• Journal of Aerospace System Engineering
• /
• v.17 no.4
• /
• pp.34-42
• /
• 2023

This study aims to analyze safety reports received through the recently added SMS safety self-report in the Air Force's "integrated air control management" system, identify hazards, present improvements by region (base), and lay the foundation for future data-based safety management. To identify risk factors, it was first classified by base based on data classified into 16 groups in the autonomous reporting system, and second classified in detail based on the type and description. Risk factors were analyzed for the most reported control cooperation (306) items, and improvements were derived by dividing risk factors into information sharing, regulations, procedures, education, training, and equipment items based on the analysis results. It was confirmed that risk factors and specific improvements vary by base (12), which is important data that can present statistical analysis and the direction of safety management in the flight control field by base (region). In addition, since there is no data-based risk factor analysis study for each specific base (region), it can be used in the future as basic research data for data-oriented safety management.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.23 no.5
• /
• pp.21-27
• /
• 2023

As a means of helping ships navigate safely, navigational aids in operation in the maritime envirionment require periodic management, and due to the nature of the environment, it is difficult to visually check the exact state. As a result, the smart navigation aid system, which improves route safety and operational efficiency, utillizes expertise including sensors, communications, and information technology, unlike general route markings. The communication environment of the smart navigation aid system, which aims to ensure the safety of the navigators operating the ship and the safety of the ship, uses a wireless communication network in accordance with the marine environment. The ship collects the information necessary for the maritime environment on the land and operates. In this process, there is a need to consider the wireless communication security guideline. Basically, based on IHO S-100 a standard for facilitating data exchange and SECOM, which provides an interface for safe communication. This paper research a security system for safe communication in a maritime environment. The security system for the basic interface based on the document was presented, and there were some vulnerabillties to data exchange due to the wireless communication characteristics of the maritime environment, and the user authetication part was added considering the vulnerability that unauthorized users can access the service.

• The Korean Journal of Air & Space Law and Policy
• /
• v.33 no.1
• /
• pp.81-120
• /
• 2018

To promote the aviation safety reporting system that is operated to enhance aviation safety and to utilize related information, it should first be preceded by standards for non-punishment and data protection. It is because the purpose of collection and analysis of aviation safety related data through the aviation safety reporting system is to prevent recurrence of accidents by investigating their causes through collection and analysis of diverse types of information related to aviation safety. Both mandatory and voluntary reporting systems are in operation for aviation safety under the current Aviation Safety Act. It is said that they were introduced to survey causes for accidents and to prevent recurrences. In fact, however, it is hard to expect active implementation of the reporting system for aviation safety unless the reporters are firstly exempted from punishment. Therefore, the system should be improved so that it can satisfy its purpose and the purposes of data collection concerning aviation safety through examination of the purposes of the reporting system. One of the matters that needs to be considered to promote the reporting system should be the scope of aviation safety hindrances presupposed under the current institution. The voluntary aviation safety reporting system differs from the systems of ICAO or the key advanced countries, including the USA and the UK as it limits the target accidents subject to reporting to minor aviation safety hindrances only. That being said, improvements should be made by requiring mandatory reporting of aviation safety hindrances based on their severity while recognizing a greater variety of aviation safety concerns like international standards. Safety actions and sharing of information based on collection and analysis of diverse data related to aviation safety will greatly contribute to enhance aviation safety as the purposes of the reporting system are to explore causes for accidents and to prevent their recurrences. What is most important in this regard is strict data protection and non-punishment principles; compliance with them should be secured. We can hardly expect the successful operation of the system unless the reporter is exempted from punishment and the relevant data is protected as promotion of voluntary reporting is an essential factor for enhancing the safety culture. Otherwise, the current system may induce hiding of relevant facts or data to evade punishment. It is true that the regulation for enhancing safety tends to have limitations or blind spots; nevertheless, it should still be enforced strictly and completely. Technological progresses and mistakes of operators appear in different forms based on individual cases. The consequential damages may amount to a truly severe level. Therefore, we have studied and suggested to the methods of activiation and amendments on the aviation safety reporting system, which is referred for one of the proactive safety management systems. The proposed improvement of the reporting system and introduction of non-punishment for collection of aviation safety data for deploying a preemptive prevention system would serve as the backbone for enhancing aviation safety in Korea.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.24 no.1
• /
• pp.171-182
• /
• 2014

Common Criteria is a scheme that minimize IT products's vulnerabilities in accordance with the evaluation assurance level. SSDLC(Secure Software Development Lifecycle) is a methodology that reduce the weakness that can be used to generate vulnerabilities of software development life cycle. However, Common Criteria does not consider certificated IT products's vulnerabilities after certificated it. So, it can make a problem the safety and reliability of IT products. In addition, the developer and the evaluator have the burden of duplicating evaluations of IT products that introduce into the government business due to satisfy both Common Criteria and SSDLC. Thus, we researched the relationship among the Common Criteria, the static code analysis tools, and the SSDLC. And then, we proposed how to combine SSDLC into Common Criteria.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.16 no.3
• /
• pp.299-310
• /
• 2014

Nationally, tunnel and underground constructions are necessary for the environmental sustainability and the efficient use of land space. For the importance of eco-friendly circumstances, 2-arch or large road tunnel has been designed so far. However, such a 2-arch or large tunnel has problems in terms of cost, constructability, construction period, and maintenance. Therefore, in this study, tunnel behavior and stability of rock pillar according to the pillar width and cover depth for parallel tunnels are investigated by performing FE analysis and using empirical formula. According to the results, Rock pillar is reinforced for distributed vertical load by Tie-Bolt due to unpredicted ground deformation, and the reinforced rock pillar's behaviour from the FE analysis shows a quite good agreement with field measurement. According to ground conditions, if the pillar width of the parallel tunnels is reduced, it can be more efficient in use of the tunnel space compared to previous tunnels.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.15 no.1
• /
• pp.1-8
• /
• 2020

If a dangerous situation arises in a place where out of reach from the human, UAVs can be used to determine the size and location of the situation to reduce the further damage. With this in mind, this paper sets the minimum value of the roll, pitch, and yaw using beta flight to detect the UAV's smooth hovering, integration, and derivative (PID) values to ensure that the UAV stays horizontal, minimizing errors for safe hovering, and the camera uses Open CV to install the Raspberry Pi program and then HSV (color, saturation, Brightness) using the color palette, the filter is black and white except for the red color, which is the closest to the fire we want, so that the UAV detects the image in the air in real time. Finally, it was confirmed that hovering was possible at a height of 0.5 to 5m, and red color recognition was possible at a distance of 5cm and at a distance of 5m.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.13 no.5
• /
• pp.51-60
• /
• 2009

To secure the structural safety of structures and members against earthquakes, the plastic deformation capacity demand of members should be accurately predicted. In the present study, a method for the evaluation of the plastic deformations of members for moment frames was developed. To facilitate the practical use of the proposed method in equivalent seismic design, the plastic deformations of members were evaluated based on the results of elastic analysis, without using nonlinear analysis. The plastic deformation demands of members were formulated as functions of story drift demand, redistributed moment and member stiffness. Story drift demand and moment redistribution were directly determined from elastic analysis. The proposed method was applied to an 8 story-2 bay moment frame, and the predicted plastic deformations were verified using nonlinear analysis. The results showed that the proposed method could be used to accurately predict the member plastic rotations with simple calculations. The proposed method can be applied both to the earthquake design of new structures and to the performance evaluation of existing structures.

• Journal of Korean Society of Disaster and Security
• /
• v.9 no.2
• /
• pp.15-21
• /
• 2016

According to the disaster statistics issued by the Ministry of Public Safety and Security, traffic accidents, fire, collapses and others are classified into twenty-three (23) categories. In the past, disasters were mainly caused by the influence of nature, such as typhoon or drought. On the other hand, as society has become city-centered, social disasters' types, frequencies and scales are becoming more diversified and ever-increasing. However, there are no specific criteria and assessment methods that can measure degrees of social disasters-related risks objectively. Therefore, this study targeted traffic accidents, fire and collapses from major social disasters, utilized data that are related to occurrence rate, scale of casualties and scale of property loss in past eight years, and calculated the disaster risk index using the distance (Euclidean distance) between two points on the 3D spatial coordinates, in order to make the objective assessment by social disaster type possible. These results will enable the objective evaluation of risk index of major social disaster to be used as the foundational data when building the national disaster management system.

• Journal of Cadastre & Land InformatiX
• /
• v.45 no.2
• /
• pp.45-56
• /
• 2015

The main purpose of this investigation is to make up for the limitations of parcel addressing and to seek the application plan of cadastral triangulation point to effective installation of national index numbers. The test-bed has been constructed at the mountainous area located in Nowon-gu, seven cadastral triangulation points within the test-bed was directly applied to this investigation. Each points have been firstly converted from a plane rectangular coordinates to a single plane rectangular coordinates (UTM-K). To verify positioning results achieved from these points, a single plane rectangular coordinates through the Network-RTK was considered. With regards to verification result, maximum coordinate shift was revealed by 6 cm, this level of difference can be satisfied to Article 7, paragraph 2 "the regulation for National Index Number". This means that coordinate transformation applied with cadastral triangulation points can achieve the sastisfied result without local surveying. And also, remarkable effects have been created in terms of financial effectiveness and safe preservation of cadastral triangulation points due to the omission of local surveying.

• Journal of Korean Society of Disaster and Security
• /
• v.12 no.3
• /
• pp.1-11
• /
• 2019

This study selected the national park area of Mt. Seorak in Inje-gun, Gangwon-do, where a lot of debris flow occurred due to the heavy rainfall and conducted a field survey. In addition, topographic spatial data were constructed using the GIS technique to analyze watershed characteristics. For the construction of terrain data after the disaster, the debris flow occurrence section was scanned and the 3D topographic data was constructed using the terrestrial LiDAR. LiDAR terrain data are compared to digital maps(before disaster) to assess precision and topographic data before and after the disaster were compared and analyzed. Debris flow diffusion area was calculated using FLO-2D model and compared debris flow occurred section.