• Proceedings of the Korea Water Resources Association Conference
• /
• 2023.05a
• /
• pp.438-438
• /
• 2023

최근 전 세계적으로 기후변화가 심해지고 있어 자연재해 또한 늘어나고 있다. 많은 자연재해 중 겨울철 재해인 대설 피해는 2012년부터 2021년까지 10년동안 약 1,200억의 피해액이 발생하였고 많은 재산 피해의 위험이 있어 지속적인 연구가 필요하다. 그 중 충남지역의 피해액은 약 200 억으로 우리나라의 피해액 중 두 번째로 많다. 따라서 본 연구에서는 PSR(Pressure Index, State Index, Response Index)과 DPSIR(Driver force Index, Pressure Index, State Index, Impact Index, Response Index) 방법을 이용하여 충남지역의 대설에 대한 취약성을 분석하여 더 신뢰할 수 있는 대설 위험지역을 제시하였다. PSR 방법은 압력지수, 상태지수, 반응지수로 구분되고, DPSIR 방법은 추진력, 압력, 상태, 영향, 대책 지수로 나뉜다. 각 지표에 해당하는 데이터베이스를 구축하고 엔트로피 방법을 이용하여 가중치를 산정하고 충남지역의 대설 취약성 지수를 산출하였다. 2018년부터 2022년까지 최근 5년 동안의 충남지역의 대설피해를 기준으로 PSR(Pressure Index, State Index, Response Index)과 DPSIR(Driver force Index, Pressure Index, State Index, Impact Index, Response Index) 방법을 이용하여 산출한 지수를 비교한 결과 DPSIR(Driver force Index, Pressure Index, State Index, Impact Index, Response Index) 방법을 이용하여 산출된 취약성 지수가 더 신뢰할 수 있는 결과를 보였다. 본 연구의 결과 대설피해 발생 시 대설 위험지수가 높은 지역을 선제적으로 대비할 수 있고 효율적인 제설대응체계를 구축할 수 있을 것으로 기대된다.

• Proceedings of the Korean Society of Computer Information Conference
• /
• 2020.01a
• /
• pp.163-164
• /
• 2020

교통 신호등 자동 제어시스템 기술은 교통 체증 현상을 방지하고 횡단 보도를 건너는 보행자들의 안전을 목적으로 시작되었다. 이는 1가구당 2차량에 가까운 보급률을 보이고 있는 현대 사회에 불가피하게 생기는 문제인데 본 연구에서는 이러한 문제로 인한 교통 신호등 자동 제어시스템 기술을 적용하고자 한다. 사거리에서 운전을 하다 보면 차량이 많이 지나가는 차선이 있는 반면 비교적 차량이 많이 지나가지 않는 차선들을 볼 수 있다. 이런 경우 차량이 많은 차선은 신호시간 내 차량이 모두 지나가지 못해서 교통체증이 발생하게 된다. 교통 체증을 최소화하기 위해서 압력 센서를 설치하여 차량이 많이 정체 되고 있는 차선에 신호의 시간을 증가시켜주고 차량이 많이 없는 차선은 기본 신호의 시간을 주어 차량이 많이 있는 차선의 차들의 교통 체증을 해소시켜 준다. 그리고 차량이 많이 지고 스마트폰의 보급이 많아지다 보니 횡단 보도에서 스마트폰을 보고있다 횡단 보도에서 사고를 당하는 경우 증가하고 있다. 이러한 보행자들을 위해 횡단 보도의 신호가 초록불이 되었을 때 간단한 음악이 나오고 발 밑에 횡단 보도 신호등과 같은 색깔이 나오게 하는 LED를 설치한다. 이렇게 하여 초록불이 들어왔다는 것을 보행자들에 인식시켜 보행자들의 안전을 지킬 수 있다.

• Transactions of the Korean Society of Pressure Vessels and Piping
• /
• v.19 no.1
• /
• pp.52-59
• /
• 2023

The welding part of the valve needs immediate action when leakage occurs due to cracks or damage. In order to repair leakage of the welding part, the valve must be separated from the pipe or replaced with a new valve. However, it is difficult to remove the valve while operating the power plant. This study presents a method to remove leakage by precisely processing the gap between the clamp and the incision part within 0.1mm while installed in the pipe system. If the external leakage is removed using a clamp on the welding part without removing the valve during operation, the time and cost required for maintenance can be reduced.

• Transactions of the Korean Society of Pressure Vessels and Piping
• /
• v.19 no.2
• /
• pp.130-139
• /
• 2023

This paper examines the quantification of uncertainty for welding residual stresses in dissimilar metal welds used in nuclear power plants. A mock-up of a dissimilar metal weld pipe, consisting of carbon and stainless steel pipes, was fabricated to measure the residual stress. A Round-Robin analysis was conducted by Korean institutions to assess the welding residual stress. The analysis was carried out in the second order, and the data obtained by each institution was evaluated based on the information provided. Using the Round-Robin results, the distribution of uncertainty in welding residual stresses among Korean institutions was evaluated. The quantification of uncertainty for Korean institutions was found to have a wider range compared to the distribution of welding residual stresses observed in overseas institutions. This study is considered useful in the establishment of comprehensive strategies for evaluating welding residual stress analysis methods used by domestic institutions.

• Journal of Biomedical Engineering Research
• /
• v.19 no.6
• /
• pp.603-609
• /
• 1998

To anlyze the diffuse axonal injury of the human brain, 3-D finite element models of the adult, two and three years child were developed. Triangular type acceleration which had its maximum value 200g was applied to investigate the effects of acceleration direction and duration time. The pattern of high shear stress generated at the brain stem, pones and midbrain was similar to the pattern of DAI seen in the clinical observation, especially high maximum shear stress was detected in the brain stem of the six year old child model under flexional acceleration. As the duration of acceleration increased generated pressure and maximum shear stress also increased. For the children's model relatively small pressure was generated regardless of the acceleration direction and continued much longer compared with adult's model. From this analysis maximum shear stress was revealed more proper indicator to predict DAI compared to HIC in case of angular acceleration loading.

• Journal of the Korean Society of Safety
• /
• v.19 no.4 s.68
• /
• pp.150-154
• /
• 2004

Gas explosion characteristics of hydrogen and liquefied petroleum gas(LPG) were measured in 6L cylindrical vessel, and experiment for explosion to fire transition phenomena of the gases were carried out using the 270L vessel. Explosion characteristics were measured using the stain type pressure transducer and explosion to fire transition phenomena was analyzed with the hish-speed camera. Base on the experiment, it was found that explosion pressure was most high slightly above the stoichiometric concentration, and explosion pressure rise rate and flame propagation velocity were proportional to the combustion velocity. And we find that those kind of explosion characteristics affect the explosion-to-fire transition, in addition, explosion flame temperature, flame residence time, are important parameters in explosion-to-fire transition.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.17 no.1
• /
• pp.29-37
• /
• 2011

PIV measurements of the velocity field, pressure field, vorticity, and turbulent intensity in the rear of curved section of an oil fence with current speed showed that the flow directions in the rear of flow boundary area were similar to those in the front of it. As the current speed increased, the patterns of pressure distribution were changed, and the turbulent flow became more irregular. CFD simulations under the same conditions as the PIV tests showed that the flow patterns of the wake were similar to those by PIV tests in speed of 0.3 m/s and less, but were distinctively deviated from those in 0.4 m/s due to the flexibility of the oil fence, which was not properly taken care of in CFD modeling.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.20 no.5
• /
• pp.79-88
• /
• 2020

This paper propose the method to drive a solar panel cleaning robot efficiently on an inclined panel using vacuum pad pressure. In this method, the rubber pads using the vacuum pressure are used to attach robot body to the panel surface. By applying the linkage mechanism to the vacuum pads, it was possible to reduce robot weight and power consumption and to prevent slipping of the robot. In addition, the use of solenoid valves, proximity sensors, and encoders to detect movement of the robot body and the control of the pad pressure dedicate to the driving of the robot on an inclined panel. In order to move the robot forward, the operation sequence of multiple solenoid valves was completed, and the six vacuum pads mounted to both legs were accurately controlled to form vacuum and atmospheric pressure in right order so that the robot could move forward without slipping. At last, it was confirmed through experiments that straight-forward moving and rotational movement could be performed up to 36 degrees of inclination angle of solar panel.

• Journal of the Korean Society of Safety
• /
• v.25 no.6
• /
• pp.92-97
• /
• 2010

A study is conducted on thermal characteristics of biodiesel which is already being produced in many countries because of its stable supply of energy in non oil-producing countries and economical benefits against increasing oil price, and environment conservation. So biodiesel has been used as important energy source in the fuel fields and a mount of production has increased year by year. Therefore, it is very important to find out the thermal characteristics of biodiesel for ignition temperature, maximum pressure and thermal behavior. The purpose of this study is to compare on thermal characteristics of biodiesel, petroleum diesel and those mixtures. Also, the main study was performed by flash point testers and modified closed type of pressure vessel test (MCPVT). Based on the data of flash point and MCPVT, the ignition temperature and the maximum pressure of biodiesel was $182^{\circ}C$ and 40.1bar, and petroleum diesel was $54^{\circ}C$ and 29.8bar.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.25 no.7
• /
• pp.968-973
• /
• 2019

This study presents the characteristics of a pressure drop and uniformity index for a particulate matter reduction device with a perforated plate and mixer for marine diesel engines. The perforated plate and mixer equipped on the particulate matter reduction device induce an increase of exhaust gas reduction performance by increasing the uniformity index. Whereas, the perforated plate induces pressure drop increases in the particulate matter reduction device. Therefore to calculate the effect of the uniformity index and pressure drop of the perforated plates and mixer, this study combines several cases using five types of perforated plates and one type of mixer. Consequently, these results were analyzed to determine the optimized type and position of the perforated plate and mixer.