• Journal of the korean Society of Automotive Engineers
• /
• v.13 no.3
• /
• pp.32-42
• /
• 1991

In SI engine research the pressure data in cylinder is the most important fundamental ones leading to engine efficiencies and performances. It is, therefore, necessary to obtain accurate pressure data and yet it is often impossible to install a reliable data producing, flush-mounted type pressure transducer in a cylinder of small and medium size multicylinder SI engines. When flush mounting the transducer is not possible, the spark-plug type pressure transducer is commonly used as an alternative. In this case, the transmission tube of spark-plug type pressure transducer introduces distortions in the pressure signal. Efforts were made to understand the dynamic characteristics of spark-plug pressure transducer by shock tube tests and real engine experiments. In engine experiment the cylinder pressure data were simultaneously obtained by both flush mounted and spark-plug type pressure transducers of certain transmission tube geometry. Those pressure data collected by spark-plug type pressure transducer were tested for correction to flush mounted ones by the application of transfer function. As a result of the calibration the IMEP difference between F/M data and improved S/P data was shown to be corrected about 75-98% from the original ones.

• The Journal of the Korea Contents Association
• /
• v.16 no.11
• /
• pp.188-198
• /
• 2016

In order to supply the residential land for the promotion of public welfare, it must take a land of city suburb. That land have the difference in thinking is large for the determination of land prices to a variety of development pressure and land use regulations. In the process of executing a public project, the difference of these ideas has become a cause of conflict. Therefore, through objective study for the determination of land prices, to reduce the difference of ideas is going to be a clue of conflict resolution. This study selected the case area that is typical public district of many conflict, and then fix a compensation unit price like fair price as dependent variable. The selected variables through previous studies and expert consultation was an independent variable. To analyze the impact factors of land prices in the hedonic price model. The results were analyzed by distinguishing the group on the basis of the zoning and using, whether or not the site of the building in part that there is influence variable, the aspects of accessibility and regulation in part degree of influence variable came out different results for each group. It is analyzed that it reasonable results. Add selected site assimilation of the building that have not been presented in previous studies as a variable and which was applied at a rate to a variable of road have improved in more expliction of the influence of variables.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.40 no.12
• /
• pp.1067-1076
• /
• 2016

This paper describes the development of a hybrid-powered wheelchair (HPW) for the elderly. The proposed HPW has novel mechanical and control features compared with conventional powered wheelchairs. An ergonomic back-braking mechanism was designed in order to stop the wheels easily. In terms of control features, the HPW remarkably reduces the muscle power required by combining various assistive functions, such as wheel torque assistance, friction/inertia compensation, gravity compensation, and the one-hand driving algorithm. For wheel torque assistance, strain gauges were attached to the hand-rim in order to measure the wheel torque applied by a human. Gyroscopes and an accelerometer were attached to the wheel and chair respectively for friction and inertia compensation. An inclinometer was attached for gravity compensation and the one-hand driving algorithm was included for patients who can only use one hand. The one-hand driving algorithm controls the angular velocity of the uncontrolled wheel by using a gyroscope and pressure sensors attached to the bottom of the seat. Finally, the performance of the proposed motion assisted algorithm was verified through various experiments.

• Journal of the KSME
• /
• v.34 no.3
• /
• pp.185-192
• /
• 1994

공작기계 및 측정기계 등은 여러 가지 요인에 의해서 오차를 갖게 되지만, 이들이 갖는 계통오 차는 정밀한 측정과 보정알고리즘에 의해 보정이 가능하다. 보정을 위한 측정방법은 여러 가지가 있지만 측정정밀도가 높은 헤트로다인레이저간섭계가 가장 많이 사용되고 잇다. 따라서 이글에 서는 헤트로다인레이저간섭계의 측정원리와 측정방법과 그 응용예를 소개하였다. 헤트로다인레 이저간섭계는 외부광학기를 교체하여 측정 가능한 길이, 각도, 진직도의 측정이 가능하므로 이 들에 대한 원리와 사용방법을 소개하였으며, 실예로 본 연구소에서 사용중인 제품과 개발한 제 품에 적용하여 시스템 오차의 측정방법과 보정방법을 통해 시스템의 정밀도가 향상됨을 보여 주었다. 헤트로다인레이저간섭계를 이용하여 측정시에도 측정기 자체가 갖고 있는 오차요인 즉, 빛의 속도가 일정하지 않고 공기의 습도, 온도 및 압력에 의해 결정되는 파장변화에 의한 오차와 피측정물의 온도변화에 의한 오차 등을 고려하여야 한다. 이런 이유로 측정시에는 센서를 사용 하여 현재 환경에 대한 영향을 자동으로 보상하든지 수동으로 온도 및 파장의 값을 기입하여 보정을 실시하여야 한다.

• Journal of Energy Engineering
• /
• v.11 no.1
• /
• pp.74-80
• /
• 2002

In this study, a numerical method for fuel droplet evaporation in cylinder of S.I. engine is presented. This study was newly defined non-dimensional critical droplet lifetime and modeled heating and evaporation processes of fuel droplet during intake and compression stroke of gasoline engine. The simulation results show that simultaneous increase of gas temperature and pressure in compression stroke seems to have compensative effect on droplet gasification rate. The environment variations in cylinder have little effect on the fuel droplet gasification process. The droplet size for full evaporation at the end of compression stroke can be estimated using this program.

• The Korean Journal of Rheology
• /
• v.9 no.2
• /
• pp.60-65
• /
• 1997

PFP성형기술은 사출성형시 수지를 금형내에 환전히 채운후 저압의 공기를 이용하여 기포를 발생시켜 수지의 체적수축분을 기포의 성장에 의해 보상해주는 기술이다. 이방법은 일반 사출성형에서 많이 발생하는 싱크마크나 휨과 같은 변형문제를 해결하여 줄수 있으며 높은 압력을 필요로하지 않는다는 잇점을 가지고 있으나 이러한 최신공정에 대한 체계적인 연구는 미흡한 실정이다. 최근에 제시된 PFP성형공정의 모델링은 기포의 성장이 수지의 체 적수축에 의한 것이라는 가정을 근거로 기포핵이 생성된 이후의 기포성장을 모사하였으며 모델링에 해석결과는 몇가지 가정에도 불구하고 실험결과를 잘 설명하였다. 본 연구에서는 모델링이 가지는 문제점을 분석하고 기포성장의 메카니즘을 보다 체계적으로 이해하기 위하 여 실험적인 방법을 적용하였다. 많은 인자들을 효과적으로 고려하기 위하여 실험계획법을 적용하였으며 이를통하여 기포핵의 생성과 기포의 성장에 공기압 등이 매우 중요한 역할을 한다는 사실을 확인하였다. 이러한 결과는 모델링과 함께 PFP공정에 대한 체계적인 이해 뿐만 아니라 금형설계 및 성형조건의 설정등의 실제적인 문제해결에도 도움이 될것으로 기 대된다.

• Journal of the Korean Society for Precision Engineering
• /
• v.7 no.3
• /
• pp.83-93
• /
• 1990

The characteristics of servo systems are desired to be independent for any unpredicted operational condition. The relation between input current and output flowrate of the servovalve is dependent on the load pressure and the idea of compensation using the load pressure feedback is fundamental theory in this paper. With this idea, this paper researches the performance improvement of hydraulic position control system. Static characteristics of compensated system is analyzed by means of analog computer simulation, digital computer simulation and experiment for nonlinear model and linearized model, respectively.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.2 no.4
• /
• pp.473-484
• /
• 1998

The current interconnection charge regimes is based in fully distributed costing method. Basically this method doesn't give the incument carrier the incentive to promote efficient business operations. In this paper, 1 suggest the adoption of price cap regulation to interconnection charge as incentive schemes and review important considerations in its applications. Additionally I suggest the basic structure of the network costing model for applications of incremental costing method.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1993.04b
• /
• pp.181-184
• /
• 1993

일반적으로유압 장치를 사용하여 힘, 속도, 그리고 위치 등을 제어하는 경우 그 제어계의 설계, 제어방식의 선택에있어서는 최종 목표치의 정도, 응답성 등의 제어 성능을 고려함과 동시에 공업적으로는 가격, 동력효율 등이 중요한 설계인자로서 고려 되어 져야한다. 제어 방식응 벨브 제어와 펌프 제어 방식으로 크게 나뉘어 질 수 있으나, 벨브 제어방식에 있어서는 유압 서보벨브를 사용하여 출력 기구를 고정도로 직접 구도하는 것이 많으나 동력손실이 큰 편이며, 효율을 개선하기 위하여 압력 보상형 비례 전자 제어 벨브를 이용하는 것도 있으나, 소출력용으로서만 이용가능할 뿐이다. 이에 비하여 가변 용량형 펌프를 이용한 제어방식은 정도, 응답성은 다소 뒤떨어 지지만 효율이 양호하고 대출력 기구에 적용 가능하다는 점에서최근 주목의 대상으로되고 있다. 본 연구에서는 에너지의 효율적인사용이 가능한 전기. 유압 펌프 시스템을 설계하기위하여 먼저 각 신호전달 요소에 대한 동특성 및 정특성 실험을 행하여 시스템의 근사적인 모델링을 행하고 사판의 경사각을 제어함으로써 유압모터의 속도를 제어하는 시스템을 설계하여그 성능을 고찰하고자 한다.

• Journal of the Korean Society for Precision Engineering
• /
• v.9 no.1
• /
• pp.126-136
• /
• 1992

In this paper, a simple structured feedback compensation scheme for a electro-hydraulic servo system to keep the response characteristics unchanged regardless of the load variation is proposed. In electro-hydraulic servo system, servovalve is most important control element. But the relation between input corrent and output flowrate of the servovalve has properties as follows; firstly, in spite of constant input current, output flowrate decreases as load pressure increases, secondly, according to frequency response of typical servovalve, the characteristics of gain and phase shift is something like 2'nd order system. Load pressure feedback compensation method has been applied to eliminate the first influence, the second influence has been improved by phase lead compensation method. As a result of above compensation methods, regardless of variation load condition, spring and inertia load, the compensation scheme has been verified to be effective within the range of frequency less than 25Hz by static response and dynamic response in time domain and frequency domain through experiments.