• Journal of the Korean Geotechnical Society
• /
• v.16 no.5
• /
• pp.93-105
• /
• 2000

일정변형률압밀사시험의 효율성 및 적용성을 구체화하기 위해 인공시료 또는 한정된 지역에서 채취한 불교란 점성토 시료가 아닌 광범위한 지역에서 채취한 불교란 점성토 시료에 대해 시험을 실시하였다. 시료채취의 대상지역은 우리나라의 서해안에서 동해안에 이르는 13개 지역이며, 29개의 불교란 자연시료를 채취하여 일정변형률압밀시험을 113회 실시하였다. 또한, 비교하기 위해 표준압밀시험도 병행하였다. 시험결과로부터 얻어진 압밀정수에 대한 공학적 특성을 고찰하였고, 회기분석을 통해 통계식을 제안하였다. 두 시험법에 의해 산출된 압밀정수를 비교 분석한 결과 수압비가 20% 이내인 범위에서는 일정변형률압밀시험의 변형률 속도가 압밀시험의 정수에 미치는 영향은 거의 없는 것으로 나타났다. 압축지수 및 압밀계수는 일정면형률시험의 결과 값이 표준압밀시험의 결과 값보다 크게 산출되었으나 일관성을 보였다. 또한, 선행압밀압력에 있어서는 두 시험법에 Cassagrande의 방법을 적용할 경우 서로 일치하는 것으로 나타났다. 본 연구로부터 일정변형률압밀시험을 사용하여 표준압밀시험에 상용하는 상호관계식 개발의 타당성을 확인할 수 있었다.

• Journal of the Korean GEO-environmental Society
• /
• v.8 no.2
• /
• pp.49-55
• /
• 2007

It is very important to determine the consolidation rate of ground, depending on the progress of time in applying this vertical drain method. Various consolidation analysis solutions capable of forecasting the consolidation rate are being proposed at the moment. However, the degree of consolidation measured from site, has a considerable different from the degree of consolidation which was obtained by the analysis of vertical drain consolidation. This study aims at assessing the applicability and verfication of each consolidation analysis solution by comparing and analyzing the degree of consolidation measured in the field and the degree of consolidation based on the theoretical equation for the analysis of the consolidation of Hansbo, Onoue, Zeng and Xie used as the consolidation analysis solution before the beginning of construction, on the basis of monitored field results and site investigation data as to the deep soft ground in Busan area applied by PBD method.

• Journal of the Korean Geotechnical Society
• /
• v.17 no.2
• /
• pp.5-12
• /
• 2001

고유기질토의 정규압밀과 과입밀에 대한 압밀특성을 연구하기 위하여 전북지역에서 채취한 2종류의 고유기질토 IS와 YJ를 사용하여 일련의 실내 표준압밀시험과 반복압밀시험을 수행하였다. 전북지역 대표적인 고유기질토의 물리적 특성은 유기물함량이 각각 58%와 72%, 자연함수비 487%와 635%, 초기공극비 7.02와 9.72이었다. 표준압밀시험결과 K, $M_{v}$ , $C_{v}$ 는 압밀하중이 증가함에 따라서 선행하중을 경계로 일반 점토보다 크게 감소하는 특성을 보였다. 또한 2단계, 3단계 반복압밀 시험결과 K, $M_{v}$ 는 압밀하중이 증가함에 따라서 완만하게 감소하였으며 표준압밀시험결과보다는 작게 나타났다. 2단계 반복압밀의 경우 $C_{v}$ 는 정규압밀영역에서 표준압밀시험결과보다 약 10-12배정도 크게 나타났다. $C_{c}$ , $C_{a}$ 는 압밀하중이 증가함에 따라서 각각 선행하중의 약 2.5배, 3배 하중을 정점으로 크게 증감하는 고유기질토 고유의 특성을 나타냈다. 고유기질토의 $C_{c}$ , $C_{a}$ 는 일반 점토보다 압밀압력 의존성이 큰 특성을 나타냈으며 최대값도 각각 2.9-3.8, 0.3-0.4로 일반 점토보다 큰 값을 보였다. 2단계, 3단계 반복압밀시험결과 $C_{c}$ , $C_{a}$ 는 압밀하중이 증가함에 따라서 약간 증가하였다. $C_{a}$ 는 OCR이 증가함에 따라서 감소하였으며 특히 OCR이 1-2 범위에서 감소폭이 크게 나타났다. 고유길토의 제압밀계수는 반복회수 및 하중의 크기 등에 따라서 큰 영향을 받으며 또한 과압밀 크기의 대소는 고유기질토의 $C_{a}$ 에 큰 영향을 미치는 것으로 생각되어 이 분야에 대한 더 많은 연구가 필요하다.

• Journal of the Korean Geosynthetics Society
• /
• v.21 no.1
• /
• pp.23-32
• /
• 2022

This study is conducted to minimize the problems caused by the difference between the settlement and settlement time of the one-dimensional consolidation analysis by the Terzaghi's consolidation theory, which is generally used in domestic soft soil design, from the settlement and settlement time measured at the field site. Consolidation-time factor considering the field site characteristics can be determined using the relationship among the degree of consolidation, settlement time, and time factor, the time-settlement curve measured at the field is reverse- analysis using a numerical-analysis technique to reproduce the same consolidation behavior as in the field. Time-settlement and time-excessive pore water pressure data when the same consolidation behavior as the site is reproduced Consolidation-time factor of the soil of Songsan Green City by settlement and excess pore water pressure was calculated using the settlement and excess pore water pressure for each settlement time. If the results of this study use the Terzaghi consolidation-time factor, which does not consider the consolidation characteristics of the soft ground target area, it is difficult to determine the end time of the soft ground during construction. It is necessary to use the established settlement-time factor.

• Journal of the Korean Geotechnical Society
• /
• v.15 no.1
• /
• pp.141-149
• /
• 1999

In order to investigate the anisotropy in the coefficient of consolidation of the clay deposit, a series of consolidation tests were carried out on the artificially deposited clay sample by both Rowe-type and conventional consolidometers. The results of the tests showed that the coefficient of consolidation for radially inward drainage by Rowe-type consolidometer was about two times larger than that for vertical drainage by the conventional consolidometer. The smear effect caused by vertical sand drain installation was found to be significant, especially in the overconsolidated region, but smaller with the increase in consolidation pressure.

• Geotechnical Engineering
• /
• v.14 no.5
• /
• pp.181-190
• /
• 1998

One-Dimensional Nonlinear Consolidation Model(NCM) ivas developed by using an Extended Power Function Model, which could represent the compressibility of soils. A nonlinear finite element program for NCM was developed to analyze the porewater pressure dissipation and the settlement of saturated soils. Parameters used in compressibility model could be easily obtained from conventional oedometer test data. This model has been applied to Yansan-Mulgum area for the comparison with the results of CONSOL program and that of Terzaghi theory. A Good The rates of consolidation predicted by this model and CONSOL were faster than that of conventional Tergaghi theory, for they consider the nonlinear characteristics of soils. Consolidation curves of this model were located between Terzaghi and CONSOL curves. Consolidation curves near drainage boundary, where effective stress valied rapidly, seemed to reflect the variations of compressibility of sails. Consolidation curves near drainage boundary obtained from this model were composed of two parabolic curves. Intersection of the parabolic curves occurred when effective stress reached the value of preconsolidation stress. Moreover, thin model could be used to represent the effect of magnitude of applied load. whereas CONSOL and Terazghi theory could not.

• The Journal of Engineering Geology
• /
• v.12 no.4
• /
• pp.459-469
• /
• 2002

We have remolded marine clay sample collected along the vertical and horizontal directions and investigated the characteristics of the consolidation constants by SCT and CRSC methods. We have studied also on consolidation chracteristics and application for weathered granite soil using SCT and CRSC methods for undisturbed and disturbed samples. As the result, values of pre-consolidation stress, compression index, excessive pore pressure, pore water pressure ratio of the marine-clay were different due to different test methods(SCT and CRSC) and sampling directions(vortical and horizontal directions). Disturbed and undisturbed samples of the weathered granite soil have showed similar change aspect like marine clay during over-consolidatied and normally consolidatied stages.

• Journal of the Korean GEO-environmental Society
• /
• v.9 no.3
• /
• pp.61-68
• /
• 2008

Side friction is often neglected in the analysis of the results of a consolidation test when the specimen has a high ratio of diameter to height. As the height of a specimen increases, however, side friction becomes important. This paper presents an investigation of the effect of side friction on consolidation test results for normally consolidated kaolinite slurry. Consolidation tests were performed to obtain settlement, pore pressure, compressibility, and hydraulic conductivity of kaolinite slurry. The compressibility relationship is corrected for side friction using a modified form of Taylor (1942) analytical solution. Numerical simulations using the CS2 piecewise-linear model are compared with settlement and excess pore pressure measurements. Experimental results show improved agreement with a modified CS2 model in which the effect of side friction is considered. The numerical and experimental results indicate that the side friction is an important factor affecting the rate of consolidation as well as the compressibility relationship for the specimen.

• Journal of the Korean GEO-environmental Society
• /
• v.9 no.2
• /
• pp.5-13
• /
• 2008

To identify the reclamation history formed by top dredged soil reclamation layer over the original ground, various field tests and laboratory tests were conducted. Especially when the original ground was not completely consolidated, CPTu test was carried out to calculate rational settlement due to the banking load. CPTu test results showed that the degree of consolidation of weak clay ground by dredged reclamation was on average 80%. As the research area was not completely consolidated by dredged reclamation in the past, the consolidation settlement should account for the residual settlement (20%) in the case of additional banking load. When the degree of consolidation of the original ground was not taken into account, the residual consolidation was expected in excessive settlement (up to 20%) and in such case PBD (Plastic Board Drain) was not effective in obtaining desired degree of consolidation.

• Journal of the Korean GEO-environmental Society
• /
• v.9 no.6
• /
• pp.31-41
• /
• 2008

Consolidation characteristics of reclamated ground with dredged soil and methods of evaluating them are investigated in this paper. For a dredged and reclamated ground with a very high water content, self-weight consolidation being progressed, its consolidation characteristics are difficult to find since it is almost impossible to have a undisturbed sample. In order to overcome such a problem, methods of laboratory tests with disturbed sample were studied to obtain consolidation parameters required to analyze consolidation settlement in practices, using the conventional infinitesimal consolidation theory, were evaluated by carrying out various laboratory tests with disturbed soils such as oedometer test, constant rate of deformation test, Rowe-cell tests with ring diameters of 60 mm, 100 mm and 150 mm and the centrifuge model tests with 40 g-levels. Constitutive relations of void ratio - effective vertical stress - permeability were evaluated by using the inverse technique implemented with the finite strain consolidation theory and results of centrifuge model tests. Design soil parameters related to consolidation such as compression index, swelling index, coefficient of volume change and vertical and horizontal consolidation coefficients were proposed properly by analyzing the various test results comprehensively.