• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.2 no.1
• /
• pp.1-11
• /
• 2004

The hot cell facility for research activities related to the lithium reduction of spent fuel, which is designed to permit safe handling of source materials with radioactivity levels up to 1,385 TBq, is planned to be built. To meet this goal, the facility is designed to keep gamma and neutron radiation lower than the recommended dose-rate in normally occupied areas. The calculations peformed with QAD-CGGP and MCNP-4C are used to evaluate the proposed engineering design concepts that would provide acceptable dose-rates during a normal operation in hot cell facility. The maximum effective gamma dose-rates on the surfaces of the facility at operation area and at service area calculated by QAD-CGGP are estimated to be $2.10{\times}10^{-3}, 2.97{\times}10^{-3} and 1.01{\times}10{-1}$ mSv/h, respectively. And those calculated by MCNP-4C are $1.60{\times}10^{-3}, 2.99{\times}10^{-3} and 7.88{\times}10^{-2}$ mSv/h, respectively, The dose-rates contributed by neutrons are one order of magnitude less than that of gamma sources. Therefore, it is confirmed that the radiological design for hot cell facility satisfies the Korean criterion of 0.01 mSv/h for the operation area and 0.15 mSv/h for the service (maintenance) area.

• Korean Journal of Food Science and Technology
• /
• v.47 no.3
• /
• pp.306-320
• /
• 2015

This survey was carried out in 2014 to estimate the pesticide residue levels in commercial environment-friendly agricultural products in Seoul metropolitan area. Pesticide residues in 27 commodities were examined and analyzed using LC-MS/MS, which can simultaneously detect up to 85 pesticides. A total of 441 samples were collected and analyzed. Among the detected samples, the residue levels in 1.2% of organic agricultural products and 2.2% of pesticide-free agricultural products exceeded the maximum residue limits (MRLs); hence, 1.8% of the total samples exceeded the MRLs. The safety of the detected pesticides was assessed by monitoring the acceptable daily intake level (ADI) and acceptable dietary exposure (ADE) to the pesticides via consumption of the commodities. ADI and ADE are found to be 0.07728-9.46530% and 0.00141-0.17210%, respectively, which means that the residual pesticides in the environmental-friendly agricultural products in Korea are below the safe limit and therefore, pose no potential public health risks.

• The Journal of the Korea Contents Association
• /
• v.9 no.6
• /
• pp.247-255
• /
• 2009

This study aims to provide basic data for establishing the safety and health plan by investigating the exposure conditions in the facilities registering business about handling radiations and radioactive isotopes in Korea. dose levels(working space, worker location) of the workers in 153 facilities were measured using surveymeter, and individual exposure concentration[(shallow dose(SD), depth dose(DD)] in 27 facilities using thermal luminescence dosimeter(TLD). In accordance with the measurement results by business type[fire fighting prevention business(FFPB, n=10), financial insurance business(FIB, n=3) and other facilities(n=140)] using surveymeter, those three business type groups showed difference (p<0.000). Dose levels of worker location for FFPB and FIB were significantly higher than 10.0 ${\mu}Sv$/hr, the allowable standard for radiations and radioactive isotopes, and they were higher 109.3 times(p<0.000) and 187.5 times(p<0.000) than those in other facilities. The concentration of TLD[FFPB(n=10), other facility (n=17)] in DD of FFPB was significantly higher than that in other facility(p=0.05). In accordance with the analysis result on relationship between surveymeter and TLD, the dose on working space and worker location(r=0.406, p<0.05), worker location dose and SD(r=0.453, p<0.05), worker location dose and DD(r=0.553, p<0.01), and SD and DD(r=0.927, p<0.001) had all related each other. It is urgently required to change FFPB and FIB from the facilities requiring registration for handling radiations and radioactive isotopes to the facilities that shall get permission for handling radiations and radioactive isotopes by reestablishing the legal administration area, for safety and health of radiation occupants.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.22 no.3
• /
• pp.611-619
• /
• 2021

Porous asphalt pavement (PAP) has many functions, such as reducing accidents and decreasing noise. On the other hand, vulnerability is inevitable because PAP contains approximately 20% porosity. This study evaluated the effects of the maximum aggregate size (MAS), temperature, and porosity on the PAP durability. The indirect tensile strength measures durability. This study tested the samples that stayed dry and were moisturized by freezing and thawing for mixtures having the same porosity of 20% and MAS of 13mm, 10mm, and 8mm. The same test was performed on a mixture of 20% and 22% voids made of the same material with a MAS of 10mm. As a result, for 20% porosity, significant differences in the changes in MAS and temperature were found. A clear difference was observed between 8mm and 13mm under dry conditions, but there were no other significant differences in the MAS change. Furthermore, there was a clear difference in temperature for the change in porosity and temperature, but the gap in 2% porosity at 20% did not show a clear difference. Therefore, it is necessary to develop a more durable PAP through quantitative evaluations of the factors affecting the PAP durability.

• Journal of the Korean Institute of Gas
• /
• v.27 no.2
• /
• pp.1-6
• /
• 2023

PE piping, which has advantages in terms of construction convenience and economy, is widely used for underground burial in the domestic urban gas field. These PE pipes use squeeze-off in many sites to block gas flow during maintenance and repair work. Squeeze-off refers to a method of compressing a PE pipe to block fluid flow, and damage may occur due to the nature of construction in which the pipe is deformed by physical force. In order to prevent damage to PE pipes due to squeeze-off, the main points to be reflected in the squeeze-off operation procedures such as proper compression range, use pressure, and diameter were derived through damage assessment and confidential test according to the compression rate. The compression experiment for PE pipe damage assessment was conducted while changing the compression rate (20%~40%), the pressure of use (2.8 kPa, 25 kPa, 70 kPa), and the pipe diameters (63 mm, 90 mm, 110 mm). As a result of damage assessment according to the compression rate, damage occurred in pipes with compression rates of 45%(110mm) and 73%(63mm), which are for analyzing the effect of excessive compression. In addition, the leakage test was conducted using Ar(argon) during the squeeze-off, and as a result of the experiment, leakage occurred under the conditions of 70kPa and 110mm of pipe. As a result of this study, it was confirmed that squeeze-off for airtightness should be carried out in pipes within a range not exceeding 25 kPa and 90 mm pipes, and the appropriate compression rate to prevent damage to PE pipes is 30%.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.46 no.6
• /
• pp.464-470
• /
• 2018

In this paper, a practical method of estimating the flap hinge moments which change according to the aircraft flap operations was introduced. For the flap design, the hinge moment derived by structural load analysis and wind tunnel tests was able to be compared with the real flight hinge moment, and the static safety of the flap structure could be verified though this comparison. In order to perform the tests, two strain gauges were installed on the flap hinge and an onboard device for aircraft load monitoring was utilized. Through the ground test, the correlation between the strain and the moment of the flap hinge was calibrated with analytic and finite element analysis. During the flight test, strain signals together with the flap deflection angles and airspeed were recorded. Finally, the flight hinge moments could be predicted by the measured strain which was calibrated with the analytic and the finite element analysis.

• Proceedings of KOSOMES biannual meeting
• /
• 2018.06a
• /
• pp.187-187
• /
• 2018

• Nuclear industry
• /
• v.16 no.5 s.159
• /
• pp.30-41
• /
• 1996

고리 4호기가 지난 4월 5일 국내 최장인 423일간(95. 2. 8$\~$96. 4. 5)의 한 주기 무정지 안전 운전을 달성하고 계획 예방 정비를 위해 정지했다. 이러한 쾌거는 지속적인 설비 환경 개선과 철저한 계획 예방 정비를 통해 기계고장률을 제로화하고, 각종 훈련을 통해 운전원들의 운전 능력과 비상 대응 능력을 향상시킨 결과라 할 수 있다. 국내 최장 OCTF 달성의 성과 의의와 과정을 들어본다.

• Journal of the Korean Society of Safety
• /
• v.17 no.3
• /
• pp.13-21
• /
• 2002

The tincture toughness is evaluated by using U(compact tension) and 3PB(three point bending) specimens of AI alloys far propulsive engine. To evaluate the static fracture toughness, strain gage method is used. The static fracture toughness obtained from the strain measurement is compared with the results by ASTM standard and FEM analysis. For the reliable evaluation of fracture toughness, strain gages are attached at various positions.

• Proceedings of the Korean Institute of Industrial Safety Conference
• /
• 1997.05a
• /
• pp.13-18
• /
• 1997

구조물의 사용수명은 흔히 균열의 생성 및 성장과 크게 관련지어지는데, 이는 균열의 존재가 기계나 구조물의 성능에 장애를 줌은 물론 기계 전체에 치명적인 손상을 입힐 수 있기 때문이다. 그 동안의 파괴역학분야의 연구에서는 균열이 존재하는 부재의 주 모델을 해석의 편의상 두께가 균일한 부재로 간편화하여, 주로 이차원적으로 해석을 해왔다. 그러나, 실제 기계 및 구조물에는 두께가 일정한 부재 뿐 아니라, 두께가 일정하지 않고 변화하는 부재(이하 변호부재라 한다)가 현실적으로 폭넓게 사용되고 있다. (중략)