• Journal of Advanced Marine Engineering and Technology
• /
• v.37 no.5
• /
• pp.548-556
• /
• 2013

A tapered production tubing with two different inner diameters has been suggested to increase production rates. In this research, various tapered tubing combinations are taken into account and possible tubing combinations are proposed to satisfy each objective. In previous studies, production enhancement was the main goal. However, this research also considers flow stability by analyzing tubing pressure traverse, liquid holdup, and operating conditions. For a reservoir assumed in this research, a tapered tubing of, 4.5 inch inner diameter(ID) and 2000 ft in length in the lower part and 5.5 inch ID and 8000 ft in the upper part, shows the highest net present value. Compared to a mono tubing, tapered tubings enable various tubing designs because they have smaller differences in frictional pressure loss. It is important to maintain low liquid holdup to prevent liquid loading. Smaller ID of tapered tubing in the lower part enables to achieve the object. In conclusion, it is identified that various tubing designs are achievable from the analyses of overall production operations depending on purposes specified.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.14 no.6
• /
• pp.17-24
• /
• 2010

This study was performed to make a close inquiry into a pseudo 3-dimensional structure of the liquid-propellant spray emerging from nonimpinging-type injector. Spray configuration near the injector exit was captured by a high-speed camera, and then its periodic phenomena (shedding) was observed. Detailed spatial structure of spray was investigated by spray characteristic parameters (velocity, diameter, volume flux, etc.) with the aid of a Dual-mode Phase Doppler Anemometry (DPDA). Experiment was carried out at various locations along the geometric axis of the nozzle orifice and on the plane normal to the spray stream with the injection pressures of 17.2 to 27.6 bar.

• Journal of Energy Engineering
• /
• v.23 no.4
• /
• pp.41-48
• /
• 2014

Leak of liquid has been categorized conventionally into instantaneous release and continuous release. In this study, the spread of cryogenic liquid due to limited period of release is investigated for the first time to establish a new classification method with recognizing the irrationality of the conventional one. Such physical phenomena are governed by simultaneous equations concerning volume, radius and height of pool of the cryogenic liquid, and major parameters are evaporation rate per unit area, time of release, and spill quantity. The simultaneous governing equations is decoupled to get efficiently perturbation solutions. As the results, for the same spill quantity, in view of release model, combined release model that consists of continuous and consecutive instantaneous model is necessary with small time of release, while continuous model is solely required with large time of release. Also, the combined model is necessary for small spill quantity with the same time of release. These two regimes of release are clearly distinguished using the perturbation solution to provide a clear basis for the new classification of release models.

• Tunnel and Underground Space
• /
• v.29 no.3
• /
• pp.157-171
• /
• 2019

The fracturing by liquid carbon dioxide ($LCO_2$) as a fracking fluid has been an alternative to mitigate the environmental issues often caused by the conventional hydraulic fracking since it facilitates the fluid permeation owing to its low viscosity. This study presents how $LCO_2$ injection influences the breakdown pressure, acoustic emission, and fracture morphology. Three fracturing fluids such as $LCO_2$, water, and oil are injected with different pressurization rate to the synthetic and porous mortar specimens. Also, the shale which has been a major target formation in conventional fracking practices is also tested to examine the failure characteristics. The results show that $LCO_2$ injection induces more tortuous and undulated fractures, and particularly the larger fractures are developed in cases of shale specimen. On the other hand, the relationship between the fracturing fluids and the breakdown pressure shows opposite tendency in the tests of mortar and shale specimens.

• The Korean Journal of Mycology
• /
• v.38 no.2
• /
• pp.125-129
• /
• 2010

This study was carried out to elucidate suitable spawn culture for an artificial cultivation of Neolentinus lepideus. The optimum culture conditions of the liquid spawn were deffated soy flour for main material, 12 days for culture period and 0.9 vvm for aeration volume, respectively. Sawdust spawn was appropriate for douglas fir sawdust and deffated corn flour (95 : 5, v/v) for mycelia growth and fruiting body formation. In case of liquid spawn, cultivation period was two shorter than sawdust spawn and mushroom yield was 111.9 g per 850ml cultivation bottle. In conclusion, the suitable spawn for fruiting body production was found to be liquid spawn than sawdust spawn with considering cultivation period and mushroom productivity.

• Applied Chemistry for Engineering
• /
• v.8 no.2
• /
• pp.286-291
• /
• 1997

Taxol which is recognized as a powerful anticancer reagent was extracted from yew extract and separated by NP-HPLC (Normal-PhaseHigh Performance Liquid Chromatography). The experiments were performed in the isocratic mode with $5{\mu}l$ to $100{\mu}l$ injection volume and 1ml/min mobile phase flow rate. The major mobile phase was hexane and small amounts of ethanol, methanol, 1-propanol and isopropanol were added to change the retention behavior. Prior to a real sample, the artificial mixture of taxol, cephalomannine and 10-deacetyltaxol was tested. They are hard to be separated because of similar chemical structures. The experimental results showed that the proper composition of mobile phase for separating the three components was found 96% hexane and 4% ethanol(vol.%) or 96% hexane, 2% 1-propanol and 2% methanol(vol.%). Compared to the run time of 80 minutes for the binary system, the mixture was separated within 50 minutes with the less amount of mobile phase for the ternary system. Finally, $1{\mu}g$ of taxol was separated from yew tree extracts under the optimum operating conditions.

• Journal of Korean Society on Water Environment
• /
• v.27 no.3
• /
• pp.329-333
• /
• 2011

p-phenylene-2,5-benzobisoxazole (PBO; Zylon$(R)$) fibers as an adsorbent were employed for solid phase extraction of aqueous alkylphenols. The removal ratios for 10 kinds of alkylphenols at initial concentration of $100{\mu}gL^{-1}$ were in the range of 16.8-96.3% and the removals increased with the increase of the phase ratio (fiber weight/solution volume). The plots of the logarithm of partition coefficient (log K) were correlated with the logarithm of the n-octanol/water partition coefficient (log P). The adsorbed alkylphenols were completely desorbed with the mixture of acetonitrile and dichloromethane.

• Journal of the Korean Chemical Society
• /
• v.37 no.12
• /
• pp.1003-1009
• /
• 1993

The viscosities of benzene have been determined at several temperatures and pressures to investigate the effect of temperature and pressure on the viscosity of benzene in liquid phase. When a falling ball viscometer with a constant volume contained a given amount of liquid benzene at desired temperatures and pressures, the viscosities of benzene in the viscometer could be evaluated from the measurements of the falling time of a skinker. The variations of the specific volume and the free volume of liquid benzene with temperature and pressure were, from the results, searched out. Finally, the effects of temperature and pressure on the viscosity of benzene were discussed by means of the variations of free volume with temperature and pressure.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.35 no.5
• /
• pp.547-550
• /
• 2011

We have developed a laser-based needle-free liquid drug-injection device. A laser beam is focused inside the liquid contained in the rubber chamber of a micro-scale. The focused laser beam causes explosive bubble growth, and the sudden volume increase in a sealed chamber drives a microjet of liquid drug through the micronozzle. The exit diameter of a nozzle is less than 100 ${\mu}m$, and we verify that the injected microjet is fast enough to penetrate soft human tissue. In the experiment, the microjet penetrated a 5% gelatin-water solution that replicates the human thrombus and pork-fat tissue.

• Analytical Science and Technology
• /
• v.5 no.4
• /
• pp.381-387
• /
• 1992

Optimum counting condition of a low level liquid scintillation counter for radiocarbon dating has been determined to minimize the contribution of tritium activity and get the highest FOM by the variation of scintillation solutions, scintillation solution to benzene ratio, and ${\beta}$-ray spectrum counting ranges. Under the condition, background count rate has been reduced to $2.26{\pm}0.03cpm$, and the maximum measurable age reached to about 40,000 years. And the practicality of counting system has been verified by the analysis of shell and peat samples.