• Composites Research
• /
• 제19권1호
• /
• pp.22-28
• /
• 2006

금속재 라이너를 갖는 복합재 압력용기는 라이너의 반복 수명 향상을 위해 제조 공정 중 라이너가 압축잔류응력을 갖도록 하는 자긴처리 공정을 적용할 수 있다. 본 연구에서는 자긴처리에 의한 라이너의 압축잔류응력과 이후의 응력 거동을 정확히 예측할 수 있는 유한요소해석 기법을 제시하고, 이러한 해석 결과를 바탕으로 복합재 압력용기의 반복 수명을 예측할 수 있는 방법을 제안한다. 재료 및 기하학적 비선형성을 고려한 3차원 비선형 유한요소해석을 통해 라이너의 응력 거동을 정확히 예측하고, 압력용기의 반복수명을 결정짓는 파라미터로 금속재 라이너의 폰미세스 응력을 도입한다. 라이너 재료에 대한 피로시험과 복합재 압력용기 시제품에 대한 반복시험을 통해 제안된 방법의 타당성과 유효성을 입증한다.

• 대한기계학회논문집A
• /
• 제34권7호
• /
• pp.911-917
• /
• 2010

본 연구에서는 열적-기계적 주기하중을 받고 있는 엔진 배기매니폴드에 대해서 열응력 해석방법과 열피로수명 예측과정을 제시하였다. 즉, 파손현상이 복잡한 배기시스템의 효율적인 유한요소 모델링 방법과 온도 의존성 재료의 시험결과를 이용한 해석 데이터 구성, 그리고 열사이클 하중에 대한 열응력 및 파손 예측방법을 디젤엔진의 배기매니폴드에 대해서 나타내었다. 일반적으로 배기매니폴드의 파손 취약부에서는 고온영역에서 큰 압축소성변형이 발생하고 냉각시에는 인장의 잔류응력이 나타난다. 따라서 이같은 응력과 변형률의 이력곡선으로부터 소성변형의 진폭 또는 소성에너지의 크기를 얻을 수 있으며 이를 통해서 피로수명을 예측할 수 있다.

• 한국자동차공학회논문집
• /
• 제16권5호
• /
• pp.1-7
• /
• 2008

A study of new materials that are light-weight, high in strength has become vital to the machinery of auto industries. But then, there are a lot of problems with developing such materials that require expensive tools, and a great deal of time and effort. Therefore, the improvement of fatigue strength and fatigue life are mainly focused on by adopting residual stress. And Influence of corrosive condition for corrosion fatigue crack was investigated, after immersing in 3.5%NaCl, $10%HNO_3$+3.5%HF, $6%FeCl_3$. The immersion period was performed for 365days. The compressive residual stress was imposed on the surface according to each shot velocity based on shot peening, which is the method of improving fatigue life and strength. Fatigue life shows more improvement in the shot peened material than in the un peened material in corrosion conditions. The threshold stress intensity factor range was decreased in corrosion environments over ambient. Compressive residual stress of surface on the Shot-peen processed operate resistance force of fatigue crack propagation. The fatigue crack growth rate of the Shot-peened material was lower than that of the un peened material. Also m, fatigue crack growth exponent and number of cycle of the shot peened material was higher than that of the un peened material. That is concluded from effect of da/dN.

• 한국해양공학회지
• /
• 제15권3호
• /
• pp.93-99
• /
• 2001

Recently the steel parts used at automobils are required to be used under high stress more than ever before in need of the weight down. To achieve this requirement of a high strength steel, it must be necessary to decrease inclusion content and surface defect as like decarburization, surface roughness etc.. In this study, the surface conditions are measured to know the influence on fatigue properties by two cases of shot peening of two-stage shot peening and single-stage shot peening. And for this study, two kinds of spring steel (SAE 9254, DIN50CrV4) are used. This study shows the outstanding improvement of fatigue properties at the case of two-stage shot peening in the rotary bending fatigue test and this is assumed to be from (1) on low stress condition, th 1st stage shot peening is not affected by nonmetallic inclusion under metal.(2) it is possible that the 2nd stage shot peening increases the fatigue life and the high stress but that is affected by nonmetallic inclusion under metal. (3) so far beeasily DIN50CrV4 have made high stress. But, results also show fatigue failures originated at inclusion near surface, and this inclusion type is turned out to be a alumina of high hardness.

• 대한토목학회논문집
• /
• 제7권1호
• /
• pp.43-54
• /
• 1987

본 논문에서는 압축반복하중을 받는 콘크리트의 피로누가손상 특성이 연구되었다. 압축을 받는 무근콘크리트의 원주형 공시체에 대한 기초실험을 통하여, 콘크리트의 누가손상에는 여러 인자들 중에서 반복적으로 작용되는 응력의 수준과 재하순서가 가장 크게 영향을 마친다는 것을 발견하였다. 이를 기초로 2단계 응력수준 조건하에서의 피로실험을 실시하여, 콘크리트의 누가손상특성은 Miner의 선형이론을 따르기 보다는 오히려 비선형의 상관관계를 가지며, 응력의 재하방법에 따라 누가손상의 특성과 콘크리트의 정적강도가 변화됨을 구명하였다. 또한 본 연구를 통하여 2 단계 응력수준하에서 콘크리트의 피로특성과 콘크리트구조의 잔존수명을 예측하는데 사용될 수 있는 실험공식이 도출되었다.

• 한국섬유공학회:학술대회논문집
• /
• 한국섬유공학회 2003년도 봄 학술발표회 논문집
• /
• pp.75-78
• /
• 2003

자동차용 타이어는 고무와 고무의 보강 및 치수 안정용으로 사용되는 다량의 타이어코드로 이루어져 있다. 고무는 신축성이 크고 공기압 등에 의해 물성이 현저하게 저하하므로 신축을 적게 하고 물성의 저하를 막기 위해 보강용으로 사용되는 타이어코드는 타이어의 성능과 수명을 좌우하는 중요 요소가 된다[1]. 타이어코드용 PET섬유는 타이어 내에서 계속적인 신장, 굽힘 및 압축변형 등의 물리적 피로를 받고 있기 때문에 이들로 인하여 내피로성이 아주 중요한 의미를 가진다. 이러한 타이어코드용 섬유의 내피로성에 가장 큰 영향을 미치는 것은 섬유의 미세구조인데 주로 결정영역보다는 비결정영역의 구조이고, 피로를 가했을 때 크랙의 성장으로 인해 내피로성이 감소하며 파단이 일어난다. (중략)

• 산업기술연구
• /
• 제26권A호
• /
• pp.69-73
• /
• 2006

Mach peening treatment is one of the various kinds of techniques to improve the fatigue properties. The mach peening process gives high-level work hardening and compressive residual stress near the surface layer, improving the fatigue strength. In addition, this treatment reduces slip bands that initiate the fatigue cracks near the surface. During impingement, a plastic indentation surrounded by a plastic zone is formed. Mach peening treatment characteristic is less energy consumption and is an environmental friendly processing methods that is not accompanied by pollution. It is machining process that can prevent fatigue fracture beforehand in structure using already as well as process of production. The test results showed that fatigue crack propagation delay appeared by drilling type 43%, mach peening type 110%.

• 한국표면공학회지
• /
• 제36권6호
• /
• pp.475-479
• /
• 2003

In this study, to investigate the effects of 2-step shot peening at the surface of spring steel, tests are conducted on spring steel and shot peened specimens. Various tests are accomplished to evaluate mechanical properties influenced by shot peening process, and fatigue tests are also performed to evaluate the improvement of fatigue strength. And then the residual stresses are examined. The mechanical properties of material did not change so much by shot peening. However, the fatigue strength of notched specimen remarkably increased. In the case of 1-step shot peening, fatigue strength increased by about 20％ than unpeened specimen. Especially, in the case of 2-step shot peening, fatigue strength increased by about 40％, because the residual compressive stress at surface was higher than that of 1-step shot peened specimen. The fatigue strength and life are closely related to the value and position of maximum compressive residual stress by shot peening.

• 한국소음진동공학회논문집
• /
• 제18권3호
• /
• pp.323-334
• /
• 2008

According to the delivery condition, the breakage of a product occurs when it is delivered to the customers. Therefore product's makers evaluate the durability under the delivery process by accelerated life testing. In order to conduct this accelerated life testing accurately, it is very important to identify the acceleration-factor exactly between on-road and accelerated life test condition. In this paper, the acceleration-factor is identified by applying linear damage summation law, rain-flow cycle counting and Dirlik theory under the conditions of the random vibration. And approximated FEM model of the connecting-pipe to the compressor is developed for fatigue analysis. This model is finally verified by comparing the experiment results to the numerical analysis results.

• 한국기계가공학회지
• /
• 제6권1호
• /
• pp.62-70
• /
• 2007

The development of new materials that are light-weight, yet high in strength has become vital to the machinery, aircraft and auto industries. However, there are a lot of problems with developing such materials that require expensive tools, and a great deal of time and effort. Therefore, the improvement of fatigue strength and fatigue life are mainly focused on by adopting residual stress. The fatigue crack growth rate of the Shot-peened material was lower than that of the Un-peened material. And in stage I, threshold stress intensity factor of the shot-peen processed material is high in critical parts unlike the Un-peened material. Also, fatigue crack growth exponent and number of cycle of the Shot-peened material was higher than that of the Un-peened material. That is concluded from effect of da/dN. And Fatigue life shows more improvement in the Shot-peened material than in the Un-peened material. And compressive residual stress of surface on the Shot-peen processed operate resistance force of fatigue crack propagation.