• Applied Biological Chemistry
• /
• v.50 no.2
• /
• pp.111-115
• /
• 2007

To modify the physical properties of alginate film, the gamma ray irradiation was performed, and alginate film properties such as elongation strength (ES), elongation rate (ER), water vapor permeability(WVP), and water solubility (WS) were measured. The film made from 1.75% alginate solution (w/w) with the addition of 2% CaCl$_2$ solution suggested a good application for a film preparation in that elongation strength(ES) increased 5 fold by CaCl$_2$ treatment and water vapor permeability was decreased by 17${\sim}$22%. A solid form of alginates were irradiated with Co$^{60}$ gamma rays in the dose range of 2 to 10 kGy to make a low molecular weight alginate film, and then the intrinsic viscosity and the molecular weight of alginates were measured. Increasing the dose range of 2 to 10 kGy produced lower intrinsic viscosity and lower molecular weight, causing the decrease in the ES and WS. However, ER increased four times compared to that of without gamma ray dose, which is an indication of the different properties of algiante film. WVP of the films did not show any significant change at different doses.

• Korean Journal of Food Science and Technology
• /
• v.35 no.2
• /
• pp.217-221
• /
• 2003

Effect of direct addition of $CaCl_2$ into sodium alginate film-making solution and immersion of alginate films into $CaCl_2$ solutions on tensile strength (TS), percentage elongation at break (E), water vapor permeability (WVP), and water solubility (WS) of the films were investigated. TS of alginate films prepared by both methods increased. E of $CaCl_2-added$ films did not change significantly (P>0.05), whereas that of $CaCl_2-immersion$ films decreased significantly (p<0.05). WVP of films prepared by both methods decreased significantly, but the effect was more significant in the $CaCl_2-immersion$ films. Water resistance was not changed in the $CaCl_2-added$ films, whreras increased significantly in $CaCl_2-immersion$ films (p<0.05). Properties of alginate films depend on the concentration of $CaCl_2$ treatments in both methods, and they also depend on treatment time in the immersion method.

• Korean Journal of Food Science and Technology
• /
• v.36 no.3
• /
• pp.432-439
• /
• 2004

Increase in water vapor barrier properties of sodium alginate films was studied by preparing composite films with fatty acids, i.e., lauric, palmitic, stearic, and oleic acids, and by treatment with 3% $CaCl_{2}$ solution for 3 min. Film thickness, surface color, microstructure, tensile strength (TS), elongation at break (E), water vapor permeability (WVP), water solubility (WS), and sorption isotherm of films were investigated. Microstructure of films observed with SEM was changed by fatty acid and $CaCl_{2}$ treatments. TS decreased 25-70% depending on fatty acid used, and increased 1.5- to 2-fold by $CaCl_{2}$ treatment. E decreased by both fatty acid and $CaCl_{2}$ treatments. Except oleic acid, WVP decreased significantly (p<0.05) by forming composite films with fatty acids, particularly with stearic acid, WVP decreased more than two-fold. WS also decreased by fatty acid and $CaCl_{2}$ treatments. In stearic acid, WS decreased about 30-fold by combined treatment of fatty acid and $CaCl_{2}$. Sorption isotherm showed typical biphasic pattern with deliquescent point of 0.75. Results of isotherms and BET monolayer moisture content indicated hydrophilicity of film decreased by $CaCl_{2}$ treatment.

• Polymer(Korea)
• /
• v.37 no.6
• /
• pp.677-684
• /
• 2013

Zinc alginate films were prepared by a film maker from sodium alginate solutions of different weight ratios and then they solidified into 3 wt% content $ZnCl_2$ coagulation solution and washed and dried at a $60^{\circ}C$ oven for 20 min. The characteristics were measured by several methods (antimicrobial activity, viscosity, FTIR, TGA, SEM, EDS, contact angle, tensile strength and solubility) and the film properties were investigated. The antimicrobial test showed that the zinc alginate films result in excellent antimicrobial activity in the two strains (Klebsiella pneumonia, Staphylococcus). The surface of zinc alginate film from the solution of 9 wt% sodium alginate showed more uniform shape than any other films and the cross-section were hard and rough when the films were well-solidified by the $ZnCl_2$ solution. The tensile strength of zinc alginate films increased along with the concentration of sodium alginate solution due to the cross-linking, and the initial thermal decomposition temperature increased gradually.

• Food Science and Industry
• /
• v.50 no.2
• /
• pp.37-51
• /
• 2017

Food packaging strategies have steadily improved with increasing demand for improved food safety, convenience, and shelf life. The development of edible film has been hailed as a technology substituting packaging using synthetic plastics. There has been a surge for research to develop antimicrobial edible films and coatings that can increase microbiological safety while preserving foods. This review addresses recent results that are useful in advancing and extending research into antimicrobial edible films. In this review, we suggest the trend of the development of antimicrobial edible film/coatings by outlining edible film materials, antimicrobial substances, antimicrobial and physical properties of the films, commercial antimicrobial edible films, and methods to statistically predict the efficacy of antimicrobial edible film/coatings, reported in recent studies.

• Polymer(Korea)
• /
• v.38 no.5
• /
• pp.580-587
• /
• 2014

Composite films of zinc calcium alginate were prepared by a film maker from 7 wt% sodium alginate solution and then they solidified into 3, 5 wt% content $ZnCl_2$, $CaCl_2$ solution followed by washing and drying at room temperature. The characteristics were measured with several methods (antimicrobial activity, water solubility, swelling ratio and viscosity, SEM, EDS) and the film properties were investigated. Composite films of zinc calcium alginate showed an increase in the water resistance by increasing $ZnCl_2$ and $CaCl_2$ content and the antimicrobial test showed that the calcium alginate as well as zinc alginate films result in excellent antimicrobial activity in the two strains, Staphylococcus and Escherichia coli. The results show the possible improvement of the physical properties of composite films.

• Journal of Marine Bioscience and Biotechnology
• /
• v.2 no.3
• /
• pp.133-141
• /
• 2007

There are produced more than 600,000 tons of seaweeds every year along the coast of the Korea. Jeonnam province, south-west coast area, of Korea is producing 93% of total amounts of seaweeds. The laver, sea mustard, and tangleweed maintain stability in the output and has been exported as a simple product processing through drying or salting. It was evaluated the low value-added products and limited the expansion for the consumption of seaweeds. The seaweeds contains 40-60% carbohydrate and structurally different compared with land plant. The dietary fiber from seaweeds has been known the function of facilitating the bowl movement, excretion the heavy metal in the body, lowering the blood cholesterol level, anti-coagulant of blood, and anticancer. Especially, brown algae including sea mustard, seaweed fusiforme, and tangleweed contains alginic acid, laminarin, mannitol, fucoidan which are lowering the blood cholesterol level, lowering blood pressure, and fusion of blood clot. Agar-agar, carrageenan, and porphyran compound in red algae are known to antimutagenicity and anticoagulant function. In spite of potential of seaweed as a main bio-resource, there are lack of research to facilitate the consumption with its functional properties and consumers are unsatisfied with simple processing products. Also, the seaweed by-product dump into the sea and cause pollution of the seawater. Therefore, there are needed the scheme to promote the consumption of seaweeds. The development of value-added products, finding functional properties from seaweeds, development the functional feed for animal using seaweed by-products, and utilization of unused algae for food or other industrial uses will increase fisherman's income as well as serve as an aid for the people health due to its functional properties. Using by-product of seaweed and unexploited seaweed are needed to development of bio-degradable food packaging material and functional feed for animal.