• Journal of Korean Society of Steel Construction
• /
• v.12 no.2 s.45
• /
• pp.221-230
• /
• 2000

Checking the stability of anisotropic plates with free edges, it is impossible that buckling loads and modes are found via existing classical methods about various loads and boundary conditions. For solving this problems. finite difference method(FDM) is used to analyze the buckling behaviors for arbitrary boundary conditions. Using FDM, it is difficult to treat the fictitious points on free edges. So, this paper analyzes buckling behaviors of analytic models with one edge free and the other edges clamped and with opposite two edges free and other two edges clamped. The various buckling loads and mode characteristics through numerical results are given for buckling behaviors of anisotropic plates on free edges.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.39 no.9
• /
• pp.805-815
• /
• 2011

Nonlinear Parabolized Stability Equations(NSPE) can be effectively used to study more throughly the transition process. NPSE can efficiently analyze the stability of a nonlinear region in transition process with low computational cost compared to Direct Numerical Simulation(DNS). In this study, NPSE in general coordinate system is formulated and a computer code to solve numerically the equations is developed. Benchmark problems for incompressible and compressible boundary layers over a flat plate are analyzed to validate the present code. It is confirmed that the NPSE methodology constructed in this study is an efficient and effective tool for nonlinear stability analysis.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.13 no.6
• /
• pp.1330-1338
• /
• 1989

본 연구에서는 직각밀폐용기의 수평경계면이 단열인 경우뿐만 아니라 등온 조건을 갖는 경우에 대해 실험적으로 연구하여 경계조건의 변화가 직각밀폐용기내 흐름 및 열전달에 미치는 영향, 특히 등온조건을 갖는 경우 수직 온도차에 따르는 안정온도 구배효과로 예상되는 흐름의 억제, 지연효과를 작종 물리적 변수들의 영향과 함께 세밀히 조사하였다.

• Journal of the Korean Geotechnical Society
• /
• v.20 no.4
• /
• pp.29-38
• /
• 2004

A finite element nonlinear stress-deformation model with multi-interface element is applied to the stability analysis of waste landfill slope. Strength parameters of waste and geosynthetic materials are obtained from the triaxial test of waste and the direct shear test of geosynthetics, respectively. The landfill models used for the numerical models are fit to regulations of the Korean waste management law. The results of the strength tests showed linear behavior for the waste and nonlinear behavior for the eosynthectic materials. The stability analysis with multi-interface element for the geosynthetic materials in the liner system showed large shear stress and slippage at the boundary of the foundation and the slope of the waste fill. This analysis verified the necessity of multi-interface analysis for waste landfills with composite liners.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.25 no.2
• /
• pp.175-182
• /
• 2012

In this paper we are concerned with the performance of structural stability of torsion in square cross section of a beam with holes. The critical load is defined as the smallest load at which the equilibrium of the structure fails to be stable as the load is slowly increased from zero. The beams subjected to torsion are frequently encountered in general structures and these forces influence to the stability of structure. The boundary element method is found to be very efficient and accurate for the analysis of torsion problems including complex boundary conditions with respect to its simplicity and generality. In this paper, it is required to derive the boundary element formulation for torsion problem and integrate directly on the discrete boundary. To investigate the validity of the developed computer program, three distinctly solid cross-sections which are elliptical, rectangular and triangular one are analyzed, and comparisons are made with analytical approaches where these can also be used.

• Proceedings of the Korean Society of Coastal and Ocean Engineers Conference
• /
• 1992.08a
• /
• pp.72-76
• /
• 1992

평면파 수치모형 해석시 가상경계에 평행한 입사각을 갖거나, 다방향의 입사파가 가상경계로 동시에 입사되는 경우에는 무처리 시 수치 반사가 발생되므로 해에 악영향을 미친다. 따라서 이러한 경우에 대해 가상경계에서 파랑 Energy 투명하게 통과시키는 고차원 무반사 경계조건에 대해 연구하였다. 이들 조건식의 수학적 안정성을 분석하기 위해 phperbolic system에서 normal-mode 분석을 수행하였다. 1차 및 2차의 고차원 무반사 경계조건을 Galerkin 가중잔차법을 이용 유한요소 모형에 적용하였으며 이들에 대한 특성을 시험하기 위해 수치실험을 실시하였다.

• Proceedings of the Korean Society for Rock Mechanics Conference
• /
• 2007.03a
• /
• pp.234-242
• /
• 2007

불연속면을 따라 점토 등의 충전물이 포함된 경우에는 불연속면의 방향이 유리하게 작용하 더라도 사면안정에 불안정성을 초래한다. 연구지역의 사면활동은 점토충전물과 풍화토의 경계를 따라서 발생하였다.이것은 물성의 차이를 보이는 경계부분이 존재했기 때문이며,암석에서 엽리 등이 구조적 운동에서 약대로 작용하여 층간의 슬립을 유도하는 현상과 매우 유사하다. 대부분의 해석에서 점토충전물이 존재할 경우에는 하나의 불연속면으로 설정하여 해석한다. 이때의 불연속면은 점토층 내에서의 활동면으로 해석되므로 점토와 원지반과의 경계부에서의 해석 값과는 상당한 차이를 보이게 되고 점토의 물리적 성질에 많이 지배된다. 점토충전물로 인한 활동사면의 안정성 평가 결과는 충전물에 의한 불연속면의 파괴유형에 따른 강도정수에 의해 안전율에 상당한 차이를 보인다.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.34 no.1
• /
• pp.1-7
• /
• 2006

Linear stability analysis of 2-dimensional wall jet is conducted by using parabolized stability equation (PSE). Wall jet is found to be modelled well by boundary layer approximation except for the neighborhood of the nozzle exit, and the introduction of local similarity variable makes the streamwise basic flow Reynolds number independent. Stability characteristics of the wall jet obtained

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.38 no.5
• /
• pp.403-413
• /
• 2010

Transition location of boundary layers over airfoils is predicted by using PSE(Parabolized Stability Equations) and $e^N$-method. Growth rates of disturbances are obtained from the PSE analysis and the N-factor curves are calculated by integrating the growth rates. The computational code developed in the present study is validated by comparing the computed results with the well known data for the cases of flat plate boundary layers and airfoils. Predictions of transition location are made for the boundary layers over NACA0012, NLF(1)-0414F, and NLF(1)-0416 airfoil. Predicted transition locations are found to be in good agreement with the experimental data.

• Journal of the Korean GEO-environmental Society
• /
• v.13 no.8
• /
• pp.65-73
• /
• 2012

Soil-rock interface, mainly founded in Granite region of Korea, is known as one of the important factor of the slope failure at the rainfall due to smaller shear strength than soil itself. However, research of the effect on slope stability by soil-rock interfaces is insufficient. Therefore, a series of direct shear tests were performed in order to investigate the effect of soil-rock interface on slope stability. The method of tests is to get sand itself and sand-artificial rock interface shear strength from different grain size of sands and artificial rock samples. The results of tests show that the friction angle of interface depends primarily on particle size and surface roughness. Interface friction angle ratio ${\mu}(={\delta}/{\Phi})$ is in the range of 0.75 ~ 0.96, this results indicate that interface friction angle is smaller than sand itself.