• The Journal of Engineering Geology
• /
• v.32 no.4
• /
• pp.535-545
• /
• 2022

Improving the stability of the ground in seismic design requires an understanding of the dynamic behavior of the ground under seismic loads. The shaking table test is an important methodology to provide this understanding. This study aimed to assess the influence on boundary conditions, as they are among the most important factors affecting the test. This was achieved by testing the influence of boundary conditions on the seismic responses of model slopes at different locations in the testing apparatus. A model slope was fabricated at different locations in a laminar shear box, and the influence of the boundary conditions was then measured. Each model slope was created at 100, 50, and 25 cm from the soil wall, and sine wave seismic loads of the same size were inputted. The results confirmed that the acceleration was amplified by the influence of the boundary in the case of the slope being located 25 cm from the boundary, whereas the influence of the boundary conditions decreased when the slope was located at 50~100 cm.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 1998.11a
• /
• pp.186-189
• /
• 1998

셀룰러 오토마타는 복잡한 자연 세계를 단순한 규칙으로 해석할 수 있고, 병렬 계산이 가능하다. 본 논문에서는 국부적인 천이 규칙(transient rule)에 의해 움직이는 셀룰러 오토마타를 이용해 화상에 대한 아무런 사전 지식이 없는 상태에서의 화상 첨예화 알고리즘을 제안한다. 제안된 셀룰러 오토마타는 화상의 첨예화를 위한 3개의 천이 규칙을 가지며, 화상의 각 픽셀에서 4연결 이웃과 자유 경계조건을 가진다. 각 규칙은 각기 고유한 특징을 가지면서 화상을 첨예화한다. 또한 이러한 셀룰러 오토마타는 순차적이고 병렬적인 움직임을 가지며, 이 움직임은 Lyapunov functional을 만족하는 감소함수로 표현된다. 따라서 셀룰러 오토마타를 이용한 화상의 첨예화는 매우 빠른 속도로 수렴하고, 잡음에도 안정적인 결과를 나타낸다. 실험을 통해 본 방법의 유효성을 확인한다.

• 한국신재생에너지학회:학술대회논문집
• /
• 2007.06a
• /
• pp.501-503
• /
• 2007

오호츠크해 사할린 북동 해저사면지역은 세계적인 가스수화물 산출지역으로 알려져있다. 이미 2005년 탐사에서 50 cm 두께의 순수 가스수화물 시료를 해저면에서 채취한 지역이다. 2006년 탐사에서는 다양한 주파수대역의 고해상도 지구불리장비를 사용하여 탐사를 실시하였다. Side-scan Sonal와 3.5 kHz SBP 탐사, 수중음향 탐사를 통해 대규모 하도구조가 가스수화물지역의 북쪽 경계를 형성하고 있음을 밝혔다. 가스수화물의 BSR은 수심에 얕아짐에 따라 계속해서 심도가 감소하여 수심 약 300 m에서 해저면에 다다름. 이는 연구지역에서의 가스수화물 안정대의 상부경계가 약 300 m임을 시사한다 가스수화물 분출구조들은 약 1000m 수심을 경계로 천부에 분포하고, 해저면에는 원형의 가스분출구조들이 특징적으로 나타난다. 반면에 1000 m 수심보다 깊은 지역에서는 mud-dirpir의 상승구조로 판단되는 상승구조들이 해저면에 굴곡지형을 형성하고 있다. 해수중으로 분출하는 가스기둥들은 수심 111.2 m에서 1226.4 m 지점까지 다양한 수심에서 분포하며, 상승높이는 최대 750 m에 이르며, 약 150 m 수심까지 도달한다. 이는 해저에서 분출되는 메탄가스가 해수에 흡수되지 않고 해수면까지 이동하여 대기중으로 발출될 수 있음을 시사한다.

• The Journal of Engineering Geology
• /
• v.19 no.2
• /
• pp.205-215
• /
• 2009

The conventional numerical models to analyze flow in subsurface porous media under the transient state usually generate numerical oscillation and unstability due to local flux domain for critical cases such as infiltration into initially dry soil during rainfall period. In this case, it is required refined mesh and small time step, but it decrease efficiency of computation. In this study, numerical unstability in discontinuity domain is removed by applying particle tracking algorithm to simulate unsteady subsurface flow with inflow boundary condition. Finally the hybrid LE FEM improving numerical stability is proposed. The hypothetical domains with unsteady uniform and nonuniform flow field were used to demonstrated algorithm verification. In comparison with analytic solution, we obtained reasonable results and conducted simulation of hypothetical 3-D recharge/pumping area. The proposed algorithm can simulate saturated/unsaturated porous media with more practical problems and will greatly contribute to accuracy and stability of numerical computation.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.35 no.2
• /
• pp.41-48
• /
• 2023

In this study, simplified linear numerical method that can simulate wave generation and transformation by a moving bottom is introduced. Numerical analysis is conducted in wave number domain after continuity equation, linear dynamic and kinematic free surface boundary conditions and linear kinematic bottom boundary condition are Fourier transformed, and the results are expressed in space domain by an inverse Fourier transform. In the wavenumber domain, the dynamic free water surface boundary condition and the kinematic free water surface boundary condition are numerically calculated, and the velocity potential in the mean water level (z = 0) satisfies the continuity equation and the kinematic bottom boundary condition. Wave generation and transformation are investigated when the triangular and rectangular shape of bottoms move periodically. The results of the simplified numerical method are compared with the results of previous analytical solutions and agree well with them. Stability of numerical results according to the calculation time interval (Δt) and the calculation wave number interval (Δk) was also investigated. It was found that the numerical results were appropriate when Δt ≤ T(period)/1000 and Δk ≤ π/100.

• Proceedings of the Korea Air Pollution Research Association Conference
• /
• 2003.11a
• /
• pp.113-114
• /
• 2003

도시지역 하층대기의 오존 연직분포는 지표부근의 NOx배출의 영향과 대기경계층의 일변화 및 구조적 특성에 의해 시·공간적으로 큰 변화를 나타낸다. 일반적으로 야간에는 역전층 내의 건성침적과 NOx 적정작용에 의해 오존농도가 감소하며, 하층 안정층과 분리되어 있는 잔류층(residual layer)의 오존농도와 큰 차이를 보이게 된다. 아울러 일출 후 안정층 파괴와 혼합고 성장에 의해 지표부근의 오존농도가 증가하고 연직적으로 비교적 일정한 오존분포가 나타난다(Zang et al., 1998; Berkowitz et al., 2000). (중략)

• The Journal of the Korea institute of electronic communication sciences
• /
• v.11 no.12
• /
• pp.1225-1230
• /
• 2016

This paper deals with performing missions of a small biped robot using image processing. Localization is required for stable walking under a given map. Localization of the robot is done by extracting boundary on a driving course. Estimation of three parameters including location and orientation is required when walking on a plane. In this paper, two parameters including the location of the robot along the vertical direction of robot's walking direction and an orientation is estimated for localization. Color is used for the detection of obstacles and normalized values are used for the stable detection.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2007.11a
• /
• pp.119-122
• /
• 2007

The present study employs experimental approach to identify combustion stability characteristics of fuel-rich gas generators. The gas generator of interest, fueled by LOx and Jet A-1, experienced combustion instability coupled to a longitudinal resonant mode of the combustion chamber at about 1200 Hz. The occurrence of instability is strongly associated with acoustic boundary condition at the exit .and axial location of maximum heat release. As a result, stretching heat release zone in the axial direction by increase of the fuel nozzle diameter has dramatically stabilized combustion.

• Journal of the Korean Geosynthetics Society
• /
• v.2 no.3
• /
• pp.3-9
• /
• 2003

Geosynthetics as a reinforcing material for earth structures have ever increased due to their excellent economy, fine external appearance, and easy construction. Geogrids are high-strength, orientated-polymer grid structures used to reinforce soil. This paper deals with the construction and sire monitoring for a 5.1m high-reinforcd slope with $75^{\circ}$ steep. The purpose of site monitoring is to evaluate the applicability of reforced slope with geogrid. Full scale field performance during and after construction was monitored by incorporating instrumentation including strain gauges on the geogrid, and horizontal and vertical movements.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.12 no.8
• /
• pp.1377-1383
• /
• 2008

Parameterization of a 3D triangular mesh is a fundamental problem in various applications of geometric modeling and computer graphics. There are two major paradigms in mesh parameterization: energy functional minimization and the convex combination approach. In general, the convex combination approach is wifely used because of simple concept and one-to-one mapping. However, the approach has some problems such as high distortion near the boundary and time complexity. Moreover, the stability of the linear system may not be preserved according to the geometric information of the mesh. In this paper, we present an extension of the convex combination approach based on the mean value coordinates, which resolves the drawbacks of the convex combination approach. This may be a more practical solution because it is able to generate a stable linear system in a short time.