• 건축구조
• /
• v.15 no.3
• /
• pp.35-36
• /
• 2008

• The Safety technology
• /
• no.149
• /
• pp.18-19
• /
• 2010

국내 최초로 고강도 콘크리트 파일(PHC)을 개발 공급하고 있는 대림C&S 충주공장의 안전관리자로 근무하고 있는 장수현 안전관리자, 각종 건축물이나 구조물을 짓기 위해서는 연약한 지반에 반드시 콘크리트 파일을 시공하여 지지대를 만들어야 하듯이, 이곳의 안전에 있어서도 튼튼한 지지대 역학을 하고 있는 그를 만나 11년 간 경험한 안전 이야기를 들어보았다.

• Journal of Korea Ship Safrty Technology Authority
• /
• s.26
• /
• pp.4-23
• /
• 2009

선체용 복합재료 및 구조용 접착제와 신공법인 진공 성형법으로 건조한 레저선박에 강화플라스틱 구조기준을 그대로 적용하기에는 무리가 있으며, 따라서 복합재료, 수지, 접착제 및 진공 성형법 등 현장조사를 토대로 복합소재 및 접착제를 이용한 시험편을 제작하여 복합재료의 기계적 특성, 구조용 접착제에 대한 신뢰성 평가 및 국내외 기준 비교 검토를 통한 국내 실정에 적합한 검사기준을 제안하고자 한다.

• Proceedings of the Korean Institute of Industrial Safety Conference
• /
• 2002.11a
• /
• pp.101-104
• /
• 2002

직물구조 복합재료는 일방향 섬유강화복합재료에 비해 변형능력이나 인장강도가 우수하므로, 항공우주, 첨단 산업 기기에 적용될 뿐만 아니라 다른 광범위한 분야에서 사용되고 있으나 복잡한 강화구조를 가지기 때문에 그 역학적 손상거동은 파악하기가 쉽지 않다. Uetsugi 등은 직물구조 CFRP 복합재에 대하여 미세구조를 고려한 유한요소모델을 제안하여 손상진전 해석하였고, 지금까지 많은 연구자에 의해 여러 가지 수법이 제안되어져 왔으나, 아직까지 명확한 파괴거동 해석수법이 확립되어 있지 않다.(중략)

• Computational Structural Engineering
• /
• v.8 no.1
• /
• pp.4-12
• /
• 1995

원자로 격납건물(Reactor Containment Bldg)은 정상가동시는 물론 냉각재상실사고(LOCA)를 포함하는 설계기준사고(DBA) 및 설계기준지진(DBE) 발생시 구조물 자체의 건전성 확보는 물론 주기기(NSSS Equipment)를 포함하는 안전관련 계통 및 기기를 안전하게 보호/지지하므로써 핵누출을 방지하여 발전소 종사자를 포함하는 국민의 재산과 생명을 보호하는 역할을 하는 원자력발전소에서 가장 중요한 구조물이다. 원자로 격납건물은 압력용기(Pressure Vessel : 설계내압 5 psi 이상인 용기)로 설계되는 격납용기와 1, 2차 차폐구조 등의 내부구조물로 구성되는데 이 중 본 소고에서는 격납용기의 해석 및 설계 그리고 구조건전성 시험 및 사용중검사에 대해서만 간략하게 기술한다.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.21 no.1
• /
• pp.34-39
• /
• 2015

KCG, responsible Agency of maritime SAR operation has been known to address the marine casualties well, however, it was criticized because KCG failed to take prompt and effective response to the recent Ferry disaster at the very early stage. In this regards, the authors analyze the characteristics of marine incident with historical data, and also review and examine the national SAR system focusing on SAR coordination and human resources to make recommendation and suggestion in order to minimize the loss of lives to future marine incidents. As a result, KCG shall augment its capabilities, inter alia, fast libeboats and rescue helicopters for prompt response to marine incidents at the coastal waters, and KCG shall re-adjust the establishment of Rescue Coordination Center to improve operational problems of current system in accordance with IMO guidance, KCG is required to introduce mandatory training, qualification and certificate system to enhance the professionalism of SAR personnel.

• Journal of the Korean Society for Railway
• /
• v.13 no.5
• /
• pp.469-475
• /
• 2010

In this paper, the structural integrity and fatigue strength for the bogie frame of Monorail being developed in domestic was evaluated. Presently, the standard of evaluation for the bogie frame of monorail was not regulated. Therefore, the evaluation of the structural integrity and fatigue strength for the bogie frame was performed on the basis of the UIC 615-4 standard. The structural integrity of the designed bogie frame was evaluated by displacement and Von-Mises stress under each load conditions. And the fatigue strength was evaluated by combined main in-service load conditions specified at UIC 615-4 standard and it was compared with result of fatigue analysis using winLIFE v3.1 with the function of batch processing. The results shows that the structural integrity and fatigue strength of the designed bogie frame was satisfied, and the fatigue analysis using batch processing was more effective than conventional fatigue analysis using combined load conditions.

• Aerospace Engineering and Technology
• /
• v.7 no.1
• /
• pp.15-23
• /
• 2008

This paper describes the structural analysis results of KARI General Small-scaled Rotor Test System (GSRTS) operated in KARI to verify operational safety. This GSRTS was developed to conduct a froude and mach small-scaled rotor test. This analysis was performed to investigate the structural Factor of Safety for the various small-scale rotor system like articulated or hingeless rotor and to check the operational capability using given operational design load. Specially, drive system has several bearings, mechanical gears, shaft, etc. and these parts must be required to achieve an operational safety. The calculation was done by using geometric data and material properties by analytical method. This rotor test system should be operated within these calculated Factor of Safety. Furthermore, the operational limitation should be defined as applied to small-scale rotor system of KUH in future.

• 건축구조
• /
• v.16 no.3
• /
• pp.69-69
• /
• 2009

• 건축구조
• /
• v.21 no.5
• /
• pp.9-23
• /
• 2014