• Proceedings of the Korea Water Resources Association Conference
• /
• 2015.05a
• /
• pp.596-596
• /
• 2015

수공구조물 설계의 기본이 되는 설계홍수량은 정상성 (Stationary) 가정 하에 산정되고 있다. 정상성은 분포형의 매개변수들이 시간에 따라 변화하지 않는 것을 의미한다. 그러나 최근 기후변화로 인한 극치사상의 크기와 빈도가 비정상적인 증가 추세를 나타내고 있어 강우자료의 변화 특성을 정확하게 파악하기 위해서는 비정상성 (Non-Stationary)에 대한 고려가 필요한 실정이다. 따라서 본 연구에서는 비정상성을 고려한 미래 IDF (Intensity-Duration-Frequency) 곡선을 산정하고, 기후변화에 의한 IDF 곡선의 특성 변화를 분석하고자 한다. 연구대상지로 충청남도 공주시에 위치한 계룡저수지를 선정하였고, 계룡저수지에 인접한 대전 관측소의 과거 강우자료 (1981-2010년)를 수집하였다. 또한 기상청에서 제공하는 RCP4.5 시나리오 기반의 미래 강우자료를 편의보정하여 3개 기간 (2011-2040년, 2041-2070년, 2071-2100년)에 대한 미래 강우자료를 구축하였고, 지속시간별 연최대치 강우자료를 추출하여 경향성 분석 및 비정상성 빈도해석을 실시하였다. 강우자료의 확률분포형과 매개변수 추정방법으로는 GEV (Generalized Extreme Value)분포와 L-모멘트법을 선정하였다. 이를 바탕으로 과거 및 미래 기간별 IDF 곡선을 산정하였으며, 그 특성을 비교분석하였다. 본 연구에서 도출한 IDF 곡선은 계룡저수지의 설계한도를 재검토하는데 활용될 수 있으며, 본 연구에서 제시한 방법은 기후변화에 따른 농업용저수지의 안정성 검토에 사용할 수 있을 것으로 사료된다.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2015.05a
• /
• pp.628-628
• /
• 2015

유역의 형상은 강우, 산사태 등과 같은 지배적인 침식작용과 더불어 지형 지질학적 요인들에 의해 결정되어 진다. 그러므로 유역형상에 대한 공간특성 분석을 위해서는 지형학적 요인과 다양한 침식작용에 대한 분석이 필요하다. 국내 외 많은 연구결과에 의하면 지형학적 인자에 의한 침식 형태는 국부경사와 집수면적의 크기에 의해 다양한 구간으로 나뉘며, 그 특성에 따라 지표침식, 세굴, 산사태 등으로 구분되는 것으로 연구된 바 있다. 일례로 유역 내 세굴과 관련된 지배인자는 집수면적보다는 국부경사에 반대로 지표침식, 산사태는 국부경사보다는 집수면적의 크기에 따라 영향을 받는다. 따라서 지형학적 인자(국부경사, 집수면적)의 임계치(threshold) 산출을 통해 침식특성(불안정지역)을 검토할 수 있으며, 이에 대한 물리적 검증은 여러 연구를 통해 물질플럭스(유량, 에너지)에 대한 Power Law로써 검증된바 있다. 본 연구에서는 이러한 지형학적 침식특성 분석을 위하여 2006년 집중호우에 의해 광역적 산사태가 발생한 강원도 평창군 진부면 일대의 $10m{\times}10m$ DEM로부터 국부경사, 집수면적을 산출하고 경사-면적한계곡선(Slope-Area Threshold Curve, SATC), 배수면적 확률분포곡선(Probability distribution of Drain Areas Curve, PDAC), 에너지지수 확률분포곡선(Probability distribution of Energy Index Curve, PEIC)를 실제 산사태지점과 중첩하여 도시하였다. 그 결과, 특정 임계구간(Threshold Area, Unstable area, 2~3권역)내에서 산사태 발생지점이 분포하는 것으로 분석되었다. 이를 통해 지형학적 인자만을 고려하여 미계측 유역에 대한 잠재적 불안정지역의 판별이 가능할 것으로 판단되며, 추후 광역적 사면안정해석에 적용 가능할 것으로 판단된다.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2012.05a
• /
• pp.522-522
• /
• 2012

최근 각종 하천 개발 사업이 활발히 진행되면서 안정하도 평가가 활발히 이루어지고 있다. 안정하도 평가를 위해서는 흐름과 하천의 수리기하특성간의 관계를 연결시켜주는 기준유량이 필요한데 이러한 유량이 곧 유효유량이라 할 수 있다. 유효유량은 수년에 결쳐 연 유사량의 대부분을 이동시키는 유량의 평균값으로 정의되며, 적어도 일년에 한 번이나 두 번 또는 대부분의 경우 매년 여러번 발생하는 적당한 빈도의 유량규모에 의해 연 유사량의 대부분을 이동시키는 유량이다. 대표적인 유효유량 산정 프로그램인 Geo-tool은 유황곡선과 유사량 관계 곡선을 활용하여 유효유량을 계산한다. 프로그램에 입력하는 유량은 Bin 수와 지정하는 규칙에 따라 유량구간이 나뉜 후 각 구간별 평균유량에 대한 유사량을 산정한다. 이 때 산정된 구간별 유사량값과 이 구간의 유량이 발생한 일수를 산정함으로써 이 구간의 유량을 통해 발생한 연간 총유사량을 산정한다. 각 구간별 연간 총유사량으로부터 가장 많은 유사량을 이송시키는 구간에 해당되는 평균유량을 유효유량으로 선정하게 된다. 즉 유효유량은 유량범위 간격에 민감하게 반응하므로 Bin의 선정이 중요하다고 할 수 있다. 그러나 국내외에서 Bin 산정에 대한 명백한 기준이 없는 상황이므로 본 연구에서는 Arithmeic Bin과 Logarithmic Bin를 모두 사용하여 낙동강 중류 유효유량 산정에 가장 적합한 Bin의 수와 Bin 간격 산정 규칙을 제시하였다.

• Journal of the Korean Geosynthetics Society
• /
• v.17 no.1
• /
• pp.95-109
• /
• 2018

Recently, GRS (Geosynthetic Retaining Segmental) wall has been widely used as a method to replace concrete retaining wall because of its excellent structural stability and economic efficiency. It has been variously applied for foundation, slope, road as well as retaining wall. The GRS wall system, however, has a weak point that is serious crack of wall due to stress concentration at curved part of it. In this study, therefore, behaviour of GRS wall according to shape of it, shich has convex and concave, are analysed and compared using Finite Element analysis as the fundamental study for design optimization. Results including lateral deflection, settlements of ground surface and wall obtained from 2D FE analysis are compared between straight and curved parts from 3D FE analysis.

• Korean Journal of Environment and Ecology
• /
• v.11 no.2
• /
• pp.160-165
• /
• 1997

The objective of this study was to analyze dominance-diversity of Quercus mongolica community which characterize the boreal-temperate deciduous forest in Korea. Employing the releve method of Muller-Domboes and Ellenberg, 100 quadrats were sampled in the natural forest of Mt. Odae, Mt. Chumbong and Mt. Jungwang in Kangwon-do, where Quercus mongolica community is in the situation of climax or subclimax. On the basis of Braun-Blanquet method, field survey, which accounts ffor the characters of the species structure of Quercus mongolica community, was carried out between 1991 and 1994. Quercus mongolica community was relatively in a stable condition because of the even distribution of its various indices: the species diversity index was 0.4~1.2; the species richness index was 2~11; the evenness index was 0.6~0.9. The dominance-diversity curve were comparatively of lognormal distrivution with a gentle slope in all communities. The species sewuence curve for Quercus mongolica - Lindera obtusiloba community had relatively a steep slope, which meant that the evenness of the community would be low. The species sequence curve for Quercus mongolica - Carpinus cordata community had a slow slope, which meant that the evenness and the stability of the community would be high.

• Korean Chemical Engineering Research
• /
• v.43 no.1
• /
• pp.33-38
• /
• 2005

The distribution of vanadium and iron ionic species in the presence of picolinate ligand has been simulated at various conditions with different pH values and compositions in the decontamination waste solution. In spite of variations of metal concentration in the decontamination solution, the shape of distribution diagrams were not changed greatly at both high (the molar ratio of picolinate to vanadium is 6) and low (the molar ratio is 3) LOMI decontamination conditions. However, in the solution of low-picolinate condition the shape of the distribution diagram of iron(II)-picolinate complexes was changed significantly. This phenomenon is attributed to the shortage of relative amount of picolinate ligand to iron existed in the solution, and originated from the difference in stability constants for complexes formed between vanadium(III) and iron(II) species with picolinate ligand. The distribution diagrams obtained in this study can be applied very usefully to the prediction or understanding the reaction phenomena occurred at various conditions in the course of the LOMI waste treatments such as an ion exchange operation.

• Journal of the Korean Society for Railway
• /
• v.12 no.5
• /
• pp.678-686
• /
• 2009

A trial run of locally-developed tilting train has been in process on Chungbuk line since the test vehicle was first produced. For the system stabilization, interface verification among the systems including track, structure, catenary and signaling system, not to mention the rolling stock, is very crucial. Therefore, in this study, the dynamic rail force of the tilting (Hanvit 200), high-speed (KTX) and general (Mugunghwa) vehicle caused by driving in transition curve track was measured. And, it compared the tilting response with the other by using the measured rail force data in transition curve track, and then evaluated probability the range of load fluctuation for the variable dynamic vertical and lateral wheel load. As a result, a range of rail force by occurred a change of cant from the high-speed and general vehicle which had fixed bogie structure was distributed throughout small deviation. Otherwise, in case of the tilting train which was consisted of the pendulum bogie structure was distributed wide range about large deviation by changed of cant.

• Journal of the Korea Concrete Institute
• /
• v.26 no.3
• /
• pp.267-275
• /
• 2014

Recently, the construction of curved bridge has increased, thus researchers perform the analytic studies on PSC curved bridge. However, the grid analysis method that are mostly used in the construction industry is not adequate to acquire the precise behavior evaluation of curved PSC briges. Therefore, the precise finite element analysis considering the effective variables were performed to establish the basis for the design method of curved PSC bridge by using 3D elements and bar element. The evaluated variables in this analysis were the number of girders, loading point, section figure, change of prestressing force. The results show the load carrying capacity of the 3 girder type bridge is 200% of that of the 2 girder type, and that applying load on outer girder makes the load resistance capacity and the deflection deviation of 2 girders smaller. The structural capacity of the bridge is improved when the section size is increased, but the efficiency of it is not sufficient enough compare to that of the change of prestressing forces. The change of prestressing forces shows that the camber and the load carrying capacity are linearly increased as PS force is increased. Moreover, when the PS force applied on outer girder is increased than that of inner girder, the deviation of deflection the girders decreases, thereby the stability of the bridge is enhanced.

• The Journal of Engineering Geology
• /
• v.18 no.4
• /
• pp.523-535
• /
• 2008

A simulated rainfall system was built, and the unsaturated characteristics were examined by execution of simulated rainfall system test and soil water characteristic curve cell test(SWCC Cell Test) under the various rainfall and slope conditions. With the results, the applicability of infiltration behavior under rainfall and soil water characteristic curve models to the unsaturated weathered granite soil was examined. At the results of comparison the volumetric water content and matric suction measured in the wetting process(under rainfall) with those in the drying process(leaving as it was) of the simulated rainfall system, the volumetric water content showed a difference of $2{\sim}5%$ and matric suction of about $3{\sim}10\;kPa$, indicating the occurrence of hysteresis. In addition, the difference was relatively larger in matric suction than in the volumetric water content, and this tells that the hysteresis behavior is larger in matric suction. When the soil water characteristic curve derived from measurements in simulated rainfall system test were compared with those from the soil water characteristic curve cell test, both methods produced soil water characteristic curves close each other in the wetting process and the drying process, but in both, there was a difference between results obtained from in the wetting process and those from in the drying process. Thus, when soil water characteristic curves are rationally applied to the design and stability analysis considering of the properties of unsaturated soil, it is considered desirable to apply the soil water characteristic curve of the wetting process to the wetting process, and that of the drying process to the drying process.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.34 no.6
• /
• pp.1731-1741
• /
• 2014

Recently, many overpasses, highway, and advanced transit systems have been constructed to distribute the traffic congestion, thus small size of curved bridges with small curvature such as ramp structures have been increasing. Many of early curved bridges had been constructed by using straight beams with curved slabs, but curved steel beams have replaced them due to the cost, aesthetic and the advantage in building the section form and manipulating the curvature of beams, thereby large portion of curved bridges were applied with steel box girders. However, steel box girder bridges needs comparatively high initial costs and continuous maintenance such as repainting, which is the one of the reason for increasing the cost. Moreover, I-type steel plate girder which is being studied by many researchers recently, seem to have problems in stability due to the low torsional stiffness, resulting from the section characteristics with thin plate used for web and open section forms. Therefore, in recent studies, researchers have proposed curved precast PSC girders with low cost and could secured safety which could replace the curved steel girder type bridges. Hence, this study developed a Smart Mold system to manufacture efficient curved precast PSC girders. And by using this mold system a 40 m 2-girder bridge was constructed for a static flexural test, to evaluate the safety and performance under ultimate load. At the manufacturing stage, each single girder showed problems in the stability due to the torsional moment, but after the girders were connected by cross beams and decks, the bridge successfully distributed the stress, thereby the stability was confirmed. The static loading test results show that the initial crack was observed at 1,400 kN when the design load was 450 kN, and the load at the allowable deflection by code was 1,800 kN, which shows that the safety and usability of the curved precast PSC bridge manufactured by Smart Mold system is secured.