• 제목/요약/키워드: 안전 압력

검색결과 937건 처리시간 0.029초

차량내 잔류 아동 감지 시스템 (Detection system for Residual children in vehicle)

  • 류환규;서의현
    • 한국정보통신학회:학술대회논문집
    • /
    • 한국정보통신학회 2018년도 춘계학술대회
    • /
    • pp.563-564
    • /
    • 2018
  • 최근 차량 내 잔류 어린이 사고가 빈번히 발생하고 있다. 이를 예방하기 위하여 어린이 안전교육과 더불어 안전장치의 보완이 필요하다. 본 논문은 유치원생들이 스쿨버스를 하차한 후 미처 내리지 못한 아동들의 움직임, 압력, 음성의 이벤트를 감지함으로써 잔류 어린이들의 차량사고를 방지할 수 있는 시스템을 제안하였다.

  • PDF

고온 고압의 유체 수송에 의한 해저 파이프의 수직 좌굴 현상 (Upheaval Buckling of Offshore Pipelines due to the Transportation of High Pressure and High Temperature Liquid)

  • Hyun-Mo Son;Si-Young Kim;Han-Suk Choi
    • 한국해양공학회지
    • /
    • 제16권1호
    • /
    • pp.52-57
    • /
    • 2002
  • 본 논문은 고온 고압의 유체를 수송하는 해저 파이프의 좌굴 현상에 대해서 논하였다. 고온 고압의 유체를 해저 파이프로 수송 할 때, 수송되는 고온 고압의 유체와 수위 해저의 온도와 압력들의 차에 의해서 유체 수송 파이프는 축 방향으로 압축력을 받게 되고 이 압축력을 견디지 못하면 수송 파이프는 수직 방향의 좌굴 현상이 발생하게 된다. 논문에서는 "semi-empirical design method"를 사용하여 수송 유체의 온도와 압력의 여러 가지 변화에 따라 파이프의 축 방향 압축력을 계산하고 수직 좌굴 현상에 따른 안전계수를 구하여 파이프의 초기 설계 결정에 도움을 주고자 했다.

원전 안전 3등급 고밀도 폴리에틸렌 매설 배관 맞대기 열 융착부의 굽힘 피로특성 평가 (Investigation of Bending Fatigue Behaviors of Thermal Butt Fusion in Safety Class III High-Density Polyethylene Buried Piping in Nuclear Power Plants)

  • 김종성;이영주;오영진
    • 한국압력기기공학회 논문집
    • /
    • 제11권2호
    • /
    • pp.40-44
    • /
    • 2015
  • The fatigue behavior of thermal butt fusion in safety class III high-density polyethylene (HDPE) buried piping for nuclear power plants was investigated using load-controlled bending fatigue on four-point bend test specimens. Based on the results, the presence of thermal butt fusion beads was confirmed to reduce the fatigue lifetime in the low- and medium-cycle fatigue regions while having a negligible effect in the high-cycle fatigue regions.

벼의 압력손실 및 호흡 모델과 자동통풍에 관한 연구 (PRESSURE DROP, RESPIRATION MODELS AND AUTOMATIC AERATION OF ROUGH RICE)

  • 정종훈;라리 알 버어마
    • Journal of Biosystems Engineering
    • /
    • 제16권3호
    • /
    • pp.298-311
    • /
    • 1991
  • 빈 시스템에서 적정 팬을 선정하기 위해서, 빈에서 벼를 건조 혹은 통풍시킬 때 벼의 저항에 의해 발생되는 공기의 압력손실을 예측하는 모델을 개발하였다. 또한 벼의 건물 손실을 예측하기 위하여 벼의 호흡 모델을 개발하였다. 그리고 온도 및 습도 센서들을 이용한 자동계측 시스템을 사용하여 저장된 벼의 상태를 연속적으로 측정, 분석함으로써 벼의 통풍기준을 결정하고 이를 근거로 빈의 자동통풍 시스템을 개발하여 평가하였다. 공기의 정압 손실은 공기의 속도 및 벼의 함수율의 함수로서 나타내어졌으며, 일정 곡물 깊이에서 벼의 함수율이 낮을수록 그 정압손실은 증가하였다. 벼의 호흡에 의해 발생되는 이산화탄소의 양은 저장온도, 벼의 함수율, 저장 기간의 함수로서 나타낼 수 있었다. 벼의 안전 저장을 위해 곡물의 온도 및 함수율, 평형상대습도, 벼의 품질저하지수(deterioration index)에 대한 자동통풍 기준을 결정하였으며 이들을 이용해서 퍼스널 컴퓨터로 팬, 제습기 등의 통풍 장치들을 자동제어하는 자동통풍 시스템을 개발하였다. 이 시스템은 곡물의 상태를 예측, 제어함으로써 14% 이하의 함수율과 4이하의 품질저하지수, 그리고 어떤 균류도 생성시키지 않음으로써 벼를 안전하게 저장할 수 있었다.

  • PDF

설계초과 지진에 대한 원전 지진안전성 평가기술 고찰 및 제언 (Review and Proposal for Seismic Safety Assessment of Nuclear Power Plants against Beyond Design Basis Earthquake)

  • 최인길
    • 한국압력기기공학회 논문집
    • /
    • 제13권1호
    • /
    • pp.1-15
    • /
    • 2017
  • After Kyeongju earthquake occurred in September 12, 2016, the seismic safety of nuclear power plants became important issue in our country. The seismic safety of nuclear power plant against beyond design basis earthquake became very important to secure the public safety. In this paper, the current status of the seismic safety assessment methodology is reviewed and some aspects for the reliability improvement of the seismic safety assessment results are proposed. Seismic margin analysis and probabilistic seismic safety assessment have been used for the seismic safety evaluation of a nuclear power pant. The basic procedure and the related issues and proposals for the probabilistic seismic safety assessment are investigated.

연소실 직접분사식 성층급기 가솔린기관의 구동안정성에 관한 연구 -열방출율과 도시평균유효압력 변동에 미치는 연료분사압력과 부하변동의 영향- (A Study on Driving Stability of In-cylinder Direct Injection Stratified Charge Gasoline Engine - Effects on HR rate and $COV_{imep}$ of Fuel Injection Pressure and Load Variations -)

  • 이상만;이근오
    • 한국안전학회지
    • /
    • 제13권3호
    • /
    • pp.3-10
    • /
    • 1998
  • In general, the stratified charge for direct injection gasoline engine should be introduced to achieve ultra-lean combustion scheme. In order to apply the concept of stratified charge into direct injection gasoline engine, a reflector was adapted on cylinder head. An installation of the reflector in front of the injector nozzle leads the mixture to be rich near spark plug. Therefore, the mixture near the spark plug is locally ich to ignite while the lean mixture is wholly introduced into the combustion chamber. In this paper, the characteristics of combustion is analyzed with the variations of injection pressure and load in a stratified-charge direct injection single cylinder gasoline engine.

  • PDF

PET 라이너를 적용한 공기호흡기용 타입 복합재료 4 압력용기 개발 (Development of Type 4 Composite Pressure Vessel by using PET Liner for Self-contained Breathing Apparatus)

  • 조성민;이승국;조민식;류성기
    • 한국기계가공학회지
    • /
    • 제17권6호
    • /
    • pp.164-169
    • /
    • 2018
  • In this study, we solved the human hazard problem of aluminum liner by applying plastic PET liner which is widely used as a material for food and beverage containers in the market. In order to reinforce dome area by using low strength / high elongation plastic liner, The aluminum boss was covered on the plastic liner surface. In order to predict the performance of the developed product, the structural analysis was carried out by applying the three - dimensional laminated solid element, and the soundness of the product was verified through the prototype performance test.

주조 오스테나이트 스테인리스강 상경계 균열부 산화물 분석 (Analysis of Oxide Layers in Phase Boundary Crack of Cast Austenitic Stainless Steel)

  • 최민재;김성우
    • 한국압력기기공학회 논문집
    • /
    • 제19권2호
    • /
    • pp.171-178
    • /
    • 2023
  • For the phase boundary crack found in the gasket made of cast austenitic stainless steel in the nuclear power plant, the oxide layers were analyzed through SEM and TEM. The results showed that cracks initiated and propagated along the austenite/δ-ferrite phase boundary, the propagation path was changed to penetrate the inside of the phase. The oxide layer located at the periphery of the crack along the phase boundary was identified as a complex multi-layered spinel structure, and Cr-rich carbides were also detected in the oxide. The cracks that propagated inside the austenite matrix were attributed to the presence of high external stresses and impurities.

프랑스 PWR의 격납용기 Vent에 여과기 설치

  • 한국원자력산업회의
    • 원자력산업
    • /
    • 제7권4호통권50호
    • /
    • pp.66-69
    • /
    • 1987
  • 1980년대초에 Wash 1400의 위험성을 분석연구한 프랑스의 안전담당기관과 EdF는 내부압력초과로 격납용기의 파손을 가져올 수 있는 사고가 발생했을 때 대기로 방출될 지도 모를 가스와 Aerosol 누출량을 상당량 줄이기로 목표를 세웠다.

  • PDF