showed differential variation in 'Rokguray' and 'Haisi'. Among these charaters obtained from two cultivars, five lines were selected for early maturity, long plant height and large head. Selected lines were used as breeding meterials for F$_1$ hybrid.

• Journal of Mushroom
• /
• v.12 no.1
• /
• pp.17-23
• /
• 2014

pH of oriental medicine sludge was 5.3, which was similar to 5.2 of the main ingredient, corncob. Its sugar content, however, was 4.8 mg/g, which was 2.5 times higher than concorb's 1.9 mg/g. According to the addition content analysis of oriental medicine sludge by using blood agar plate, the experimental group showed much more robust growth than the control group. 10% of oriental medicine sludge was added to corncob and pine tree sawdust for test-tube culture. Then they were cultivated at $25^{\circ}C$ for 6 days after inoculating Flammulina velutipes liquid spawn. The control group and experimental group showed 2.2~3.4 and 5.8~6.4 cm hypae growths respectively. At the field test for 10% herbal medicine refuse, mushroom yield dropped by 5% compared to the control group. However, it had distinctively lower number of deformity and the 2nd grade products. An economic analysis was conducted based on the cultivation facility that produces 160,000 mushrooms per day. The analysis demonstrated that the facility can save 50,000,000 won in the starting year and 130,000,000 won in the following years from the unit cost of production excluding labour and operation cost.

• Journal of the East Asian Society of Dietary Life
• /
• v.17 no.3
• /
• pp.402-408
• /
• 2007

This study was conducted in order to evaluate the antioxidant activity of extruded ginseng in different extracted fractions. Each of the fractions obtained from extruded ginseng and ginseng (control) were extracted with 80% ethanol, and then the lipophilic components were removed with ether while the hydrophilic components were separated with water-saturated butanol. Each of the 80% ethanol/butanol/water layers were collected and evaporated to acquire samples for tests of saponin content and antioxidant activity. The antioxidant activity of extruded ginseng fractions and ginseng fractions were determined via the oxygen radical absorbance capacity (ORAC) assay. Overall, the extruded ginseng samples harbored saponin contents of 2.2 (Rg1), 2.3 (Re), 1.2 (Rc), 1.3 (Rb2), and 2.2 (Rd) times that measured in the ginseng prior to extrusion. Antioxidant capacity was also higher, not only in the 80% ethanol/butanol which harbor a significant quantity of saponin, but also in the water fractions, which harbor relatively low quantities of saponin as compared to the control samples. All three of the fractions extracted from extruded ginseng evidence significantly higher antioxidant capacity than the controls (0.05