• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2010.06a
• /
• pp.317-317
• /
• 2010

전자기기의 수요 증가와 함께 기기의 소형화, 고집적화가 요구되어짐에 따라 packaging 기술 개발에서 필요한 소재에 관한 연구가 활발히 진행되고 있다. 이에 따라 우수한 절연특성, 낮은 열팽창계수와 낮은 흡습도를 갖고 있으며 무엇보다도 플렉시블하여 3차원 조립이 가능한 LCP가 차세대 기판 부품소재로 많이 거론되고 있다. 그러나 LCP는 구리 동박을 열 압착하여 패턴을 형성하므로 미세 패턴제작이 어려운 문제점이 있다. 본 연구에서는 LCP의 열가소성 특성을 이용하여 seed 구리 도금 층을 형성하여 열 압착 후 패턴 도금 법으로 $10{\mu}m$ 이하의 패턴을 형성하였으며 구리층과 LCP 간의 접합강도를 열 압착 온도 별로 측정하였다.

• Journal of the Korean Society for Precision Engineering
• /
• v.27 no.12
• /
• pp.92-98
• /
• 2010

The design of press bonding tool in LCD module equipment is a very complex and difficult task because many design able variables are involved while their effects are not known. It takes longtime experiments and much expenses to verify the effects of these design variables. However the optimization of bonding tool using OLB(outer lead bonding) and PCB Bonding is a very important problem in LCD manufacturing process, so much design efforts have been made for improving the bonding tool performance. In this paper, a reasonable and fast process which gives optimized solution under the design requirements has been presented. Both analytical and statistical methods are employed in this process. A reliable analytic model using experiment-oriented FE analysis can be obtained, in which the regression equations that predict the tool efficiency from various DOE method are found. Improvement of tool efficiency could be estimated by the regression equations using meaningful factors converged by RSM(Response Surface Method). With this process a reasonable optimized solution that meets a variety of design requirements can be easily obtained.

• The Journal of the Acoustical Society of Korea
• /
• v.29 no.2
• /
• pp.91-96
• /
• 2010

To improve the limit of efficiency of squeezing oil in a conventional method, which seeds are compressed simply, the adoptability of the additional energy by the ultrasonic wave was investigated experimentally. As the results, using the ultrasonic vibration from the Langevin-type transducer, the efficiency was increased up to 25 %, whereas the conventional method has 15% efficiency. To investigate the additional pressure by the ultrasonic wave, the acoustic impedance of the sample and the vibration velocity of the transducer were measured. Although the amplitude of the ultrasonic is about 2.8 % of the compression pressure, the efficiency is increased a lot as mentioned above because the pressure is changed according to ultrasonic period.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.23 no.4
• /
• pp.63-73
• /
• 2015

This study was carried out to evaluate the change of heating value of cow manure by applying pre-treatment process. Three types of treatment precess; Composting, Dry anaerobic digestion and Physical compression were applied as a pre-treatment method. Composting and anaerobic digestion of cow manure were cause of caloric value reduction of the cow manure. The heating value of cured compost was 5% lower than that of initial composting material. The heating value of dry anaerobic digestion residue was 25.7% lower than that of fresh cow manure. By physical compression of cow manure, heating value and VS/TS ratio (Volatile solids/Total solids ratio) of compressed cow manure were higher than that of fresh cow manure. On the other hand, heating value and VS/TS ratio of leachate generated by compression process were lower than those of fresh cow manure.

• Korean Journal of Environmental Biology
• /
• v.21 no.1
• /
• pp.31-35
• /
• 2003

The effects of different extraction methods on quality of citron juices were investigated in terms of chemical composition and sensory evaluation. Extraction methods employed were press-filtration with 400 mesh sieve, centrifugation, and enzyme pretreatment using pectinase. Enzyme pretreatment method showed the highest yield of juice with 68%, while press-filtration method, the lowest yield of juice with 26.3%. The pH of the juices was relatively similar at 3.29～3.34. Filter-pressed juice showed the highest concentration of soluble solid at 6.0$^{\circ}$Brix, while the juice produced using centrifugation showed the lowest concentration at 4.5$^{\circ}$Brix. In all the juices, fructose was the main soluble sugar. Concentration of organic acid was the highest with the juice produced with centrifugation so that supplementation with higher amount with sugar was needed for overall acceptability.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2000.04b
• /
• pp.172-175
• /
• 2000

The crimping connection is a permanent connection that maintains mechanical and electrical property for a long time by crimping two conductors. In this paper, we have done a basic study to decide normal or abnormal condition depending on crimping. Using PZT piezo-sensor, we have analyzed crimping waveforms according to the crimping height. And hence the normal or abnormal condition of crimping connections in real time could be decided by comparison of crimping waveforms in the cases of normal crimping, over crimping, under crimping and core omitting.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2014.02a
• /
• pp.177.2-177.2
• /
• 2014

현재 플렉시블 전자기기에 대한 수요가 증가함에 따라 Ag nanowire는 ITO 대체용 투명전극 물질로 주목받고 있다. Ag nanowrie 투명전극은 면저항이 약 $300{\Omega}/sq$ 정도인 PEDOT 투명전극 보다 성능이 우수하지만, 표면에 나노와이어의 적층으로 100 nm 크기의 돌기들이 존재하여 균일한 표면특성이 요구되는 투명전극에 불리한 요인이 된다. Ag nanowire를 투명전극으로 사용하여 OLED를 제조할 경우, 40 nm~100 nm의 두께를 갖는 HTL층보다 투명전극 표면의 Rpv 값이 큰 경우 Leakage current가 증가하므로 이러한 돌기들을 감소시키는 것이 Ag nanowire를 투명전극에 적용할 수 있는 중요한 요건이 된다. 본 연구에서는 PET film 위에 Ag nanowire를 얇게 코팅하여 투과도 약 87%, 면저항 $20{\Omega}/sq$ 이하의 특성을 갖는 투명전극을 제조하였다. 그리고 Ag nanowire를 코팅한 투명전극의 표면 Roughness를 감소시키기 위해 Roll press를 이용하여 나노와이어를 물리적으로 압착하였고, 압착된 Ag nanowire 투명전극 위에 PEDOT를 코팅하여 전도도 및 표면 Roughness를 감소시키는 연구를 진행하였다.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.02a
• /
• pp.536-536
• /
• 2012

나노와이어는 센서, 메모리소자, 태양전지등과 같은 다양한 소자로 응용이 되고 있다. Bottom-up 방법으로 길러진 나노와이어들을 금속전극 위에 정렬 및 접합시킬 때, 나노와이어와 금속전극간의 기계적 접합강도와 안정적인 전기적 특성이 매우 중요하다. 본 연구에서는 열압착 공정과 솔더전극(Cr/Au/In/Au, Cr/Cu/In/Au)을 사용함으로써, 나노와이어를 금속전극에 압입시켜 강한 기계적 접합강도와 안정적인 전기적 특성을 얻을 수 있는 공정을 제안하였다. 나노와이어와 금속 전극간의 접합부 분석을 위해 scanning electron microscopy (SEM)와 transmission electron microscopy (TEM)을 이용하였으며, 기계적 특성은 lateral force microscopy (LFM), 전기적 특성은 semiconductor analyzer (Keithley 4200-SCS)를 사용하여 측정하였다. 접합강도 측정결과 lateral force가 나노와이어에 가해질 때 나노와이어가 파괴되는 힘에서도 나노와이어와 금속전극간의 접합부파괴가 일어나지 않았다. 또한 나노와이어와 금속전극간의 전기적 접촉특성은 안정적인 ohmic contact을 이루었다.

• Proceedings of the Korean Society of Disaster Information Conference
• /
• 2017.11a
• /
• pp.145-146
• /
• 2017

최근 세계적으로 많은 지진이 발생하고 있으며 기상이변으로 인한 자연재해로 인해 주요 시설물들의 안전성에 관한 관심이 증가하고 있는 추세이다. 특히 비구조 요소의 경우 구조 요소보다 건설 초기 투자비용이 높아 지진이 발생하였을 때 많은 피해가 발생할 가능성이 있으며 비구조 요소의 파괴는 심각한 2차피해로 발전 될 수 있으므로 내진안전성 평가는 반드시 이루어져야 한다고 볼 수 있다. 따라서 본 연구에서는 압착식 조인트의 접촉을 고려한 수계소화설비 파이프라인의 내진성능 평가를 위한 비선형 유한요소 모델을 구축하였다.

• Journal of the Korean Applied Science and Technology
• /
• v.33 no.3
• /
• pp.560-567
• /
• 2016

Acid-activated clays (SUPER-DC, DC-A3, and P1) are used for the bleaching of cold-pressed rapeseed oil. In this study we tested the bleaching performance of cold-pressed rapeseed oil according to the different reaction time (20, 40, 60, 80 min) and temperature (40, 80, $120^{\circ}C$). Oil color (lightness, redness, yellowness), pigments (chlorophyll A and carotenoid content) and quality properties (fatty acid composition, tocopherols (${\alpha}$, ${\beta}$, ${\gamma}$, ${\delta}$), and plant sterols (${\beta}$-sitosterol, campesterol, stigmasterol) content) were analyzed. The results showed that bleaching of cold-pressed rapeseed oil with 2% acid-activated clays at $40^{\circ}C$ for 20 min, brightness (L) increased, but redness (a) and yellowness (b) decreased. Bleaching of cold-pressed rapeseed oil with 2% DC-SUPER at $40^{\circ}C$ removed chlorophyll A and carotenoids pigments significantly. In addition, about 50% of total tocopherol content in cold-pressed rapeseed oil was reduced by bleaching. Originally total tocopherol content was 46.62mg/100g in cold-pressed rapeseed oil. But after bleaching, total tocopherol content was 12.67mg/100g (20 min bleaching), 15.31mg/100g (40 min bleaching), and 13.56mg/100g (60 min bleaching). However plant sterols content in cold-pressed rapeseed oil remained unchanged by bleaching. Overall, acid-activated clays were useful for the bleaching of pigmented rapeseed oil.