• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.13 no.9
• /
• pp.3869-3875
• /
• 2012

In this study, mathematical modeling and experimental analysis were executed in order to evaluate the valve dynamic characteristics when the hydraulic pressure applied. High pressure on the master cylinder effects on the valve dynamic characteristics have been analyzed. The pulsation pressure generated in hydraulic systems causes noise, vibration and odd effect to the system. To reduce the pulsation pressure, high frequency PWM control of 20KHz was attempted. Also, an analytic method is proposed for the resultant forces of electromagnetism and hydraulic pressure generated in the real vehicle electro stability program. Consequently, results of solenoid valve dynamic characteristics analysis derived in the study can be confirmed criteria for the optimal control of electronic stability program system.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2001.05a
• /
• pp.427-430
• /
• 2001

Computers and automated manufacturing processes in industry are very susceptible to voltage sags and surges. The need for greater power reliability makes the end-users to use the uninterruptible power supply and other electronic power conditioning means to maintain the stable voltage. In this paper, a single-phase buck ac-ac converter for Custom Power Applications is presented. The presented converter uses IGBT's as switching module and maintains the stable voltage through PWM technology in spite of the input voltage sags and load rejections. In this paper, the operation characteristics of the power converter at steady state are illustrated using PSPICE simulations.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.38 no.5
• /
• pp.490-498
• /
• 2010

This paper presents an autonomous target tracking approach and technique for transmitting ground control station image periodically for an unmanned aerial vehicle using onboard gimbaled(pan-tilt) camera system. The miniature rotary UAV which was used in this study has a small, high-performance camera, improved target acquisition technique, and autonomous target tracking algorithm. Also in order to stabilize real-time image sequences, image stabilization algorithm was adopted. Finally the target tracking performance was verified through a real flight test.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.11 no.6
• /
• pp.459-464
• /
• 2001

This paper discusses a stochastic stabilization of Takagi-Sugeno(TS) fuzzy system with Markovian input delay. The finite Markovian process is adopted to model the input delary of the overall control system. It is assumed that the zero and hold devices are used for control input. The continuous-time TS fuzzy system with the Markovian input delay is discretized for easy handling delay, according, the discretized TS fuzzy system is represented by a discrete-time TS fuzzy system with jumping parameters. The stochastic stabilizibility of the jump TS fuzzy system is derived and formulated in terms of linear matrix inequalities (LNIS)

• Journal of the Korea Institute of Military Science and Technology
• /
• v.19 no.4
• /
• pp.435-442
• /
• 2016

For inertial navigation systems, initial information such as position, velocity and attitude is required for navigation. Self-alignment is the process to determine initial attitude on stationary condition using inertial measurements such as accelerations and angular rates. The accuracy of self-alignment is determined by inertial sensor error. As soon as an inertial navigation system is powered on, the temperature of accelerometer rises rapidly until temperature stabilization. It causes acceleration error which is called temperature stabilizing error of accelerometer. Therefore, temperature stabilizing error degrades the alignment accuracy and also increases alignment time. This paper suggests a method to calculate azimuthal attitude using curve fitting of horizontal control angular rate in fixed-gain self-alignment. It is verified by simulation and experiment that the accuracy is improved and the alignment time is reduced using the proposed method under existence of the temperature stabilizing error.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2002.04a
• /
• pp.70-71
• /
• 2002

연소실의 세장비(aspect ratio)가 작으면서 추진제의 고 충전을 이용한 단시간 연소 모타는 유도탄의 사출 모타 용으로 사용될 수 있다. 사출 모타는 일반적으로 모타 무게에 대한 제약 조건이 까다롭지 않기 때문에 무게 경량화에 대한 부담은 줄어들지만, 모타의 부피가 커지면 유도탄 발사 장치의 부피가 커지기 때문에 공간적인 측면에서 가능한 작게 하는 것이 시스템 전체의 효율을 증대시킬 수 있다. 또한 사출 모타의 연소 시간이 짧기 때문에(1초 이내) 추진제의 웹 두께가 작으므로 연소실의 주어진 공간에서 추진제를 많이 채우기 위한 방법으로 원통 튜브형 그레인을 여러 개의 다발로 사용하는 방법이 효과적이다. 이러한 관점에서 사출 모타용으로 다발 원통 튜브형 그레인을 설계/제작/연소시험을 하였더니 작은 저주파(약 10Hz)의 연소 불안정 현상이 발생하였다. (그림1). 이러한 주파수 대역은 일반적으로 잘 알려진 연소 불안정 모드 (longitudinal, tangential, and radial mode)와는 다른 아주 특이한 현상이다. 이러한 현상의 주 원인은 연소실 내 압력의 비평형에 의한 현상이라 판단되어 다음과 같은 연구를 수행하였다. 1) 그레인 튜브간의 압력 평형을 원활하게 하기 위하여 그레인에 구멍(홀)을 뚫어서 연소 안정화에 미치는 영향에 대한 연구(그림2), 2) 그레인에 홀을 뚫지 않고 격자와 격자간의 공간을 이용하여 그레인 간에 발생된 저주파의 압력 진동을 산란/소멸 시키는 연소 안정화 연구(그림3).

• The Transactions of the Korean Institute of Power Electronics
• /
• v.14 no.6
• /
• pp.481-487
• /
• 2009

This paper proposes a regulation method of DC line voltage for urban transit system fluctuated during the acceleration or deceleration by using supercapacitor. Supercapacitor is modelled electrically under the assumption of three different time constants of RC circuits with variable capacitances depending on the voltage. And its parameters are determined by the experimental measurements. The energy storage system using supercapacitors is installed based on this model, and the proposed model is tested through the simulations and experiments, and the controller for charging and discharging is designed. Finally, it is tested at Kyoungsan test site for the urban light rail road system and the energy saving effect is evaluated economically.

• The Journal of the Acoustical Society of Korea
• /
• v.15 no.4
• /
• pp.105-112
• /
• 1996

A linear acoustic analysis for baffled rocket combustion chambers has been developed. This study provides the comprehensive theoretical background for the baffle as one of the stabilizing devices in a liquid rocket propulsion system. Several specific effects of baffles are presented as mechanisms by which baffles eliminate instability. Included are longitudinalization of transverse waves inside baffle compartments, severe restriction of velocity fluctuations near the injector face, and decreased normal mode frequency of the chamber.

• Journal of Korea Society of Industrial Information Systems
• /
• v.18 no.5
• /
• pp.73-80
• /
• 2013

Recently, Li-ion battery is regarded as a potential energy storage device in the lime light and it can supply power to the satellite very effectively during eclipse. Because it has better features as high voltage range, large capacity and small volume than any other battery. Generally, multi cells are connected in series to use Li-ion batteries in satellite application. Since the internal resistance of cells is different each other, voltage in some cells can be overcharged or undercharged, so capacity of the cell is reduced and the life of whole battery pack is decreased. Therefore, a voltage balancing circuit with Fly-back converter is proposed and the voltage equalization of each cell is verified the prototype in this paper.

• The Journal of Korean Academy of Prosthodontics
• /
• v.55 no.3
• /
• pp.319-324
• /
• 2017

Patients with maxillectomy defects predisposed to not only difficulty in deglutition, mastication, speech but also psychological depression from impaired facial esthetics that affect life quality. Obturator prostheses play a important role in restoring the lost form, function and the quality of life for patients with maxillectomy defects. This clinical report presents the simplified approach to predict the degree of adequate facial support by Artificial palate which reflected from a maxillary interim obturator during the stabilization period after maxillectomy.