• Clean Technology
• /
• v.19 no.3
• /
• pp.264-271
• /
• 2013

In this study, we optimized the removal condition of contaminants attached on the scrap surface to recycle the scrap generated from the Zr alloy tube manufacturing process back to the nuclear grade. The main contaminant is remnant of watersoluble cooling lubricant that is used in the pilgering manufacture during the tube production, and it is assumed to be compressed and carbonized on the surface of tube. Zirlo alloy tube of ${\phi}9.50mm$, which has high occurrence frequency of scrap, was selected as the object to be cleaned, and cleaning abilities of reagents were evaluated by measuring the characteristics of contaminants remained and by analyzing the surface of the tube after cleaning process. For evaluation of each cleaning agent, we selected two types of sodium hydroxide series and three types of potassium hydroxide series. Furthermore, to confirm dependence on tempe-rature and ultrasonic intensities, cleaning at the room temperature, $40^{\circ}C$, and $60^{\circ}C$ was conducted, and results showed that higher the cleaning temperature and higher the ultrasonic intensity, better the cleaning effect. As a result of the bare-eye inspection, while the use of sodium hydroxide provided satisfactory condition on the tube surface, the use of potassium hydroxide series provided satisfactory condition on the tube surface only when the ultrasonic intensity was over 120 W. In the cleaning effect analysis using the gravimetric method, cleaning efficiency of sodium hydroxide series was as high as 97.6% ($60^{\circ}C$, 120 W), but since the tube surface condition was poor after the use of potassium hydroxide, the gravimetric method was not appropriate. In the analytical result of surface contaminants on the tube surface, C, O, Ca, and Zr were detected, and mainly C and O dominated the proportion of contaminants. It was also found that the degree of cleaning on the tube affected the componential ratio of C and O; if the degree of cleaning is high, or if cleaning is well-conducted, the proportion of C is decreased, and the proportion of O is increased. Based on these results, optimal cleaning for application in the industry can be expected by categorizing cleaning process into three steps of Alkali cleaning, Rinsing, and Drying and by adjusting cleaning parameters in each step.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.43 no.4
• /
• pp.564-569
• /
• 2014

This study was conducted to reduce benzo(a)pyrene in sesame oil by addition of several kinds of absorbents (active carbon, diatomaceous earth, kaolin, acid clay, perlite, and silicate). Sesame oil containing 4.1 ppb benzo(a)pyrene was stirred with 0.2% (w/w) several kinds of adsorbents at $40^{\circ}C$ for 30 min. Active carbon resulted in the highest reduction of benzo(a)pyrene in sesame oil among the investigated adsorbents, and decolorization was observed only by using silicate. Reduction of benzo(a)pyrene was optimized by controlling amount the of active carbon, stirring time, and stirring temperature. Futher, 4.1 ppb benzo(a)pyrene in sesame oil was reduced by up to 0.91 ppb by adding 0.5% (w/w) active carbon and stirring for 30 min at $70^{\circ}C$. Optimized conditions were applied to sesame oil (2.14~4.11 ppb) purchased from a Gyeonggi traditional market, and benzo(a)pyrene in sesame oil was reduced by up 0.43~0.86 ppb.

• Journal of the Korean Wood Science and Technology
• /
• v.16 no.2
• /
• pp.50-61
• /
• 1988

접착제(接着劑) 제조(製造)를 위하여 펄프폐액(廢液)중의 리그닌을 이용(利用)하는 연구(硏究)가 1930년경(年傾)부터 진행(進行)되여 아황산펄프폐액(廢液)중의 Lignosulfonate의 경우는 페놀수지(樹脂)나 요소수지(要素樹脂)에 증량(增量)시키거난 반응(反應)시키는 연구(硏究)인데 비하여 kraft 리그닌을 이용(利用)하는 경우는 페놀수지(樹脂)의 보문(報文)이 주류(主流)를 이루고 있으나 요소계(要素系) 공축합수지(共縮合樹脂)는 아직 발표(發表)된 바 없으며 또한 아직까지 리그닌을 이용(利用)한 상업적(商業的)인 접착제(接着劑)가 제조(製造)되어 활용(活用)되지 못하고 있는 실정(實情)이다. 따라서 본(本) 연구(硏究)는 합판제조(合板製造)의 원가절감(原價節減), 폐액이용(廢液利用)의 환경보존관점(環境保存觀點)에서 Krfat Pulp 폐액(廢液)중의 리그닌접착제(接着劑)의 제조(製造)하고져 실시(實施)하였으며, Urea-Lignin 접착제(接着劑)의 도포량(塗布量)은 일반적(一般的)으로 합판(合板)에 도포(塗布)되는 요소수지(要素樹脂)의 량(量)(320g/$m^2$)과 동일(同一)하고 압축응력(壓縮應力)은 균일(均一)하게 12kg/$cm^2$으로 하여 열압조건(熱壓條件)(온도(溫度), 시간(時間))의 영향(影響))을 아울러 규명(糾明)하였다. Urea-Formaldehyde와 Kraft lignin의 혼합비(混合比)는 중량비(重量比)(N.V.C)로 7:3으로 합성수지(合成樹脂)를 만들어 합판제조(合板製造)를 통(通)하여 구명(究明)를 결과(結果) 다음과 같은 결론(結論)을 얻었다. 1. 본(本) 실험(實驗)의 결과(結果) 요소수지(要素樹脂)의 약(約) 30%가 krfat lignin으로 대체(代替)할 수 있음을 보여준 바, Pulping 공정(工程)의 부산물(副産物)로 얻어진 폐액(廢液)은 합판제조시(合板製造時) 접착제(接着劑)의 대체원(代替源)으로 유효(有效)하다. 2. 경제적관점(經濟的觀點)에서 합판제조(合板製造)를 위한 최적열압조건(最適熱壓條件)은 $160^{\circ}C$에서 3분(分)으로 압착(壓搾)하는 것이 적절(適切)하였다.(상태(常態)): 16.49kg/$cm^2$, 내수(耐水) : 18.56kg/$cm^2$, 내온수(內溫水) : 12.53kg/$cm^2$). 3. 요소-리그닌 접착제(接着劑)로 제조(製造)된 합판(合板)의 전단인장강도(剪斷引長强度)는 양호(良好)한 접착력(接着力)을 나타냈으며, 내수접착력(耐水接着力)($30^{\circ}C$에서 3시간(時間) 심적후(沈積後) 시험(試驗)은 상태접착력(狀態接着力)과 별차이가 없거나 더 높은 인장강도력(引長强度力)을 보여준 바, 내수합판용(耐水合板用) 접착제(接着劑)로 상당한 전망(展望)을 나타냈다.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.45 no.9
• /
• pp.1351-1357
• /
• 2016

Green tea (Camellia sinensis) seed extract (GTSE) was prepared under various pretreatment conditions and used to investigate its extraction yield and anti-yeast activity. Anti-yeast activity of GTSE from seeds with or without the coats was the same, whereas the extraction yield was slightly higher in extract from seeds without the coat. Anti-yeast activity of GTSE from seeds with different water contents or particle sizes was the same, whereas the extraction yield was highest in extract from seeds with 7.3% moisture or a smaller particle size. Anti-yeast activity of defatted green tea seed extract (DGTSE) was the same as that of GTSE. Extraction yield was higher in DGTSE from defatted seeds by the oil press machine compared to hexane extraction. Defatted green tea seed (DGTS), a by-product from the oil extraction process, is a good natural source of anti-yeast preservative. The extraction yield and anti-yeast activity of DGTSE were investigated using various extraction solvents, temperatures, and times. The results show that water was an economic extraction solvent, and anti-yeast activity of DGTSE was unstable at $90^{\circ}C$. These results suggest that water, extraction temperature of $50^{\circ}C$, and extraction time of 4 h were the most efficient for extraction of anti-yeast compounds from DGTS.

• KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY
• /
• v.15 no.2
• /
• pp.49-54
• /
• 2009

The effects of filling temperatures of broth and degassing method on the residual oxygen content and gas composition in the pouch and physical strength of packaging material for Samgyetang depending on the contamination of broth on the sealing layer and sterilization process were investigated. The residual oxygen content in the broth and the oxygen proportion in the headspace of package were decreased with the increase of broth temperature at filling into the pouch from 50 to 100. When the products were packaged as air-contained (Air), manually squeezed the upper side of package out to minimize the headspace (Degas) and flushed with nitrogen gas ($N_2$-Flushing) while maintaining the broth temperatures of Samgyetang at 50 or 85. The residual oxygen content and oxygen proportion were increased in the order of $N_2$-Flushing

• The Korean Journal of Food And Nutrition
• /
• v.27 no.3
• /
• pp.478-483
• /
• 2014

To develop tofu with bioactivity, red ginseng extract was added and soft tofu was prepared without pressuring and forming steps. Then, the content of antioxidant components and antioxidative activities were measured using the prepared soft tofu during storage. The contents of polyphenols of the control and the sample added red ginseng extract were $605.25{\mu}g/mL$ and $598.51{\sim}681.65{\mu}g/mL$. The content of the polyphenols was proportional to the concentration of added red ginseng extract. The content of ascorbic acid of the control was 6.42 mg%, and the ascorbic acid contents of the sample added red ginseng extract were higher than that of the control. The contents of polyphenols and ascorbic acid of control were lower than those of the sample added red ginseng extract during the storage. The addition of red ginseng extract increased reducing power and ABTS radical cation decolorization.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.39 no.3
• /
• pp.414-420
• /
• 2010

To develop tofu enhanced nutrition, storage stability and bioactivity, the soft tofu supplemented with red ginseng extract was prepared. Then, quality characteristics including storage stability, physical and chemical property, antioxidative activity, and sensory evaluation were measured. The pH and acidity of control tofu without red ginseng extract were not different from those of tofu supplemented with red ginseng extract during storage. The aerobic bacteria in the control tofu were detected from 10 days of storage whereas the number of total aerobic bacteria was reduced or not detected in the tofu added red ginseng extract during storage. The lightness and redness of the tofu supplemented with red ginseng extract were lower than those of control, but yellowness was higher. The addition of red ginseng extract did not also affect the texture of tofu, and increased lipid peroxidation inhibition and DPPH radical scavenging activity. Although the soft tofu manufactured with red ginseng extract showed a lower sensory preference in supplementation over 0.20% due to color, there was not much difference found until 0.18% red ginseng extract addition.

• Food Engineering Progress
• /
• v.14 no.4
• /
• pp.359-366
• /
• 2010

Large-scale preparation steps of antithrombotic materials from wood ear mushroom (Auricularia auricular-judae) were established as follows. Grounded dry wood ear mushroom was extracted with 75% ethanol and its precipitate was extracted with $76^{\circ}C$ water for 2 hr followed by filter pressing. The filtrate was then concentrated by vacuum and extracted with 80% ethanol, and the resulting precipitate was then freeze-dried. The formula of the product was determined using consumer susceptibility tests as follows; mushroom extract 90.5%, high fructose corn syrup 2.0%, $\beta$-cyclodextrin 1.5%, fructo-oligosaccharide 2.0%, pear puree 4.0%. When the packed products were stored at 25, 37, or $45^{\circ}C$ for 8 weeks, there were no noticeable changes in water activity, moisture content, pH, and acidity. The viable cell number of total bacteria was slightly increased during the storage period at 25 and $37^{\circ}C$, The total bacteria were not detected in the product when stored at $45^{\circ}C$. When the product was injected intravenously into rat at the level of 1,000 mg/kg, antithrombotic activities such as activated partial thromboplastin time, thrombin time, prothrombin time, and FIB were increased when compared with the control group. When the product was administrated orally into rat at the level of 500 mg/kg, it showed the same antiplatelet activity to aspirin.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.32 no.2
• /
• pp.15-25
• /
• 2024

In this study, the regeneration effect of pressurized water and ultrasonic cleaning was investigated for contaminated filter cloth from the sewage sludge filter press process. For this purpose, contaminated filter cloth was collected from a 3-ton sewage sludge hydrothermal carbon treatment filter press. First, the contamination characteristics were analyzed. According to the location of the filter cloth, air permeability and unit mass were measured, and compared with the values of a new filter cloth. Next, the results were mapped over the entire area to evaluate the contamination characteristics. Finally, pressure cleaning at 3 bar and ultrasound at frequencies of 34, 76, 120, and 168 kHz were performed on the contaminated filter cloth. In addition, the cleaning efficiency was evaluated by 3 levels of contamination degree. As a result, pore contamination occurred mainly at the bottom and both sides of the filter cloth, where the filter material was continuously injected and compressed. Surface contamination appeared evenly over the entire area. As a result of washing, air permeability increased by 1.3-3.1%p and contaminant removal was by 2.7-4.4% under pressure. In ultrasonic cleaning, air permeability increased by 12.5-61.5%p and contaminants were removed by 2.7-29.2%. In ultrasonic cleaning the lower the frequency, the higher air permeability and contaminant removal rate. Also, The higher pore contamination level, the better the air permeability improvement and contaminant removal.

• Journal of the Korean Society of Radiology
• /
• v.11 no.5
• /
• pp.297-302
• /
• 2017

Recently, building materials and air purification filters with eco-friendly charcoal are actively studying to reduce the concentration of radon gas in indoor air. In this study, radon reduction performance was assessed by designing and producing new panel-type activated carbon filter that can be handled more efficiently than conventional charcoal filters, which can reduce radon gas. For the fabrication of our panel-type activated carbon filter, first the pressed molding product after mixing activated carbon powder and polyurethane. Then, through diamond cutting, the activated carbon filter of 2 mm, 4 mm and 6 mm thickness were fabricated. To investigate the physical characteristics of the fabricated activated carbon filter, a surface area and flexural strength measurement was performed. In addition, to evaluate the reduction performance of radon gas in indoor, the radon concentration of before and after the filter passes from a constant amount of air flow using three acrylic chambers was measured, respectively. As a result, the surface area of the fabricated activated carbon was approximately $1,008m^2/g$ showing similar value to conventional products. Also, the flexural load was found to have three times higher value than the gypsum board with 435 N. Finally, the radon reduction efficiency from indoor gas improved as the thickness of the activated carbon increases, resulting in an excellent radon removal rate of more than 90 % in the 6 mm thick filter. From the experimental results, the panel-type activated carbon is considered to be available as an eco-friendly building material to reduce radon gas in an enclosed indoor environment.