• Proceedings of the KIEE Conference
• /
• 1999.07f
• /
• pp.2616-2619
• /
• 1999

The Backlight inverter used in the laptop computer is designed in this study. It has been difficult for electromagnetic transformer to enhance the efficiency and compact profile. In this study, (l) the piezoelectric transformer(PT) is used for reducing the loss: (2) the volume of core and winding coil are used in electromagnetic transformer, and (3) the zero voltage switching(ZVS) is used in the driver of the resonant circuit. The modified PT for this paper and the equivalent circuit are supported by the simulation program. ZVS is achieved by Half-Bridge inverter circuit. The result of the experiment shows more than 91% improvement in terms of the efficiency.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2010.06a
• /
• pp.16-16
• /
• 2010

The multilayer piezoelectric transformer was manufactured using $Pb(Zn_{1/2}W_{1/2})O_3-Pb(Mn_{1/3}Nb_{2/3})O_3-Pb(Zr_{0.48}Ti_{0.52})O_3$ (abbreviated as PZW-PMN-PZT) ceramics and their electrical properties were investigated. The $k_{eff}$ of the input and the output calculated from the resonant and anti-resonant frequencies were 0.403 and 0.233, respectively. The voltage step-up ratio showed the maximum value in the vicinity of 81kHz. The multilayer piezoelectric transformer showed the temperature rise of about $36^{\circ}C$ at the output power of 12w.

• Proceedings of the KIEE Conference
• /
• 2006.07b
• /
• pp.1059-1060
• /
• 2006

In this study, vibration mode multilayer piezoelectric transformer was designed and thickness simulated using ANSYS of finite element method simulator for investigating its optimum conditions ist. As a results, resonant frequency was decreased with the increase of output layer thickness, Output voltage, maximum displacement and maximum stress at 0.34mm thickness transformer were 228.1 V, $0.42{\mu}m,\;8.78[N/m^2]$ respectively.

• The Transactions of the Korean Institute of Electrical Engineers D
• /
• v.49 no.4
• /
• pp.175-182
• /
• 2000

The back-light inverter used in the laptop computer is designed in this paper. It has been difficult for electromagnetic transformer to enhance the efficiency and compact profile of the inverter. In this paper, (1) the piezoelectric transformer (PT) is used for reducing the loss; (2) the volumes of core and winding coil are used in electromagnetic transformer, and (3) the half-bridge series parallel resonant circuit is used in the driver of the inverter. The modified PT for this paper and the equivalent circuit are supported by the simulation program. The result of the experiment shows more than 91% improvement in terms of the efficiency.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1999.11a
• /
• pp.327-330
• /
• 1999

In this paper, the electrical characteristics of λ vibration-mode piezoelectric transformer for applying to CCFL driving inverter was investigated. Piezoelectric transformer was made of PZT - PMN -0.5wt% N $b_2$ $O_{5}$ composition. As a results of the electrical characteristics of piezoelectric transformer, when applied voltage was 35[ $V_{rms}$] in 100[k$\Omega$] load resistance, output voltage was about 510[ $V_{rms}$] and output power was more than 2[W]. As output power increased, step-up ratio and temperature was very stable until output power was 2.5(W). Also, Efficiency was maximum in 70[k$\Omega$] load resistance, and about 89[%]. Also, when piezoelectric transformer was continuously driven for 10[hrs], output voltage and temperature change ratio was fess than 10[%], and very stable. Conclusively, piezoelectric transformer fabricated in this paper can be applied to piezoelectric inverter for CCFL driving.g.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.14 no.11
• /
• pp.898-903
• /
• 2001

In this study, we investigated amounts, distributions and sizes of pores of multilayer piezoelectric transformer, and predicted heat emission property and electrical characteristics according to designs of internal electrode. Forming densities of device having MLC, fingered and full filled internal electrode structure were 4.73 g/㎤, 4.80 g/㎤, 4.82 g/㎤ and forming porosities were 17.3737%, 13.1475%, 12.6121%, respectively. And sintered densities of MLC structured, fingered and full filled devices were 7.76 g/㎤, 7.75 g/㎤, 7.84 g/㎤ and sintered porosities were 4.0967%, 2.7132%, 2.5317%, respectively. Therefore, we concluded that fingered and full fi1led internal electrode devices, expecially, fingered internal electrode devices had cost-effective effect and maximum poling effect due to higher sintered density and lower porosity than MLC structured device. Also we can predict that they have an effect on good heat emission and high output properties of multilayer piezoelectric transformer.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.14 no.11
• /
• pp.885-891
• /
• 2001

Ring/dot-type step-down piezoelectric transformer was manufactured by using Pb[(Mn$\sub$1/3/Sb$\sub$2/3)$\sub$0.05/Zr$\sub$0.475/Ti$\sub$0.475/]O$_3$ ceramics, which have excellent high-power piezoelectric properties. The characteristics of step-down piezoelectric transformer as a function of load resistance at output terminal was examined. Voltage gain was greatly dependent on drive frequency and load resistance, and showed maximum voltage gain at the resonance frequency. The output voltage was linearly increased as the input voltage increased. Voltage gain of the step-down piezoelectric transformer with respect to input voltage was very stable when the load resistance was in the range of 50-500 $\Omega$ .

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2001.07a
• /
• pp.680-683
• /
• 2001

The output characteristics of step-down piezoelectric transformer is changed by a structure of layers. In this paper, we simulated output characteristics of multi-layer piezoelectric transformers with variation of output layers. Also, fabricated piezoelectric transformers were compared with simulated data. From simulated piezoelectric transformers, the output voltage decreased with increasing number of layers. From these results, piezoelectric transformers were made and the output electrical power of the transformers was measured at resonance frequency and at other frequency. The electrical power of transformers was measured on each transformer's resonance mode. However, measured value of 12-layed transformer's output power was smaller than that of 6-layered transformer's one. It is supposed that internal capacitance and reactance of the piezoelectric transformer's were effected in this result. Therefore we need to connect other road resistance and capacitance in output circuit, in order to increase electrical power of transformers.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2006.11a
• /
• pp.225-227
• /
• 2006

Multilayer step down piezoelectric transformers were manufactured using PZN-PMN-PZT and PMN-PNN-PZT ceramics respectively. Sintering temperature of the ceramics was $940^{\circ}C$. And then. their electrical properties were investigated according to the variations of frequency and load resistance. The voltage step-up ratio of multilayer piezoelectric transformer showed the maximum values in the vicinity of 69 and 71kHz, respectively. At the load resistance of $100{\Omega}$, the piezoelectric transformers showed the temperature rises of about 21 and $18^{\circ}C$ at the output power of 15W and 18W, respectively. At the transformer with high effective electromechanical coupling factor($k_{eff}$), lower temperature increase was appeared.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.06a
• /
• pp.344-344
• /
• 2008

최근 들어, 압전 세라믹스 제조기술의 급속한 발전으로 기계, 전자뿐만 아니라 휴대용 전자기기의 초소형 적층형 압전모터 및 압전변압기 같은 고품질 압전소자의 개발에 있어 특히 소자의 소형화에 따라 나노크기의 분말제조가 연구의 주류를 이루고 있다. 현재 이러한 나노크기의 세라믹스 제조에 사용되는 방법으로는 화학적 공침법, 졸겔법, 수열반응, 그리고 고에너지 볼밀법등이 보고되고 있다. 볼밀링 공정은 세라믹제조 시 필수 불가결한 공정이나 일반적으로 미세화에 그 한계가 있어 $1{\mu}m$이하의 입자크기를 가지는 분말은 제조가 곤란한 것으로 인식되어 왔다. 그러나 고에너지 볼밀을 이용한 볼밀링은 원료의 변형, 파괴 등과 같은 원료의 물리적 변화 뿐만 아니라 원료를 구성하는 원자/분자 구조에 영향을 미쳐 원료의 화학적 특성의 변화를 유발한다. 이러한 화학적 특성의 변화는 이종 원료간의 화학 반응성을 향상시켜 밀링 중에 새로운 화학종의 생성을 유발하게 되는데 이러한 현상을 mechanochemical 효과라 한다. 이러한 mechanochemical 효과는 나노 분말 입자의 제조뿐만 아니라, 분자설계, 재료합성, 자원처리 및 리사이클링 등에도 그 적용이 시도되고 있다. 이러한 mechanochemical 효과를 이용하여 분말을 미세화 함으로써 저온 소결과 재료특성 향상을 기대해 볼 수 있다. 따라서, 이번 연구에서는 우수한 압전 특성을 가진 PMN-PNN-PZT조성을 가지고 시편을 제작하였으며, 고에너지 볼밀시간에 따라 그 압전 및 유전특성을 조사하였다.