• Journal of the Korean Data and Information Science Society
• /
• v.27 no.1
• /
• pp.203-215
• /
• 2016

This study was performed in order to investigate the effect of breast milk on pain relief in newborn during heel lancing. Nonequivalent control group pretest-posttest design by double blinded experiment was used. 50 neonates were randomized to receive breast milk (experimental group, n=25) or no treatment (control group, n=25) before undergoing heel lancing. Informed consent was obtained from parents of 50 neonates. Neonatal infant pain scale (NIPS), respiration rate, heart rate, oxygen saturation, and crying duration were used to assess subjects' pain reaction. Data were analyzed using SPSS 18.0. The experimental and control group showed a statistically significant differences in NIPS score (F=28.89, p<.001), heart rate (F=14.03, p<.001), respiration rate (F=4.79, p=.001), oxygen saturation (F=2.69, p=.027), and crying duration (t=-8.78, p <.001) at each time points (during heel lancing, right after heel lancing, 1, 2, 3 minutes after heel lancing). The result suggest that oral administration of expressed breast milk is safe and natural agents for reducing procedural pain of neonates. Another clinical trial study with more samples is recommended.

• Journal of the Korea Concrete Institute
• /
• v.28 no.6
• /
• pp.673-683
• /
• 2016

In recent years, frequent terror or military attack by explosion, impact, fire accidents have occurred. Particularly, World Trade Center collapse and US Department of Defense Pentagon attack on Sept. 11 of 2001. Also, nuclear power plant incident on Mar. 11 of 2011. These attacks and incidents were raised public concerns and anxiety of potential terrorist attacks on major infrastructures and structures. Therefore, the extreme loading researches were performed of prestressed concrete (PSC) member, which widely used for nuclear containment vessel and gas tank. In this paper, to evaluate the blast resistance capacity and its protective performance of bi-directional unbonded prestressed concrete member, blast tests were carried out on $1,400{\times}1,000{\times}300mm$ for reinforced concrete (RC), prestressed concrete without rebar (PSC), prestressed concrete with rebar (PSRC) specimens. The applied blast load was generated by the detonation of 55 lbs ANFO explosive charge at 1.0 m standoff distance. The data acquisitions not only included blast waves of incident pressure, reflected pressure, and impulse, but also included displacement, acceleration, and strains at steel, concrete, PS tendon. The results can be used as basic research references for related research areas, which include protective design and blast simulation under blast loading.

• Journal of the Korean Geotechnical Society
• /
• v.32 no.11
• /
• pp.83-96
• /
• 2016

The surface settlement of the back ground of a braced wall due to the ground excavation has the great influence on the safety of the surrounding area. But it is not easy to predict the settlement of the surrounding area due to proud excavation. Estimation of the settlement of the surface ground induced by the deformation of the braced wall is performed by FEM and empirical method (Peck, Clough etc). In this research, surface settlement of the back ground braced wall depending on the joint dips in rocks during excavating the composit ground was measured at the large scale model test (standard: $0.3m{\times}0.3m{\times}0.5m$). The scale of model test was 1/14.5 and the ground was excavated in ten steps. Earth pressure on the braced wall and ground surface settlement on the back ground of a braced wall were investigated. The surface settlement during the excavation depended on the joint dips in rocks on of the ratio of rock layer. Maximum earth pressure and maximum surface settlement were masured at the same excavation step. In accordance with the increase of the rock layer dips and rock layer ratio, the ground surface settlement increased. The maximum ground surface settlement was 17 times larger at 60 degree joint dips in rocks than that of the horizontal ground conditions. And the position of the maximum surface settlement by empirical method was calculated at the point, which was 17%~33% of excavation depth. In accordance with the increase of the rock layer dips and rock layer ratio, the ground maximum surface settlement increased. The ground surface settlement of composite ground is smaller than that of the empirical.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.26 no.3
• /
• pp.573-586
• /
• 2016

With the adoption of cloud computing, the number of companies that take advantage of cloud computing has increased. Additionally, various of existing service providers have moved their service onto the cloud and provided user with various cloud-based service. The management of user authentication and authorization in cloud-based service technology has become an important issue. This paper introduce a new technique for providing authentication and authorization with other inter-cloud IAM (Identity and Access Management). It is an essential and easy method for data sharing and communication between other cloud users. The proposed system uses the credentials of a user that has already joined an organization who would like to use other cloud services. When users of a cloud provider try to obtain access to the data of another cloud provider, part of credentials from IAM server will be forwarded to the cloud provider. Before the transaction, Access Agreement must be set for granting access to the resource of other Organization. a user can access the resource of other organization based on the control access configuration of the system. Using the above method, we could provide an effective and secure authentication system on the cloud.

• Journal of Navigation and Port Research
• /
• v.41 no.4
• /
• pp.215-228
• /
• 2017

Taking a look at recent trends of port cities, many port cities in the world have been shedding new light on the function being kept by existing port spaces, caused by changes of industrial structure according to the stream of the times, developments of surrounding areas, and etc., and we can see that its meaning also has been changing. However, in case of domestic port spaces they are in the real situation not responding to those movements quickly. Therefore, unlike the existing zoning system dividing functionally urban spaces according to use simply, in this study FBCs getting the timelight recently as a system capable of reflecting spatial characteristics at the maximum have been utilized as a measure for solving current problems of urban spaces. The purpose of this study is to propose the direction of urban planning approach that harmonizes the whole harbor space by strengthening the interlinkage between heterogeneous spaces of port area and port area using FBCs. FBCs are institutional devices that are proposed and implemented in the United States to reflect the unique characteristics of the space, that is, the location and the uniqueness, and the pedestrian-oriented space planning.

• Clean Technology
• /
• v.20 no.4
• /
• pp.433-438
• /
• 2014

There is an increasing interest in the development of rechargeable batteries suitable for use in both hybrid electric vehicles and energy storage systems that require higher charge & discharge rates, bigger battery sizes and increased safety of the batteries. Spinel-type lithium titanium oxide ($Li_4Ti_5O_{12}$) as a potential anode for lithium ion batteries has many advantages. It is a zero-strain materials and it experiences no structural change during the charge/discharge precess. Thus, it has long cycle life due to its structural integrity. It also offers a stable operation voltage of approximately 1.55 V versus $Li^+/Li$, above the reduction potential of most organic electrolyte. In this study, Ru added $Li_4Ti_5O_{12}$ composites were synthesized by solid state process. The characteristics of active material were investigated with TGA-DTA, XRD, SEM and charge/discharge test. The capacity was reduced when Ru was added, however, the polarization decreased. The capacity rate of $Li_4Ti_5O_{12}$ with Ru (3%, 4%) addition was reduced during the charge/discharge precess with 10 C-rate as a high current density.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.31 no.3D
• /
• pp.363-373
• /
• 2011

With rapid economic development, general demand and interest in surroundings that consist of our lives have grown gradually. In addition, as there has been increased social interest in creating landscape of roads, which considers all important factors from the user's view including accessibility, safety, and psychological stability, efforts to improve quality of roads are required. Therefore it is needed to establish standards on safe and comfort road design based on sensibility satisfaction of road users rather than based on standardized road design guidance from the engineering perspective. To this end, research was carried out to analyze sensibility satisfaction of users about road landscape focused on elements of road cross section in a city. It identified relation between sensibility satisfaction and the elements by using principal and cluster analysis, and the multiple regression models. It also found that user's satisfaction about roads and a road landscape is high with road width (3~5 meters), clear zone (2.2~3.9 meters), road central garden (1.05~1.9 meters), shoulder (0.55~1.43 meters), median (0.65~1.625 meters), the number of travel lanes (2~5), height of trees at the central garden (6.4~15 meters) and height of buildings surrounding roads (18~44 meters or 6~15 floors).

• Composites Research
• /
• v.29 no.1
• /
• pp.40-44
• /
• 2016

Nuclear fuel cladding used in a nuclear power plant must possess superior oxidation resistance in the coolant atmosphere of high temperature/high pressure. However, as was the case for the critical LOCA (loss-of-coolant accident) accident that took place in the Fukushima disaster, there is a risk of hydrogen explosion when the nuclear fuel cladding and steam reacts dramatically to cause a rapid high-temperature oxidation accompanied by generation of a huge amount of hydrogen. Hence, an active search is ongoing for an alternative material to be used for manufacturing of nuclear fuel cladding. Studies are currently aimed at improving the safety of this cladding. In particular, ceramic-based nuclear fuel cladding, such as SiC, is receiving much attention due to the excellent radiation resistance, high strength, chemical durability against oxidation and corrosion, and excellent thermal conduction of ceramics. In the present study, cladding with $SiC_f/SiC$ protective films was fabricated using a process that forms a matrix phase by polymer impregnation of polycarbosilane (PCS) after filament-winding the SiC fiber onto an existing Zry-4 cladding tube. It is analyzed the oxidation and microstructure of the metal cladding with $SiC_f/SiC$ composite protective films using a drop tube furnace for thermal shock test.

• Food Science and Preservation
• /
• v.7 no.4
• /
• pp.409-413
• /
• 2000

Previously, the methanolic extracts of thirty Korean medicinal plant seeds were screened for tyrosinase inhibitors using a rapid and simple TLC method, which was superior to a conventional spectrophotometrical in vitro assay. As a result, the methanolic extracts of Thuja orientalis seeds was found to have strong tyrosinase inhibitory activity. To isolate active tyrosinase inhibitors, the seeds were defatted with n-hexane under reflux, and then extracted twice with methanol under reflux at 90$^{\circ}C$. The methanolic extract was evaporated to a small volumn in vacuo, and then successively fractionated with ether, ethyl acetate and n-butanol. The ether extract showing significant tyrosinase inhibitory activity was solubilized with 5% NaHCO$_3$and then acidified with 6N HCI. The ether souble acidic fraction was successively ohromatographed on silica gel, Sephadex LH-20 and preparative TLC. Among four compounds isolated, two of them showed stronger tyrosinase inhibitory activity, comparable to that of L-ascorbic acid (IC$\sub$50/=28$\mu\textrm{g}$/$m\ell$). These results suggest that Thuja orientalis seeds may be useful as potential sources of antibrowning agents in fruits and vegetables, and anti-melanoma agents in cosmetics and phamaceuticals.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.9 no.4
• /
• pp.145-152
• /
• 2009

Domestic Kori-1 MCR was partially modified in 2007 and will be renovated entirely in 2013. Digital devices partially replacing original analog devices have been introduced and standard alone computer systems such as SPDS have been integrated into the plant computer. Upgrading KSNP's MCR based on the ditalization is planned for 2015. However, the site engineers and operators are reluctant to the advanced systems. Therefore, a prototype for the KSNP's advanced MCR has been developed to increase the acceptance level of the operators and field engineers and also, to evaluate user interfaces and I&C architecture. For enhancing support of the operators' work, a P&ID based display system composed of multi-layers, which are linked through a context sensitive menu each other, has been adopted. The $1^{st}$ layer displays a simplified P&ID, the $2^{nd}$ layer control related diagrams such as controllers and logic diagrams, the $3^{rd}$ layer trends, etc. The end point view of MCR for KSNP is also suggested considering reliability and operability of the digital systems. Additionally, modernization strategies over the overhaul periods, that do not have much impact on operation and configuration efforts are suggested.