• Bulletin of the Society of Naval Architects of Korea
• /
• v.27 no.3
• /
• pp.31-37
• /
• 1990

To obtain the values of linear stability derivatives, both analytical and experimental methods are now proposed and in use. The experimental method is well known as the planar motion mechanism(PMM) test. Its concept is to drive the model with a prescrived frequency and amplitude of the motion and pick up the hydrodynamic forces. But this kind of method is inconvenient in case we want to know the stability derivatives in wider range of the frequencies. So a different method is attempted that with one test run, we can get the derivatives in wider range of the frequencies. This technique forces the impulsive motion on the model, using the power of the oil pressure pump. This kind of method was originated by Scragg, C.A., Cummins, W.E, or Frank, T., This resarch is a further development of such preceding works. Todd's series 60(Cb=0.7) 2.00M model is chosen for the test and the results are compared with Van Leeuwen's famous PMM test results.

• 한국전산유체공학회:학술대회논문집
• /
• 2011.05a
• /
• pp.428-433
• /
• 2011

In this paper, a prediction method for dynamic stability derivatives is studied using steady state simulations in rotational coordinates. The simulations require the extension of a standard CFD formulations based on inertial coordinate. A new CFD code based on the method are developed. Flows induced by steady circular motions of airfoils with a constant pitch rate are simulated with the code. From the numerical simulations, the pitch rate derivatives are obtained at various Mach numbers, and the results are compared with other numerical results. The numerical simulations show that the new code are capable of predicting dynamic stability derivatives.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.33 no.5
• /
• pp.34-40
• /
• 2005

Most analyses and researches on Micro Aerial Vehicle(MAV) have focused upon propulsion, automatic control, aerodynamic configuration in low Reynolds number region, and miniaturization of telemetric parts. In the present study, a structural concept for MAV is designed by using the composite material suitable for light flight structures. In order to study the load path and stress state of the MAV, the load and structural analyses are simultaneously performed by the aeroelasticity module of MSC/NASTRAN. The stability derivatives of the MAV are obtained for three symmetric, two antisymmetric, and four unsymmetric maneuvering conditions. Although the aerodynamic theory in MSC/NASTRAN could not be proper for MAV analysis, it provides an traditional and effective tool for trim and load analyses and may be corrected with the results by more accurate theory or test. The results show that the inertial load due to payloads has a more effect on stress rather than the aerodynamic load.

• Journal of the Korean Society of Hazard Mitigation
• /
• v.8 no.3
• /
• pp.149-155
• /
• 2008

To evaluate the formulae for the stability of riprap, the formulae of Isbash, California division of highway, Netherlands, ASCE, Pilarczk, and Maynord are comparatively analysed with the experimental results. The critical velocity which initiates the motion of riprap is increased with the weight and the size in diameter and the riprap size with water depth, Froude number, shear velocity with mean velocity, Shields parameter have great correlation with them. The results by 6 formulae are overestimated in riprap size in diameter and the result by Maynord formula proposed by U.S. Army Corps of Engineers estimates rather correct. The results by Isbash, Netherlands, and Pilarczk are overestimated in riprap weight but the result by California division of highway formula coincides with experimental result. In the experimental results of model riprap artificially made by gypsum with light weight density, the critical velocity is increased with shape factors. The critical velocity appears greater in regular arrangement of model riprap than in random arrangement of it. Therefore the shape factor and the degree of interlocking are an important parameters in riprap stability.

• Journal of Navigation and Port Research
• /
• v.46 no.3
• /
• pp.168-178
• /
• 2022

In this study, the resistance test, the vertical static angle of the attack test and VPMM test will be conducted to estimate the maneuverability of underwater vehicles with ahead propeller. The vertical static test will be conducted within the range of -40deg to 40deg, to investigate the cross-flow drag at high incidence angles. The tests will be conducted by dividing the propeller rotation into a case in which the propeller rotates at a specific rpm, and a case in which the propeller rotates naturally, according to the towing speed. Hydrodynamic coefficients of vertical direction will be estimated by the captive model tests. Additionally, the vertical dynamic stability index based on estimated hydrodynamic coefficients will be calculated and the impact of the propeller revolution state on the index will be investigated. The results are expected to be used as reference test data for underwater vehicles with ahead propeller.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.31 no.6
• /
• pp.45-51
• /
• 2003

This paper presents a method to improve lateral stability of a four-seat canard aircraft, Velocity-173. Longitudinal stability of Velocity-173 is rather good, but lateral stability is relatively poor. A small panel which increases the area of vertical tail is designed and manufactured. In a design process, AAA(Advanced Aircraft Analysis) is used to predict the change in stability. Flight test is performed to validate the effect of a small panel attached under the vertical panel. Maximum likelihood estimation method is used to extract lateral controllability / stability derivatives from flight test data. This work validates the effect of a small panel attached under the vertical tail.

• Water for future
• /
• v.26 no.1
• /
• pp.51-62
• /
• 1993

The most significant factor in estimating annual runoff must be the precipitation. But in the previous study, the watershed area instead of precitation was included as an independent variable in regression model in the process of checking accurate data. The criterion of accurate data was the runoff ratio in the range of 20% to 100%. In this study the valid range of evapotranspiration was adopted as a criterion of accurate data and the same data were reexamined. It came up with following model which has a high coefficient of determination and conforms to hydrologic theory. R=-518.25+0.8834P where, R: runoff depth(mm) P: precipitation(mm) This regression model was found to be stable by cross-validation and is proposed as annual runoff estimation model applicable to ungaged small and medium watersheds in Korea.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.30 no.6
• /
• pp.31-38
• /
• 2002

This paper presents the analysis of the flight test data measured by the sensors installed on a four-seat canard aircraft. The inherent stall proof characteristics of canard aircraft was verified from the stall test. The dihedral effect, adverse yaw and roll control power were examined and the neutral point that determines the longitudinal stability of the aircraft was investigated. The dynamic characteristics such as dutch roll mode were also examined. Without relying on the parameter identification method, the aerodynamic derivatives or the relations between the aerodynamic derivatives were obtained by analyzing the steady state flight data.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.23 no.4
• /
• pp.363-370
• /
• 2020

In this study, pitching stability derivatives of the conical shell configuration is predicted using commercial CFD code. Unsteady flow analysis with forced harmonic motion of the model is performed using overset mesh. The test is conducted about Basic finner missile configuration. The static and dynamic stability derivatives are good agreement with available experimental data. As the same way, a conical shell is analyzed in Mach number 1.6 and various reduced frequency. The static and dynamic derivatives are obtained from the time-pitching moment coefficient histories in each of four cases of mean angle of attack. The variation of reduced frequency is not affected static and dynamic derivatives. Increasing the mean angle of attack, static derivatives are increased slowly. Comparison of the Cm curves at the steady and unsteady state results shows that the Cm curve including the damping effect is lower than otherwise case, approximately 9-18 %.

• Journal of Aerospace System Engineering
• /
• v.9 no.3
• /
• pp.12-16
• /
• 2015

인간동력 항공기 TORUK MAKTO I에 대하여 양력선이론 및 XFOIL을 사용하여 도출한 공력계수 및 미계수 값과 CATIA를 사용한 관성모멘트 추정 값을 사용하여 지면효과 및 주익과 무게중심 사이의 수직거리 변화가 인간동력 항공기의 세로 정안정성에 미치는 영향과 수평미익(스테빌레이터) 변위각제어에 따른 세로 동안정성 해석 연구를 수행하였다. 연구결과 지면효과가 정적여유에 미치는 영향은 미미했다. 공력중심과 무게중심 사이의 수직거리가 세로 정안정성에 미치는 영향은 매우 컸으며, 수직거리 증가는 세로 정안정성을 증가시켰다. 수평미익 변위각 제어에 따른 세로 동안정성 해석 결과 장주기 진동특성과 감쇄특성이 매우 나쁜 것으로 나타났다. 향후 항공기의 동특성을 고려한 세로 동안정성 해석 및 측풍에 의한 가로 및 방향 안정성 해석연구를 수행할 예정이다.