• The Korean Journal of Pesticide Science
• /
• v.16 no.1
• /
• pp.35-42
• /
• 2012

This study was carried out to elucidate the residual characteristics and calculate processing factors of difenoconazole in ginseng and its processed products, such as dried ginseng, red ginseng and their water and alcohol extracts. The pesticide was sprayed onto the ginseng according to its pre-harvest intervals in 2009 (four-year-old ginseng) and 2010 (five-year-old ginseng). Harvested ginseng was processed to dried ginseng, red ginseng and their extracts according to the commercially well-qualified conventional methods provided by the Korea Ginseng Corporation. Limit of detection (LOD) and limit of quantitation (LOQ) of difenoconazole in fresh ginseng were 0.001 and 0.003 mg/kg, respectively. In case of processed ginseng products, their levels were 0.002 and 0.007 mg/kg, respectively. Concentration of difenoconazole in both fresh ginseng and its processed products increased with the experimental period. Processing factors, calculated as a ratio of difenoconazole concentration in processed products to fresh ginseng were found to be 1.71 to 2.17 and 1.62 to 2.03 in case of dried and red ginseng, respectively, while those for their extracts ranged from 1.76 to 2.98. In case of five-year-old dried ginseng and red ginseng as well as their extracts, the ranges of processing factor of difenoconazole were found to be 2.9 to 3.1, 1.9 to 2.2 and 2.4 to 4.7, respectively.

• Journal of environmental and Sanitary engineering
• /
• v.22 no.3
• /
• pp.1-12
• /
• 2007

This study was investigated hazardous substances in agricultural products of baggage by Incheon Port from chinese. We tested 293 kinds of dried red pepper, cereal, sesame, bean, nut, herbal medicine and sesame oil for pesticides residue, mold, tar color, sudan I, II, III, IV, aflatoxin, Pb, Cd, Hg, As and sulfur dioxide residues. Violated samples over standard limits by Korean Food and Drug Administration (KFDA) were 76 dried red pepper over the number of mold and 1 dried red pepper detected red 102 tar color and 1 dried red pepper over the number of mold and detected red 102 tar color simultaneously. And 2 rice, 1 sticky rice, 1 adlay and 1 millet were over lead. Violated herbal medicine were 2 Zizyphi Furctus and 2 Zingiberis Rhizoma over sulfur dioxide residue and 1 Zingiberis Rhizoma over sulfur dioxide residue and cadmium simultaneously. The contents of heavy metals in cereal were as follow; $Pb\;0.000{\sim}0.740mg/kg(0.191{\pm}0.209),\;Cd\;0.000{\sim}0.108mg/kg(0.007{\pm}0.020),\;Hg\;0.000{\sim}4.201mg/kg(0.162{\pm}0.319)$. The contents of heavy metals in herbal medicine were as follow; $Pb\;0.000{\sim}2.480mg/kg(1.130{\pm}0.730),\;Cd\;0.000{\sim}0.761mg/kg(0.044{\pm}0.122),\;Hg\;0.000{\sim}0.157mg/kg(0.022{\pm}0.033),\;As\;0.000{\sim}0.560mg/kg(0.040{\pm}0.082)$. Contents of $SO_2$ ranged $2.0{\sim}1459.4ppm(303.1{\pm}324.2)$.

• Journal of the Korean Professional Engineers Association
• /
• v.28 no.4
• /
• pp.54-75
• /
• 1995

This synthesis has been prepared from a review of literature on Truck Escape Ramps technology and a survey of current practice by state department of transportation. Their locations have been determined usually from a combination of accident experience and en-gineering judgement, but new tools are emerging that can identify needs and sites without waiting for catastrophic accidents to happen. The Grade Severity Rating Systems holds promise in this regard. Design Procedures for truck excape ramps continue to evolve. Gravel arrester beds are clearly the preferred choice across the country Rounded aggregate, uniformly graded in the approximate size range of 13 to 18mm. Tech-nical publications typically have dassified TER types as paved gravity, sandpile, and ar-rester bed ramps. The design speed for vehicle entry into the ramp in critical to the deter-mination of ramp length. An escape ramp should be designed for a minimum entry speed of 130km/hr, a 145km/hr design being preferred. The ramps should be straight and their angle to the roadway align-ment should be as possible. The grade of truck escape ramps show the adjustment of ramp design to local topography, such as the tradeoff of ramp length against earthwork requirements. A width of 9 to 12m would more safety acommodate two or more outof con-trol vehicles. Reguarding comments on the most effective material, most respondents cited their own specification or referred to single graded, rounded pea gravel. The consensus essentially Is that single graded, well -rounded gravel is the most desirable material for use in arrester beds. The arrester beds should be constructed with a minimum aggregate depth of 30cm. Successful ramps have used depths between 30 and 90cm.

• Nuclear Engineering and Technology
• /
• v.25 no.2
• /
• pp.237-247
• /
• 1993

Activity ratio of two radioactive primary fission products which had sufficiently different half-lives was expressed as functions of cooling time and irradiation histories in which average burnup, irradiation time, cycle interval time and the dominant fissile material of the spent fuel were included. The gamma-ray spectra of 36 samples from 6 spent PWR fuel assemblies irradiated in Kori unit-1 reactor were obtained by a spectrometric system equipped with a high purity germanium gamma-ray detector. Activity ratio $^{l44}$Ce $^{l37}$Cs, analyzed from each spectrum, was used for the calculation of cooling time. The results show that the radioactive fission products $^{l44}$Ce and $^{l37}$Cs are considered as useful monitors for cooling time determination because the estimated cooling time by detection of activity ratio $^{l44}$Ce $^{l37}$Cs agreed well with the operator declared cooling time within relative difference of $\pm$5 % despite the low counting rate of the gamma-ray of $^{l44}$Ce (about 10$^{-3}$ count per second). For the samples with several different irradiation histories, the determined cooling time by modeled irradiation history showed good agreement with that by known irradiation history within time difference of $\pm$0.5 year. From this result, it would be expected to be possible to estimate reliably the cooling time of spent nuclear fuel without the exact information about irradiation history. The feasibility study on identification of and/or sorting out spent nuclear fuel by applying the technique for cooling time determination was also performed and the result shows that the detection of activity ratio $^{l44}$Ce $^{l37}$Cs by gamma-ray spectrometry would be usefully applicable to certify spent nuclear fuel for the purpose of safeguards and management in a facility in which the samples dismantled or cut from spent fuel assemblies are treated, such as the post irradiation examination facility.mination facility.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.6 no.3
• /
• pp.53-62
• /
• 1986

For the research on the fatigue fracture behavior in the welded joints of steel structures, base metal specimens and welded ones were selected, and the direct fatigue tests were carried out. Thereafter, fatigue-life (S-N) curves, plastic strain-number of cycles (${\varepsilon}_p$-N) curve, the extrapolated fatigue-life (${\varepsilon}_p$-$N_c$) curve, and da/dN-${\Delta}K$ curves were plotted. By these results the followings were obtained. It was shown that the ratio of fatigue strength at $2{\times}10^6$ cycles of the welded specimen to that of the base metal one was 0.6, and that 0.72 for the base metal and 0.65 for the welded one were the ratio of fatigue strength at $2{\times}10^6$ cycles to yielding stress. The S-N curve for the welded specimen was separated into two sections, the low gradient section and the steep section. As this result, it was shown that the more stress became to reduce, the more the reduction of fatigue strength became to be great. It was shown that fatigue strength at $2{\times}10^6$ cycles from this case was about 83 % of that from the S-N curve plotted with one section. It was thought that the reason was that weld flaw acted greatly on the fatigue strength within the low stress range. It was shown that at the instart of crack initiation plastic strain increased abrupt1y in the case of the welded specimen more than the case of the base metal specimen, and increased abruptly in the upper stress range in both cases. It was shown that the experimental constant ${\alpha}$, 0.42, in the base metal nearly accorded with Manson-Coffin's result, but this made a great difference with the case in the welded specimen. It was thought that it was due to the abrupt change of plastic strain and the influence of weld flaw.

• Korean Journal of Organic Agriculture
• /
• v.17 no.2
• /
• pp.211-226
• /
• 2009

This experiment was conducted to investigate the effect of plant extracts, Chrysanthimum cinerariefolium and Melia azedarach to natural enemies and management of two spotted spider mite, Tetranychus urticae in organic strawberry fields in Jeonnam area. Plant extracts were highly toxic against Phytoseiulus persimilis, but low against Orius laevigatus. In the residual effect against Phytoseiulus persimilis, C. cinerariefolium showed lower level than M. azedarach which safe at least 1 day after spray. Emergence rates of parasitoids were about 40% at seven days after spray. Eretmocerus eremicus has very low emergence rate in treatment of M. azedarach, so it should release after spray of M. azedarach. To control of T. urticae C. cinerariefolium (CC) sprayed first and then sprayed C. cinerariefolium or M. azedarach (MA) for two and three times at a week interval. In the treatment of CC+MA and CC+CC+MA, the density of T. urticae was inhibited by 15th day but increased afterward. In CC+MA+CC, that of T. urticae inhibit from 8 days but also increased after I5th day. In case of spray M. azedarach (MA) first, the treatment of MA+CC, MA+MA+CC, MA+CC+MA suppressed T. urticae from the first day so the densy of T. urticae maintained low level to 30 days after spray. It suggested that M. azedarach should spray first and then alternative spray. When C. cinerariefolium sprayed before and behind to release of P. persimilis, the density of P. persimilis maintained unchanged but could not suppress T. urticae after 8 days which T. urticae increase time. When M. azedarach sprayed, the density of T. urticae rapidly decreased. It was accompanied with P. persimilis so T. urticae did not occur at 8 days after treatment.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.12 no.3
• /
• pp.65-79
• /
• 1992

This study is concerned with the optimal design of two hinged steel arches with I cross sectional type and aimed at the exact analysis of the arches and the safe and economic design of structure. The analyzing method of arches which introduces the finite difference method considering the displacements of structure in analyzing process is used to eliminate the error of analysis and to determine the sectional force of structure. The optimizing problems of arches formulate with the objective functions and the constraints which take the sectional dimensions(B, D, $t_f$, $t_w$) as the design variables. The object functions are formulated as the total weight of arch and the constraints are derived by using the criteria with respect to the working stress, the minimum dimension of flange and web based on the part of steel bridge in the Korea standard code of road bridge and including the economic depth constraint of the I sectional type, the upper limit dimension of the depth of web and the lower limit dimension of the breadth of flange. The SUMT method using the modified Newton Raphson direction method is introduced to solve the formulated nonlinear programming problems which developed in this study and tested out throught the numerical examples. The developed optimal design programming of arch is tested out and examined throught the numerical examples for the various arches. And their results are compared and analyzed to examine the possibility of optimization, the applicablity, the convergency of this algorithm and with the results of numerical examples using the reference(30). The correlative equations between the optimal sectional areas and inertia moments are introduced from the various numerical optimal design results in this study.

• Journal of Animal Science and Technology
• /
• v.52 no.5
• /
• pp.375-382
• /
• 2010

Twelve pigs were used to investigate the effects of polyclonal antibody candidate against abdominal (AAb) and subcutaneous adipocyte membrane proteins (SAb) on body weight, fecaldigestibility and blood metabolites. When AAb and SAb developed by Choi et al. (2010) were injected to pigs, the numerical increase in BW (body weight) occurred at 4 weeks post-treatment, but BW for an entire period was also increased, indicating that the BW increase may not be affected by the antibodies injection. Antibodies treatment did not affect (P>0.05) fecal digestibility of dry matter, crude protein, crude fat and crude fiber. Fecal digestibility of crude ash for control (no treatment) at 2 weeks decreased, and that for non-immunized serum treatmentgroup at 4 weeks post-treatment increased, respectively (P<0.05). However, fecal digestibility of crude ash for AAb and SAb groups did not significantly change. At 4 weeks after the antibodies treatment, blood urea N concentration for AAb and SAb groups was significantly increased (P<0.05). However, these increases may not be caused by the antibodies treatment because similar pattern in blood urea N concentration occurred before the antibodies treatment. Antibodies treatment did not affect concentration of plasma glucose and triglycerides (P<0.05). Compared with control, concentration of plasma total cholesterol for AAb and SAb groups at 4 weeks post-treatment was significantly (P<0.05) decreased. This may suggest that body fat reduction possibly occurs. In conclusion, the AAb and the SAb developed by Choi et al. (2010) may have safety in nutritional physiological metabolism in pigs. Further study on in vivo fat reduction of the antibodies against abdominal and subcutaneous adipocytes of pigs should be required for fat-reduced pork production.

• Korean Journal of Food Science and Technology
• /
• v.39 no.6
• /
• pp.663-668
• /
• 2007

This study evaluated the microbial, nutritional, and rheological changes in potatoes, during storage at room, low, and freezing temperatures for 6 months. No significant changes in total aerobic plate counts were observed for any of the samples in the assessment of microbiological quality changes. For the 4 types of frozen potatoes, yeasts and molds were not found until 24 weeks. The sugar contents of the potatoes stored at room and low temperature ($10^{\circ}C$) increased during the first 4 weeks of storage, but then decreased rapidly thereafter; while those in the frozen potatoes did not change significantly throughout the 48 weeks. The vitamin C, B1, and B2 contents of the potatoes stored at room and low temperature had decreased significantly after 4 weeks of storage, however, the levels in the frozen potatoes did not change rapidly. The weight, volume, and hardness of the frozen potatoes changed much less as compared to the potatoes stored at room and low temperature over the 48 weeks of storage. Finally, the cohesiveness of all the samples, except for the frozen mashed potatoes, did not change during storage.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.34 no.8
• /
• pp.1164-1168
• /
• 2005

Korean traditional deer decoction (Nogjungtang), composed of oriental herbs and almost deer parts, has been used as an important resource for human health. For basic studying on Nogjungtang, this experiment was conducted to evaluate nutritional effects of Nogjungtang, and estimate its effect on growth, food efficiency, organ development and hematological indices in growing and adult Sprague-Dawley rats. The rats were divided into three groups as follows; control: non-supplementation, Notiungtang I: recommended dose, and Nogjungtang II: thrice recommended dose. Nogjungtang was composed of various general nutrients with up 93$\%$ moisture.Crude protein is the highest value as 22.78$ \%$, Mg is a major mineral as 0.48$\%$ compared to other minerals, and methionine and proline are higher by 1.31 and 1.67$\%$ than other amino acids based on dry matter, re-spectively. In both growing and adult rats, there were no significant difference in body weight gain and feed intake between the control and Nogjungtang groups. Also, organs weights (liver, heart, kidney and stomach) and hematological indices (WBC, RBC, Hb, Hct and Platelet) did not show statistically significant differences among the experimental groups. However, all of experimental rats were normal growth without hypertrophy or negative development of organs by Nogjungtang. Hematological indices maintained in normal value by thrice recommended dose of Nogjungtang. The average body weight of each treatment groups showed similar levels at end of experiment. In case of the feed efficiency ratio (feed intake/body gain), the growing rats showed 6.00, 5.81 and 5.99 and adult rats showed 9.03, 8.98 and 9.10 in control, Nogjungtang I and Nogjungtang II, respectively. In conclusion, although further investigation of Nogjungtang should be performed in the functions registered in many ancient literatures, Nogjungtang is physiologically safe and may have potential as candidate food for human health.