• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2012년도 제42회 동계 정기 학술대회 초록집
• /
• pp.311-311
• /
• 2012

Boron carbide (B-C) 박막은 높은 경도, 열적 안전성, 화학적 안전성이 우수한 하드 코팅 소재로 사용되고 있다. 우수한 특성을 가지는 B-C 박막에 대한 연구는 B4C 비전도성 타겟을 이용하여 RF Sputtering 법으로 증착 공정변수에 대해서 박막의 물성에 관해 일부 연구자들이 진행하였으나, Pulsed dc margnetron sputtering 법으로 증착 공정변수에 대한 물성의 연구는 미진하였다. 반면에, DLC 박막은 우수한 특성을 가지는 하드 코팅 소재이나 400도 이상에서는 내열성이 떨어지는 단점을 가지고 있다. 연구에서는 B-C 박막의 내열성이 우수한 특성을 이용하여 DLC 박막의 내열성을 높이기 위한 목적으로 B-C 박막과 DLC 박막을 다층막으로 제조함으로서 DLC 박막을 구조적으로 안정화를 시키고자 하였다. 그리고 비전도성 B4C 타겟으로 Pulsed dc 마그네트론 스퍼터링법을 이용하여 증착기술을 개발하기 위해서 공정압력과 인가전력에 따른 B-C 박막을 제조하여 그 물성을 조사하였고, B-C/DLC 다층막을 제조하여 DLC 박막의 내열성을 증가시키고자 하였다. B-C 박막과 B-C/DLC 다층막의 경도와 탄성율은 나노인덴테이션과 마이크로 비커스를 이용하였으며, 박막의 성장구조와 박막의 구조를 조사하기 위해 SEM과 FTIR 및 XRD 을 이용하여 측정하였다.

• 대한안전경영과학회:학술대회논문집
• /
• 대한안전경영과학회 2011년도 춘계학술대회
• /
• pp.559-570
• /
• 2011

생산재와 소비재의 반제품을 이루고 있는 플라스틱 부품들이 다른 소재의 제품들을 대체하면서 급속히 증가하고 있다. 이는 사출성형의 공정으로 생산되는 제품들이며 플라스틱의 기능과 특성이 우수하다는 장점과 더불어 제품구현이 빠르고 대량생산이 가능하기 때문이기도 하다. 본 연구에서는 제조설비시스템(MES)를 임베디드 장치를 장착하여 플라스틱 사출금형으로 반제품을 생산하는 과정에서 공정상에 발생하는 이상 증후에 대한 진단과 장시간 생산이 진행되는 과정에서 사출성형조건의 지속성 유지의 문제점을 실시간으로 모니터링하여 예방과 대책 방법을 제시한다. 품질이상을 감지하기 위해 온도, 압력, 시간을 측정하기 위한 센서와 인터페이스 설계를 통해 작업자의 판단상황을 객관적으로 설치전과 후의 경제성 분석을 하였다.

• 대한안전경영과학회:학술대회논문집
• /
• 대한안전경영과학회 2010년도 춘계학술대회
• /
• pp.61-69
• /
• 2010

The users who use the wheelchair are confined to a wheelchair for a long time. Accordingly, the use of seat cushion for pressure distribution is very important in order to prevent a bedsore. Therefore, this paper provides useful information for design of seat cushion through statistical testing among nothing cushion, low cell type of air cushion, high cell type of air cushion, and jelly type of air cushion. It turned out that the jelly type and high cell type of air cushion have a serious effect on decision and design of seat cushion.

• 한국원자력학회:학술대회논문집
• /
• 한국원자력학회 1998년도 춘계학술발표회논문집(1)
• /
• pp.596-602
• /
• 1998

한국의 차세대 원자로 (Korean Next Generation Reactor; KNGR)에 처음 적용되는 격납건물내에 설치된 재장전수조 (In-Containment Refueling Water Storage Tank; IRWST)는 기존 재장전수조의 기능외에 주입모드에서 재순환 모드를 전환생략, 일차계통으로 방출된 고온, 고압 냉각수의 응축 및 냉각 격납용기 방사능 오염방지, 원자로 동공층수 등 여러 가지 추가 기능을 가진 한층 진보된 설계개념이다. 발전소 천이사고 시 발생하는 Pipe Clearing, 응축진동 현상(Condensation Oscillations), Chugging 등의 열수력 현상들이 방출증기의 유동 및 가속도와 관련해 항력과 응력, 압력진동 등을 일으켜 IRWST 구조물에 영향을 미칠 수 있기 때문에 IRWST를 처음으로 시도하는 우리 나라로서는 이와 관련된 제반현상에 대한 심도 깊은 연구가 요구된다. 따라서 본 연구에서는 원자력 발전소 과도로 인한 가압기 안전밸브(Pressurizer Safety Valve) 또는 안전감압밸브(Safety Depressurization Valve) 작동시 IRWST로 방출되는 유체로 야기되는 하중 예측 모델을 기존의 BWR의 응축수조(suppression Pool)에서 일어나는 각종 현상을 토대로 이론적으로 체계적으로 유도하여 이를 비교, 분석하였다.

• 한국안전학회지
• /
• 제16권4호
• /
• pp.22-28
• /
• 2001

Heat transfer and pressure distribution for heat exchanger type of domestic gas boiler are different from shape, pitch, thickness of fin and array of pipe respectively. In order to measure the pressure distribution across the heat exchanger, a suction type wind tunnel was constructed and velocity distribution was measured for pilot tube(4 point) of rack type. The experiments were performed for 5 different air flow mass, rpm=3,6,9,12,15 and transverse axis of heat exchanger(x-length) is 5cm respectively. Results showed that above 9.5m/s, pressure distribution dispersion for wet type of heat exchanger is on the increase and above 5.5m/s, pressure distribution dispersion for dry type of heat exchanger is on the increase. Also, pressure distribution dispersion by comparing two different types heat exchanger, dry type of heat exchanger showed a higher augmentation than wet type of heat exchanger.

• 한국안전학회지
• /
• 제16권4호
• /
• pp.29-38
• /
• 2001

The purpose of this paper is to evaluate the structural integrity of a reactor pressure vessel subjected to the pressurized thermal shock(PTS) during the transient events, such as main steam line break(MSLB) and small break loss of coolant accident(SBLOCA). For postulated surface or subsurface cracks, variation curves of stress intensity factor are obtained by using the three different methods, including ASME section XI code anlysis, the finite element alternating method and the finite element method. From the stress intensity factor curves, the maximum allowable nil-ductility transition temperatures(RT/NDT/) are determined by the tangent criterion and the maximum criterion for various crack configurations and two initial transient events. As a result of the analysis, it is noted that axial cracks have smaller maximum allowable RT$_{NDT}$ values than same-sized circumferential cracks for both the transient events in the case of the tangent criterion. Axial cracks have smaller RT$_{NDT}$ values than same-sized circumferential cracks for MSLB and circumferential cracks have smaller values than axial cracks for SBLOCA in the case of the maximum criterion.

• 한국안전학회지
• /
• 제16권3호
• /
• pp.26-30
• /
• 2001

Creep crack growth lift of high temperature pressure equipments was assessed for various crack locations and for various material properties. Surface cracks at the inner and outer surface of the vessel in the axial and circumferential directions were considered. The crack was located in the weld metal, in the parent metal or at the weld interface. Results shored that the crack at the weld interface was the most dangerous one. The crack located outside is weaker than that located inside. Safety factors of the case in which improper material properties were used the to unavailability of the correct material properties were discussed.

• 한국안전학회지
• /
• 제5권3호
• /
• pp.8-26
• /
• 1990

It is important to have exact information about the contact pressure distribution in the design of connected parts of machines and structures. In previous works, stress analyses on a two body contact problem have been carried out in large numbers. Besides, the measurement of contact stress is important to confirm the adequateness of the theoretical analysis, to verify appropriateness of Hertzian contact theory and to know the practical pressure distribution, but an excellent measuring method con't be found at present. Therefore, a quantitative measurement of contact pressure by means of ultrasonic waves using a normal probe and an angle has been proposed to measure the contact pressure distribution between two rough flat surfaces. At first, in a new proposed calibration method, the relation between mean contact pressure and sound pressure of reflected waves is obtained by using calibration blocks with various surface roughnesses made of the same material as the rectangular section beams And then, this experimental results are compared with the analytical ones, and the utility of this method is discussed.

• 한국안전학회지
• /
• 제18권4호
• /
• pp.16-22
• /
• 2003

Generally the rupture of steam generator tubes proceeds from significant plastic deformation before failure. In this study, the burst pressures of damaged steam generator tubes were calculated from the plastic instability analysis with the finite element method. Two wear types, flat and circumferential types were considered. An equation for the burst pressure was proposed by using the strength reduction factor and the Svensson equation. The analysis results were compared with the experiment data from published references and they showed a good agreement with the experiment data.

• 한국안전학회지
• /
• 제18권4호
• /
• pp.28-34
• /
• 2003

In the present study, three-dimensional finite element analysis was performed to investigate the effects of internal wall thinning defect on the failure pressure of elbow in the piping system and to develop the failure pressure evaluation model. From the results of finite element analysis, the failure pressure was derived by employing local stress criteria, and the effects of thinning location, bend radius, and defect geometry on the failure pressure of internally wall thinned elbow were investigated. Also, based on these investigations and previous model developed to estimate the failure pressure of elbow with an external pitting defect, the failure pressure evaluation model to be applicable to the elbow containing an internal thinning defect was proposed and compared with the results of finite element analysis. The failure pressure calculated by the model agreed well with the results of finite element analysis.