• Journal of the Korean Vacuum Society
• /
• v.15 no.6
• /
• pp.619-623
• /
• 2006

The most important factor which determines resonance characteristics of FBAR(Film Bulk Acoustic Resonator) is the piezoelectricity of piezoelectric film. The piezoelectric properties of ZnO thin films which is strong as FBAR piezoelectric film is determined by the degree of c-axis preferred orientation with (002) plan. Therefore, many researchers have been interested in the study on the preferred orientation of the piezoelectric thin film. This paper has studied the preferred orientation of ZnO piezoelectric thin films using the helped seed layer of ZnO. The result shows that the c-axis ZnO thin films with columnar grains that the value of standard $deviation(\sigma)$ of XRD rocking curve is of $\sigma=1.15^{\circ}$ have the excellent piezoelectric property.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.38 no.9
• /
• pp.869-874
• /
• 2010

Recently, a piezo actuator based linear motor has been actively studied because of its higher power density, compactness and quick response. However, the characteristic of small displacement makes the application of a piezo actuator limitative. In order to overcome this limitation, some actuation mechanisms using a piezo actuator are designed by bi-metal composite or more than two piezo actuators. Therefore, it enables to generate large displacement and have high resolution. In the proposed piezo motor, we have designed a bi-directional linear motor that can be operated by only one piezo actuator. In addition, it is activated with low frequency of the applied voltage, since, we utilize first mode shape of structure of motion generator to vibrate. Finally, moving direction can be simply controlled by changing the ratio of input frequency to natural frequency of structure of motion generator.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.17 no.5
• /
• pp.149-153
• /
• 2003

In this paper, a hexagon-type piezoelectric transformer was investigated to increase the output power. The length of its side was 14mm and 17.5[mm], respectively. The piezoelectric ceramics was composed to PZT-PMN-PSN. This composition showed the characteristics which had an about 1200 of the mechanical Q-factor, 0.55 of the electromechanical coupling coefficient, 320 x 10$\^$-12/ C/N of the piezoelectric constant d$\sub$33/, 0.3% of the dissipation factor, etc. The voltage step-up ratio increased with increasing the load resistance, Rt., so it reached 80 with R$\sub$L/ of l[M$\Omega$] and was proportion to the length of side of the hexagon-type piezoelectric transformer.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2003.06a
• /
• pp.828-831
• /
• 2003

The benefits of the pneumatic valve with piezoelectric element are faster response times, low energy consumption, and the ability to be used in hazardous environments and field bus systems. In this paper, PZT actuator, 2 and 3 stages pneumatic valve were designed and manufactured. Also. characteristics of the pneumatic valve with piezoelectric element were tested with a testing system. It is confirmed that the PZT actuator is useful one for controlling the direction of pilot valve.

• Electrical & Electronic Materials
• /
• v.1 no.4
• /
• pp.311-318
• /
• 1988

초음파센서(수신기)에 응용가능한 압전세라믹스를 제조하기 위하여 Ba변조된 Pb(ZR, Ti)O$_{3}$계 세라믹스에 MnO$_{2}$를 첨가하여 첨가량과 소성온도에 따른 영향을 조사하였다. 또한 제조된 압전세라믹스를 이용하여 초음파 수신기를 제작하여 수신특성을 확인하여 보았다. 그 겨로가 MnO$_{2}$가 0.4(wt%)첨가되었을 때 압전 g정수가 가장 크고 수신감도가 우수한 것으로 밝혀졌다.

• The Journal of the Acoustical Society of Korea
• /
• v.4 no.3
• /
• pp.16-20
• /
• 1985

압전형 초음파 변환자의 특성을 압전체, matching layer, backing, 매질, tuning 및 구동 회로를 고려하여 해석하였다. 압전체는 KLM 모델을 이용하였고, 모델변수를 실험적으로 추정하여 시뮬레이션 에 대입하였다. 실험적인 RTIL은 면반사에 대한 pulse-echo를 측정하여 계산하였으며, 이론치와 비교할 때 20 dB 주파수 대역내에서 3 dB 이하의 오차가 관찰되었다.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.38 no.10
• /
• pp.1069-1074
• /
• 2014

In this study, the piezoelectric characteristics of a piezoelectric paint sensor were investigated in relation to the poling time. This piezoelectric paint sensor was composed of PNN-PZT powder and epoxy resin with a 1:1 weight ratio. The dimensions of the paint specimen were $40{\times}10{\times}1mm^3$, and the top and bottom sides were both coated with a silver paste to create electrodes. During the poling treatment, the poling time was controlled to examine the effect of the piezoelectric properties, while the poling temperature was fixed at room temperature and the electric field was set to 4 kV/mm. The piezoelectric properties were measured by comparing the output voltage from the paint sensor to the force signal from an impact hammer when the impact hammer hit the specimen. In conclusion, the optimal poling conditions were found to be an electric field of 4 kV/mm and a poling time of around 30 min at room temperature.

• The Journal of the Acoustical Society of Korea
• /
• v.30 no.7
• /
• pp.368-376
• /
• 2011

Piezoelectric composites have been widely used in broadband acoustic transducers because of their lower acoustic impedance and higher electro-mechanical coupling factor. However, their complex structure has placed many limitations on the design of various transducers. This paper suggests the methodology to substitute the 1-3 piezocomposites by a single-phased material that has properties equivalent to those of the piezocomposites. The resonant method and finite element analysis (FEA) are used to derive the equivalent properties that can accurately depict resonant properties at various vibration modes of the piezocomposites. Validity of the suggested method is confirmed by comparing frequency characteristics of fabricated 1-3 piezocomposite specimens and FEA models. Further, accuracy of the derived material constants is checked by applying the equivalent properties to FEA models of the single phase material for various resonant modes.

• Electrical & Electronic Materials
• /
• v.5 no.1
• /
• pp.14-27
• /
• 1992

핫프레스법으로 제작된 0.05Pb(M $n_{1}$3/N $b_{2}$3/) $O_{3}$+ 0.95Pb(Z $r_{0.47}$ $Ti_{0.53}$) $O_{3}$ 세라믹스에 있어서 C $r_{2}$ $O_{3}$의 첨가량이 그 시편의 구조적특성, 유전특성, 압전특성, 온도안정성 및 포아손비에 미치는 영향이 조사되었다. C $r_{2}$ $O_{3}$의 첨가량의 범위가 0.3~0/75[wt%]인 시편만이 포아손비가 1/3이상으로 주파수저하형 에너지포획소자의 기판으로 사용될 수 있으며 이 중에서 C $r_{2}$ $O_{3}$의 첨가량이 0.5[wt%]인 시편이 보다 우수한 압전특성과 안정된 주파수 온도특성을 갖고 있다. 있다.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2009.11a
• /
• pp.77-77
• /
• 2009

$Pb(Zr,Ti_O_3$계 세라믹스는 우수한 압전 특성으로 인하여 압전변압기 및 액츄에이터, 센서 등 많은 분야에 응용이 되어져 왔다. 그러나, 최근 들어 $1000^{\circ}C$에서 급속도로 많은 휘발을 하는 PbO는 환경 및 인체에 나쁜 영향을 미칠 뿐 아니라 사용 후의 처리도 어려워 선진국에서는 사용을 제한하거나 줄이고 있는 추세에 있다. 따라서, PbO를 포함하지 않은 무연 (Lead-free)계 압전 세라믹스에 대한 연구가 많은 관심을 끌고 있으며 앞으로는E 장래성 있는 하나의 이슈 분야가 될 것이다. 이러한 Pb-based System 세라믹스를 대체 할 재료로서 $(Bi_{1/2}Na_{1/2})TiO_3$나 Tungsten-Bronze type, $(K_{1/2}Na_{1/2})NbO_3$ 등이 주로 연구가 되고 있다. 특히, alkali niobate를 기초로 한 $(K_{1/2}Na_{1/2})NbO_3(NKN)$은 무연 압전 물질로서 많은 주목을 받고 있다. 그러나, NKN의 주요 성분인 K 의 높은 조해성 때문에 일반적인 고상방법으로는 고 밀도의 세라믹을 얻기 힘들뿐더러 낮은 상전이 온도 때문에 많은 응용에는 제약이 되고 있다. 이러한 세라믹의 단점을 보완하고자 Hot forging, RTGG, SPS 등 과 같이 특수한 소결방법을 사용하여 고밀도의 세라믹을 제작하지만 이 방법들은 제품 대량 생산에 있어 경제적으로나 복잡한 제조과정을 고려할 때 매우 비효율적이라고 판단된다. 그러므로 $BaTiO_3$, $LiTaO_3$, Mg, Ca등을 첨가 시켜 소결을 향상시키고 고밀도를 얻기 위해 많은 연구가 진행 중이다. 따라서 본 연구에서는 Pb-based계의 세라믹스를 대체할 우수한 특성의 세라믹스를 제작하고자 기존의 $(K_{1/2}Na_{1/2})NbO_3(NKN)$세라믹스에서 낮은 용융온도 때문에 소결하기 어려운 $KNbO_3$를 제거한 $NaNbO_3$에 $LiNbO_3$와 $BaTiO_3$를 추가한 $NaLiNbO_3-BaTiO_3$세라믹스에 $K_4CuNb_8O_{23}$(KCN)을 첨가함으로서 이에 따른 압전 및 유전 특성을 조사하였다.